Bosch WAS32461GB User manual

1 2 3 4 5 6
]7- 90 °C V(Temperature) Select the temperature ( 7=cold)
1 - 24h (Finished in) Programme end after
cc- 1400* c(rpm) Select the spin speed (* mo del-dependent) or (Rinse hold
=n of inal spin, laundry remains in the water after the final r inse, ---appears in the display panel).
Status indicators Programme status indicators:
1üü2üücü-¯- Wash, rinse, spin, progra mme duration or end (-¯-)
(Childlock apage 5
,Open the washing machine door, add laun dry apag e 4, 5
Programme selector
Display panel /
Options buttons Start/
Reload
Additional
functions
Sort and load the laundry
Follow the manufacturer's care i nformation.
According to the information on th e care labels.
According to type, colour, level of soiling and temperature.
Do not exceed the maximu m load apage 7.
Observe the important information apage 9.
Insert items of laundry of varying sizes.
Close the washing machine door. Take c aren ot to trap items of laundry between the washing
machine door and the rubber seal.
Add detergent and care product
Measure according to:
The amount of laundry, level of soiling, water hardness (ask your water s upplyc ompany) and
manufacturer's instructions.
On models without an insert for liquid detergent:
Pour liquid detergent into the app ropriate dispenser and place in the drum.
During operation, open the detergent drawer with care.
Individual settings
ʑSignal
ʑ$Start/Reload
To start the programme or to subsequentl y load additional laundry, and to activate/deactivat e the childlock.
1. Activate the
setting mode for
signal volume
Set to •1 step, the
display panel
lights up
Press and
hold +1 step,
release
Set to •
Button signals Information signals
Set the
volume*
1 step Set the
volume*
*you may need to select the function several times
2. Set the
volume for ...
skip
Insert for liquid detergent (depending on model), page 10
Compartment II:detergent for main wash,
Water softener, bleach, stain remover
Your washing machine Intended use
Contents Page
ʔIntended use ..........................................................................................................................1
ʔProgrammes ..........................................................................................................................1
ʔSetting and adjusting the programme .............................................................................3
ʔWashing ..............................................................................................................................3/4
ʔAfter washing ........................................................................................................................4
ʔIndividual settings ............................................................................................................5/6
ʔOverview of programmes ...................................................................................................7
ʔSafety instructions ................................................................................................................8
ʔConsumption values ............................................................................................................8
ʔImportant information .........................................................................................................9
ʔInsert for liquid detergent .................................................................................................10
ʔCare .......................................................................................................................................10
ʔInformation on the display panel ....................................................................................10
ʔInstructions for blockages ................................................................................................11
ʔWhat to do if..................................................................................................................12/13
ʔEmergency release.............................................................................................................13
ʔAfter-sales service...............................................................................................................13
Environmental/savin gs tips
– Always fil l the washing machine with a maximum amount of l aundry for
the relevant programme.
– Wash no rmally soiled laundry without a prewash.
–Instead of Cottons LF90 °C,select the Cottons LF60 °C programme and
the additional ĈEco Perfect function.Comparable c leaning result with
significantly lower energy consumption.
– Measure th e detergent according to the manufactur er's instructions and water
hardness.
– If you want to dry the laundry in the tumble dryer afterwards, select a spin speed
suggested by the dryer manufacturer.
Preparation Before was hing for the first time
Run a wash cycle without any laundry ap age 9
Set** and adjust the programme 1
2
Washing
Compartment ~:fabric softener, starch
Compartment I:detergent for prewash
ʔFor domestic use only
ʔFor washing machine-washable fabrics and hand-washable wool in
detergent solution
ʋTo be operated with cold drinking water and commercially available
detergents and care products which are suitab le for use in washing
machines.
– Do not leave children unattende d near the washing machine.
– The washing machine is not to be usedby child renor persons
not familiar with the operating instructions.
– Keep pets away from the washing machine.
Dilute thick fabric softener and conditioner with water.
This prevents blockages.
Detergent drawer
with compartments I, II, ~Control panel
Washing machine
door handle
Service flap
Washing machine door
Correct installation according to th e separate
Installation instructions.
Check the machine
– Never use a da maged machine.
– Inform t hea fter-sales service.
Connect the mains plug
– Make sure your hands are dry.
– Take hold of the plug only.
Turn the tap on
**If the (symbol is lit in the d isplay
panel, the childlock is active
aDeactivate it, pa ge 5.
Additional functions and options b uttons
aIndividual settings, page 5
Press $Start/Reload
Washing
End of programme when ...
... the $Start/Reload button is off and -¯-appears in the
display panel.
If the display panel lighting is off, press any button
aEnergy-saving mode, page 5.
Cancel the programme
Programmes at high tem peratures:
–To cool the laundry: Select Rinse .
–Press $Start/Reload.
Programmes at lower temperatures:
–Select Spin or Drain >.
–Press $Start/Reload.
Change the programme if...
... you have selected the wrong pro gramme by mistake:
– Reselect th e preogramme.
–Press $Start/Reload. The new programme sta rts from the
beginning.
Add laundry when ... apage 5
... $Start/Reload is pressed and in the display panel both §+,symbols are then lit.
If ǯis lit, the w ashing machine door cannot be opened.
Select the $Start/ Reload button.
Individual settings
ʑOptions buttons
The spin speed and temperature can be cha nged before and during the selected programme. The effects dep end on
the programme progress.
ʑV(Temperature °C)
You can change the displayed washing temp erature. The maximum washing temperature that can beselected depends
on the programme that has been set.
ʑ(Finished in)
Whenyou select the programme, the relevantprogramme duration is displayed.Y oucan delay the start of the programme
beforeit begins. The "Finished in" timecan be set in incrementsof one hour up to a maximum of 24hours. Press the
(Finishedin) button repeatedly until the desired number of hours is displayed (h = hour). Press $Start/Reload.
ʑ(Spin speed in rp m) / (Rinse hold = n o final spin)
You can change the spin s peed shown or select c(Rinse hold = no final spin, laundry remains in the water after the
final rinse, ---appears in the displa y panel). You can change the spin speed shown. The ma ximums electable spin
speed depends on the model and on whi ch programme is currently selected.
ʑAdditional function s aand overview of p rogrammes, page 7
ĉSpeed Perfect Forwashing in a sh orter time with a washing result comparable to that of the standard pro-
gramme. Maximum load aOverview of programmes , page 7.
ĈEco Perfect For saving energy with a washing result comparable to that of the sta ndardp rogramme.
SReduced Ironing Special spin sequence with subsequent fluffing. Gentle final spin at reduced speed.
Residual moisture in the laundry is inc reased slightly.
=Aqua Plus Additional ri nse cycle. Increased water level. For areas with very soft water or for further
improving the washing result.
ʑChildlock
(in the display panel You can lock the washing machin e to prevent the functions you have set from being ch anged
inadvertently.
ON/OFF: after the start/end of the program me, press and hold $Start/Reload for approx.
5 seconds.
Note: The childlock can remain activated until you wish to start thenext progr amme,even after
switching off the machine.
Then you can deactivate the childlock before starting the programme and activate it again as
necessary once the programme has started.
Note:
–The (symbol is lit: Childlock active.
–The (symbol flashes: Childlock active and th en the programme selector is altered.
To prevent the programme from stopping, tu rn the programme selector back to the original
programme, the (symbol is lit again.
ʑAdd laundry
§+o,in the display panel If you want to add additional items of laundry after the programme has started, press the
$Start/Reload button. The machine checks w hether adding laundry is possible.
§+,are lit: Addin g laundry is possible.
ǯflashing: Wait until §+,are lit.
Note: Only open the washing machine door when both the §+,symbols are lit.
ǯ: It is not possible to add laundry.
Note: for safety reasons, the washing machine door remains locked when the water level and/
or temperature is high, or during spinning.
To continue the programme, press th e $Start/Reload button.
ʑEnergy saving m ode
If the washing machine is switch ed on and is not operated for several mi nutes before the programme starts or at t he
end of the programme, the d isplay panel light goes out an d the $Start/Reload button flashes.
Press any button to turn the l ight back on.
Programme selector for switching the
machine on and off and for selecting
the programme. Can be turned in
either direction.
All buttons are sensitive and need only
to be touched lightly. If you press and
hold the (Finished in) option butto n,
the appliance automatically runs
through the settings options.
3
Programmes
Detailed overview of programmes apage 7.
Temperature and spin speed can be selected individually,
depending on the selected programme and programme progress.
Cottons LFHard-wearing fabrics
+ Prewash 7Hard-wearing fabrics, pr ewash at 30 °C
Easy-Care IEasy-care fabrics
+ Prewash 7Easy-care fabrics, prewa sh at 30 °C
Mixed Load /Different types of la undry
Delicate/Silk Delicate washable fabrics
Wool :Hand/machine-washable wool
Rinse Extra rinse with spin
Spin Extra spin with select able spin speed
Drain >the rinsing water when c(Rinse hold = no final spin)
Gentle Spin Extra spin with reduced spin speed
SuperQuick 15' 6Super Quick programme
Sensitive Hard-wearing fabrics, longer wash ing and
additional rinsing for particularly sen sitive skin
Sportswear $Fabrics made from microfi bre
Dark Wash KDark-coloured fabrics
Switch off
Turn the programme selector to Off.
Turn off the tap
Not required for AquaStop models
aRefer to Installation instructi ons.
Remove the laundry
Open the washing machine door and remove the laundry.
If (Rinse hold = no fina l spin) is active: turn the programme selector
to Drain >or Spin . Select the spin speed if necessar y.
Press $Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave t he washing machine door an d detergent drawer open
so that any residual water can dry a way.
Congratulations - you have chosen a modern, high-quality domestic appliance
manufactured by Bosch. This washing mac hine is distinguished by its economical water
and energy consumption.
Each machine that leaves our factory has been inspected thoroughl y to ensure that it
functions properly and is in perfect condition.
For more information on our products, accessories, replacement parts and services, visit
our website www.bosch-home.com or contact one of our af ter-sales service centres.
Observe the safety instructions on page 8.
Do not operate this washing machine un til you have read these
instructions and the separate installatio ni nstructions.
7
Overview of programmes aCheck the consumption values table on page 8 and the instructions o npa ge9 .
* reduced load for additional ĉSpeed Per fect function.
As a short programme, Mixed Load /ø40 °C is ideal, when maximum spin speed is selected.
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the deter gentb etween compartments Iand II.
Programmes °C max. Typeo f laundry Additional functions; options; information
Cottons LF7- 90 °C
8 kg/ 5 kg*
Hard-wearing fabrics, heat-resistant f abrics made of cotton or linen ĉSpeed Perfect*,ĈEco Perfect, SReduced Ironi ng,
=Aqua Plus,c(Rinse hold)
+ Prewash 7Sensitive 7- 60 °C Hard-wearing fabrics made of cotton or line n ĉSpeed Perfe ct*,ĈEco Perfect, SReduced Ironing,
=Aqua Plus,c(Rinse hold); for particularly s ensitive skin, longer wash
cycle at selected temperature, higher wa ter level, additional rinse cycle
Easy-Care I7- 60 °C
3.5 kg
Easy-care fabrics made of cotton, li nen, syn- thetic fibres or blended fabrics ĉSpeed Perfect, ĈEco Perfect, SRe ducedIro ning,=Aqua Plus,
c(Rinse hold)
+ Prewash 7Mixed Load /7- 40 °C Fabrics made of cott on or easy-care fabrics ĉSpeed Perfect, ĈEco Perfect, SRe ducedIro ning,=Aqua Plus,
c(Rinse hold); di fferent types of laundry can be washed together
Dark Wash K7- 40 °C Dark-coloured fabrics made of cotton and da rk
easy-care fabrics ĉSpeed Perfect, ĈE co Perfect, SReduced Ironing,=Aqua Plus,
c(Rinse hold); re duced rinse and final spin
Delicate/Silk 7- 40 °C
2 kg
For delicate, washable fabrics, e.g. made of s ilk, satin, synthetic fibres or bl ended fabrics (e.g. curtains) ĉSpeed Perfect, ĈEco Per fect,SReduc edI roning,=Aqua Plus,
c(Rinse hold); n o spin between the rinse cycles
Wool :7- 40 °C Hand or machine-washable fabrics made of
wool or containing wool c(Rinse hold); Particularly gentle wash progra mme to prevent shrinkage of
laundry. Longer programme pauses (fa brics rest in the detergent solution)
SuperQuick 15' 67- 40 °C Easy-care fabrics made of cotton , linen, syn-
thetic fibres or blended fabrics c(Rinse hold); Short programme, approx. 15 minut es, suitable for lightly
soiled laundry
Sportswear $7- 40 °C Fabrics made from microf ibre ĉSpeed Perfect, ĈEco Perfect, SR educedI roning,=Aqua Plus,
c(Rinse hold); Do n ot treat laundry with fabric softener
Additional programmes Rinse , Spin , Drain >, Gentle Spin 
0611 / 9000608239 *608239* WAS28461GB,
WAS32461GB
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschla nd

8
Safety instructions
– Read the Instr uction Manual and Installation Instructions and all other information enclosed with the wa shing
machine and use the machine according ly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull o n the cable to disconnect the mains plug.
– Only insert /pull out the mains plug with dry hands.
Danger to life For worn-out appliances:
– Disconnect t he mains plug.
– Cut throu gh the mains cable and remove complete with plug .
– Destroy the lock on the washing machine door. This will p revent children from
locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging pa rts out of the reach of children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion – Itemsof laund rypr etreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may cause an explosion after being loade d into the
washing machine.
Rinse items of laundry thoroughly by hand befor ehand.
Risk of injury – Thew ashing machine door can become very hot.
– Be ca reful when draining hot detergent solution.
– Do not c limb onto the washing machine.
– Do no tle an on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values depending on model
Programme Load Power *** Water*** Programme
duration***
Cottons LF30 °C* 8 kg 0.35 kWh 76l 2:20h
Cottons LF40 °C* 8 kg 0.97 kWh 76l 2:30h
Cottons LF60 °C* 8 kg 1.36 kWh 76l 2:40h
Cottons LF90 °C 8 kg 2.3 4 kWh 87 l 2:30 h
Easy-Care I40 °C* 3.5 kg 0.55 kWh 55l 1:43h
Mixed Load /40 °C* 3.5 kg 0.47 kWh 49 l 1:01 h
Delicate/Silk 30 °C 2kg 0.14 kWh 35 l 0:41 h
Wool :30 °C 2kg 0.16 kWh 40 l 0:40 h
* P rogrammes etting for testing in accordance with applicable standard EN60456.
Note on comparative tests: When using the test programmes, wash the sp ecified load using the maximum spin speed.
Programme Additional function Load Annual en ergy
consumption
Annual water
consumption
Cottons LF40/60 °C ĈEco Perfect** 8/4 kg 189k Wh 10500l
** Programme setting for testing and energy labelling in accordan cew ithE U directive 2010/30/EU with cold water (15 °C).
*** The values deviate from the indicated values dependi ng on water pressure, hardness, and inlet temperature, ambient
temperature, type, amount and soiling of th e laundry, detergent used, fluctuations in the power supply and selected
additional functions.
9
Important information
Before washing for the fi rst time
Do not put any laundry in th e machine. Turn the tap on. Pour the following into compartment II:
–approx. 1 litre water
– detergent (amo unt to be used according to the manufacturer's instructions for light soiling and
according to water hardness)
Turn the programme selector to Easy-Care I60 °C and press $Start/Reload.
At the end of the programme, tur nth e programme selector to Off.
Protecting the laundr y and the machine
– When meas uring detergent, care products and cleaning agents, follow the manufacturer's instruction s.
– Empty pockets.
– Look o ut for metal items (paperclips, etc.).
– Wash de licates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand ou t ofp ockets and collars.
– Remove curta in fittings or place in the laundry bag.
Loading laundr y
Insert items of laundry of varying sizes.
Take care not to trap items of laundry between the washing mac hine door and the rubber seal.
Laundry with varyi ng degrees of soiling
Wash new items of clothing separately.
light No prewash. If required, selec t the additional ĉSpeed Perf ect function.
Pretreat any stains as necessary.
heavy Do not loa d as much laundry. Select the programme with Prewas h.
Soaking Load laundry o f the same colour.
Pour soaking agent/detergent into compartment II in accordance with the manufactur er's instructions.
Set the programme selector to Cottons LF30 °C and selec t $Start/Reload.
After approx. 10 minutes, p ress $Start/Reload to stop the programme. After the required soaking time,
press $Start/Reload again to continue the pro gramme, or change the programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour starch into the ~fabric softener compa rt-
ment in accordance with the manufa cturer's instructions (rinse first if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities. Sa lt may damage stainless steel. Always follow the dye
manufacturer's instructions. Do not use the washing machine for bleaching clothes.
10
Insert for liquid detergent depending on model
Position the insert for dispensi ngli quid detergent:
–Remove the detergent drawer completely apa ge 10.
– Slide th e insert forwards.
Do not use the insert (slide u pwards):
– For gel-ty pe detergents and washing powder,
–for programmes with + Prewash 7or (Finished in) option
Care
ʑMachine housing, co ntrol panel
– Remove d etergent residue immediately.
– Wipe with a soft, damp cloth.
– Do not clea n with a jet of water.
Cleaning the deterg ent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and dry it.
4. Fit the insert and lock it i n place (push the cylinder onto the guide pin).
5. Push in the detergent dra wer.
Leave the detergent drawer open so that any residual water can evap orate.
ʑDrum
Leave the washing machine door o pen so that the drum can dry out.
Use chlorine-free cleaning agent, not steel wool.
ʑDescaling Ensure there i sn o laundry in the machine
This should not be necess ary if the correct detergent dosage has been used. If it is necessary, however, pr oceed
according to the descaling agent manufacturer's ins tructions. Suitable descalers can be obtained via our website or
from our after-sales service (apage 13).
Instructions in the display panel depending on model
,flashing Close the washing machine doo r properly; laundry may be caught.
§:³Å,ÉOpen the tap completely, supply hose kinked or trapped; Clean the filter apage 11,
water pressure too low.
§:³µDetergent solution pump blocked; Clean the detergent solution pump apage 11.
Drain hose/waste pipe blocked; Clean the drain hose on the siphon apage 11.
§:´Water in the base tub, appliance leaking. Call t he after-sales service.
Other displays Switch off the appliance, wait for 5 seconds and switch it back on. If the display appears ag ain,
call the after-sales service apage 13.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No solvents.
11
Information about blockages
Detergent solution p ump
Turn the programme selector to Off and disconnect t he mains plug.
1. Open and remove the service fla p.
2. Take the drain hose out of th e retainer.
Remove the sealing cap, allow th e detergent solution to flow out.
Push the sealing cap back on.
3. Unscrew the pump cover carefully (residual water).
4. Clean the interior, pump cover thread and pump h ousing (the impeller in the detergent
solution pump must be a ble to rotate).
5. Replace the pump cover and screw it on tightly. The handle points upright. Rep lace the
drain hose in the holder.
6. Refit the service flap and close it.
To prevent unused detergent from flowi ng straight into the drain during the next wash:
Pour 1 litre of water into compartment II and start the Drain >pro gramme.
Drain hose on the siph on
Turn the programme selector to Off an d disconnect the mains plug.
1. Loosen the hose clamp, remo ve the drain hose carefully (residual water).
2. Clean the drainage hose and siphon conn ecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water su pply
Risk of electric shock
Do not immerse the AquaStop safety dev ice in water (contains electric valve).
Reduce the water pressure in the sup ply hose:
1. Turn off the tap.
2. Select any programme (except Spin / Drain >).
3. Press $Start/Reload. Let the programme r un for approximately 40 seconds.
4. Turn the programme selector to Off.Disconnect the ma ins plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter with a small bru sh.
and/or on standard and Aquasecure models:
Remove the hose from the back of the appliance,
remove the filter using pliers and clean the filter.
6. Connect the hose and chec k for leaks.
Risk of scalding.
– Allow the detergent solution t o cool down.
– Turn off the tap.
12
What to do if...
ʑWater is leaking out. – Attach/replace the drain hose correctly.
– Tighten the screw conn ection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
–$Start/Reload not pressed?
– Tap not tur ned on?
–Filter blocked? Clean the filter apage 11.
– Supply hose kinked or trapped?
ʑWashing machine door cannot
be opened.
–Safety function active. Programme stopped ? apage 4.
–(Rinse hold = no final spin) selected? apage 3, 4.
–Can be opened by emergency release only ? apage 13.
ʑProgramme does not start. –$Start/Reload pressed or (Finished in) time selected?
– Washing machine door closed?
–Childlock active? Deactivate apage 5.
ʑDetergent solution does not
drain.
–(Rinse hold = no final spin) selected? apage 3, 4.
–Clean the detergent solution pump apage 11.
– Clean the waste pipe and/or drainage hose.
ʑWater not visible in the drum. – Not a fault - water below the visible area.
ʑSpin result not satisfactory.
Laundry wet/too damp.
– Not a f ault - the imbalance monitoring system has interrupted th e spin because
the laundry is unevenly distributed .
Distribute large and small items of laun dry evenly in the drum.
–SReduced Ironing pressed? apage 5.
–Speed selected too low? apage 5.
ʑThe programme duration
changes during the washin g
cycle.
– Not a f ault - the programme sequence is optimised for the relevant w ashing pro-
cess. This can cause changes in th e programme duration in the display panel.
ʑRepeated spin start-up. – Not a fault - imba lance monitoring system is equalising the imbalance.
ʑResidual water in the ~com-
partment for care products.
– Not a f ault - the action of the care product is not affected.
–Clean the insert if necessary apage 10.
ʑOdour formation in the w ashing
machine.
–Run the Cottons LF9 0 °C programme with the washing machine em pty.
Use standard detergent.
ʑStatus indicator³þflashing.
Detergent may escape fro m the
detergent drawer.
–Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre water and pour the mixture into
compartment II.(Not for outdoor textiles o r those made with down.)
– Reduce the amount of detergent for the next wash cycle.
ʑPronounced generation o f
noise, vibration and
“wandering” during the spin
cycle.
–Are the appliance feet fixed?
Secure appliance feet aInstallati oni nstructions.
–Transportation safety devices removed?
Remove transportation safety devices aInstallation in structions.
ʑNoises during spinning and
draining.
–Clean the detergent solution pump a page 11.
ʑDisplay panel/indicator lamps
do not function during
operation.
– Power cut?
– Circuit breakers tripped? Switch circuit breakers ba ck on or replace.
– Energy saving mode active?
a page 5.
– If a fault occurs repeatedly, call th e after-sales service.
ʑProgramme sequence longer
than usual.
– Not a fa ult - imbalance monitoring system is equalising the imb alance by
repeatedly redistributing the laundry.
– Not a fault - fo am detection system active - adds an additional rinse cycle.
ʑThere are detergent residues on
the laundry.
– In isolated cases, phosphate-free detergents contain water-i nsoluble residues.
–Select Rinse or brush down the laundry after washing.
13
What to do if...
ʑIn Add laundry mode,
$Start/Reload flashes very
quickly and a signal sounds.
– W ater level too high. Not possible to add more laun dry. Close the washing
machine door immediately if necessary.
–Press $Start/Reload to continue the p rogramme.
If you cannot correct a fault yourself (switching o n/off) or a repair is required:
–Turn the programme selector to Off and p ull the mains plug out of the socket.
–Turn off the tap and call the a fter-sales service apage 13.
Emergency release e.g. in the event of a powe r cut
The programme continues when the power supply is restored. However, if the laundry has to be removed,
the washing machine door can be opene d as follows:
Risk of scalding
The detergent solution and laundry m ay be hot. If possible, leave to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door i f water can be seen through the glass.
1. Turn the programme selector to Off and pull o ut the mains plug.
2. Drain the detergent solution apage 11.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
After-sales service
ʑIf you cannot remedy the fault yourself (What to do if ..., apage 12, 13), contact our after-sales servic e.
We will always find a suitable solution to avoid unnecessary visits by repair personnel.
ʑYou can find the contact details for your nearest after-sales service here or in th e after-sales service directory
(depending on the model).
–GB 0844 8928979 (Callsfrom a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply).
–IE 01450 2655
ʑPlease give the after-sales service the product number (E-Nr.) and the production number (FD) of the appliance.
Product number Production number
This information can be found:
on the inside of the washing machin e door* /
open service flap* and on the rear of the appliance.
*depending on the model
ʑTrust the manufacturer's technical expertise. Turn to us.
By doing so, you will ensure that th e repair is carried out by trained service technicians equipped with original
spare parts
Washing machin e
en Instruction man ual

1 2
]7- 90 °C V(Temperature) Select the temperature (7
1 - 24h (Finished in) Programme end after
cc- 1400* c(rpm) Select the spin speed (* m = no final spin, laundry rem ---appears in the display
Status indicators Programme status indicat
1üü2üü cü-¯- Wash, rinse, spin, program ¯(Childlock apage 5
,Open the washing machin aProgramme
Display panel /
Options buttons
Additional
functions
aa
C
T
ʑʑ$
Insert for liquid detergent (depending on model), page 10
Compartment II:detergent for main wash,
Water softener, bleach, stain remover
Your washing machine Intended use
Contents Page
ʔIntended use ..........................................................................................................................1
ʔProgrammes ..........................................................................................................................1
ʔSetting and adjusting the programme .............................................................................3
ʔWashing ..............................................................................................................................3/4
ʔAfter washing ........................................................................................................................ 4
ʔIndividual settings ............................................................................................................5/6
ʔOverview of programmes ...................................................................................................7
ʔSafety instructions ................................................................................................................ 8
ʔConsumption values ............................................................................................................8
ʔImportant information .........................................................................................................9
ʔInsert for liquid detergent .................................................................................................10
ʔCare .......................................................................................................................................10
ʔInformation on the display panel ....................................................................................10
ʔInstructions for blockages ................................................................................................11
ʔWhat to do if.................................................................................................................. 12/13
ʔEmergency release .............................................................................................................13
ʔAfter-sales service...............................................................................................................13
Environmental/savings tips
– Always fill the washing machine with a maximum amount of laundry for
the relevant programme.
– Wash normally soiled laundry without a prewash.
–Instead of Cottons LF90 °C,select the Cottons LF60 °C programme and
the additional ĈEco Perfect function.Comparable cleaning result with
significantly lower energy consumption.
– Measure the detergent according to the manufacturer's instructions and water
hardness.
– If you want to dry the laundry in the tumble dryer afterwards, select a spin speed
suggested by the dryer manufacturer.
Preparation a
Compartment ~:fabric softener, starch
Compartment I:detergent for prewash
ʔFor domestic use only
ʔFor washing machine-washable fabrics and hand-washable wool in
detergent solution
ʋTo be operated with cold drinking water and commercially available
detergents and care products which are suitable for use in washing
machines.
– Do not leave children unattended near the washing machine.
– The washing machine is not to be used by children or persons
not familiar with the operating instructions.
– Keep pets away from the washing machine. ~Correct installation according to the separate
Installation instructions.
Check the machine
– Never use a damaged machine.
– Inform the after-sales service.
Connect the mains plug
– Make sure your hands are dry.
– Take hold of the plug only.
Turn the tap on (aa$$¯a$>$$a$§,ǯ$ʑʑVʑ$ʑcʑaĉaĈS=ʑ($(((ʑ§o,$§,ǯ§,§,ǯ$ʑ$Programmes
Detailed overview of programmes apage 7.
Temperature and spin speed can be selected individually,
depending on the selected programme and programme progress.
Cottons LFHard-wearing fabrics
+ Prewash 7Hard-wearing fabrics, prewash at 30 °C
Easy-Care IEasy-care fabrics
+ Prewash 7Easy-care fabrics, prewash at 30 °C
Mixed Load /Different types of laundry
Delicate/Silk Delicate washable fabrics
Wool :Hand/machine-washable wool
Rinse Extra rinse with spin
Spin Extra spin with selectable spin speed
Drain >the rinsing water when c(Rinse hold = no final spin)
Gentle Spin Extra spin with reduced spin speed
SuperQuick 15' 6Super Quick programme
Sensitive Hard-wearing fabrics, longer washing and
additional rinsing for particularly sensitive skin
Sportswear $Fabrics made from microfibre
Dark Wash KDark-coloured fabrics
a>$
Congratulations - you have chosen a modern, high-quality domestic appliance
manufactured by Bosch. This washing machine is distinguished by its economical water
and energy consumption.
Each machine that leaves our factory has been inspected thoroughly to ensure that it
functions properly and is in perfect condition.
For more information on our products, accessories, replacement parts and services, visit
our website www.bosch-home.com or contact one of our after-sales service centres.
Observe the safety instructions on page 8.
Do not operate this washing machine until you have read these
instructions and the separate installation instructions.
aĉ/øLF7ĉĈS=c77ĉĈS=cI7ĉĈS=c7/7ĉĈS=cK7ĉĈS=c7ĉĈS=c:7c67c$7ĉĈS=c>

3 4
]7V(7= cold)
ccc(* model-dependent) or (Rinse hold
remains in the water after the final rinse, play panel).
icators:
1üü2üü cü¯ramme duration or end (-¯-)
(a,hine door, add laundry apage 4, 5
e selector Start/
Reload
Sort and load the laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, level of soiling and temperature.
Do not exceed the maximum load apage 7.
Observe the important information apage 9.
Insert items of laundry of varying sizes.
Close the washing machine door. Take care not to trap items of laundry between the washing
machine door and the rubber seal.
Add detergent and care product
Measure according to:
The amount of laundry, level of soiling, water hardness (ask your water supply company) and
manufacturer's instructions.
On models without an insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
During operation, open the detergent drawer with care.
ʑʑ$
ʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔLFLFĈBefore washing for the first time
Run a wash cycle without any laundry apage 9
Set** and adjust the programme 1
2
Washing
~ʔʔʋ
Dilute thick fabric softener and conditioner with water.
This prevents blockages.
Detergent drawer
with compartments I, II, ~Control panel
Washing machine
door handle
Service flap
Washing machine door
**If the (symbol is lit in the display
panel, the childlock is active
aDeactivate it, page 5.
Additional functions and options buttons
aIndividual settings, page 5
Press $Start/Reload
Washing
End of programme when ...
... the $Start/Reload button is off and -¯-appears in the
display panel.
If the display panel lighting is off, press any button
aEnergy-saving mode, page 5.
Cancel the programme
Programmes at high temperatures:
–To cool the laundry: Select Rinse .
–Press $Start/Reload.
Programmes at lower temperatures:
–Select Spin or Drain >.
–Press $Start/Reload.
Change the programme if...
... you have selected the wrong programme by mistake:
– Reselect the preogramme.
–Press $Start/Reload. The new programme starts from the
beginning.
Add laundry when ... apage 5
... $Start/Reload is pressed and in the display panel both §+,symbols are then lit.
If ǯis lit, the washing machine door cannot be opened.
Select the $Start/Reload button.
ʑʑVʑ$ʑcʑaĉaĈS=ʑ($(((ʑ§o,$§,ǯ§,§,ǯ$ʑ$Programme selector for switching the
machine on and off and for selecting
the programme. Can be turned in
either direction.
All buttons are sensitive and need only
to be touched lightly. If you press and
hold the (Finished in) option button,
the appliance automatically runs
through the settings options.
3
aLF7I7/:>c6$KSwitch off
Turn the programme selector to Off.
Turn off the tap
Not required for AquaStop models
aRefer to Installation instructions.
Remove the laundry
Open the washing machine door and remove the laundry.
If (Rinse hold = no final spin) is active: turn the programme selector
to Drain >or Spin . Select the spin speed if necessary.
Press $Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent drawer open
so that any residual water can dry away.
aĉ/øLF7ĉĈS=c77ĉĈS=cI7ĉĈS=c7/7ĉĈS=cK7ĉĈS=c7ĉĈS=c:7c67c$7ĉĈS=c>

5 6
]7V7ccc1üü2üü cü¯¯(a,aaaIndividual settings
ʑSignal
ʑ$Start/Reload
To start the programme or to subsequently load additional laundry, and to activate/deactivate the childlock.
1. Activate the
setting mode for
signal volume
Set to •1 step, the
display panel
lights up
Press and
hold +1 step,
release
Set to •
Button signals Information signals
Set the
volume*
1 step Set the
volume*
*you may need to select the function several times
2. Set the
volume for ...
skip
ʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔLFLFĈa~ʔʔʋ~(aa$$¯a$>$$a$§,ǯ$Individual settings
ʑOptions buttons
The spin speed and temperature can be changed before and during the selected programme. The effects depend on
the programme progress.
ʑV(Temperature °C)
You can change the displayed washing temperature. The maximum washing temperature that can be selected depends
on the programme that has been set.
ʑ(Finished in)
When you select the programme, the relevant programme duration is displayed. You can delay the start of the programme
before it begins. The "Finished in" time can be set in increments of one hour up to a maximum of 24 hours. Press the
(Finished in) button repeatedly until the desired number of hours is displayed (h = hour). Press $Start/Reload.
ʑ(Spin speed in rpm) / (Rinse hold = no final spin)
You can change the spin speed shown or select c(Rinse hold = no final spin, laundry remains in the water after the
final rinse, ---appears in the display panel). You can change the spin speed shown. The maximum selectable spin
speed depends on the model and on which programme is currently selected.
ʑAdditional functions aand overview of programmes, page 7
ĉSpeed Perfect For washing in a shorter time with a washing result comparable to that of the standard pro-
gramme. Maximum load aOverview of programmes, page 7.
ĈEco Perfect For saving energy with a washing result comparable to that of the standard programme.
SReduced Ironing
Special spin sequence with subsequent fluffing. Gentle final spin at reduced speed.
Residual moisture in the laundry is increased slightly.
=Aqua Plus Additional rinse cycle. Increased water level. For areas with very soft water or for further
improving the washing result.
ʑChildlock
(in the display panel
You can lock the washing machine to prevent the functions you have set from being changed
inadvertently.
ON/OFF: after the start/end of the programme, press and hold $Start/Reload for approx.
5 seconds.
Note: The childlock can remain activated until you wish to start the next programme, even after
switching off the machine.
Then you can deactivate the childlock before starting the programme and activate it again as
necessary once the programme has started.
Note:
–The (symbol is lit: Childlock active.
–The (symbol flashes: Childlock active and then the programme selector is altered.
To prevent the programme from stopping, turn the programme selector back to the original
programme, the (symbol is lit again.
ʑAdd laundry
§+o,in the display panel
If you want to add additional items of laundry after the programme has started, press the
$Start/Reload button. The machine checks whether adding laundry is possible.
§+,are lit: Adding laundry is possible.
ǯflashing: Wait until §+,are lit.
Note: Only open the washing machine door when both the §+,symbols are lit.
ǯ: It is not possible to add laundry.
Note: for safety reasons, the washing machine door remains locked when the water level and/
or temperature is high, or during spinning.
To continue the programme, press the $Start/Reload button.
ʑEnergy saving mode
If the washing machine is switched on and is not operated for several minutes before the programme starts or at the
end of the programme, the display panel light goes out and the $Start/Reload button flashes.
Press any button to turn the light back on.
aLF7I7/:>c6$Ka>$
aĉ/øLF7ĉĈS=c77ĉĈS=cI7ĉĈS=c7/7ĉĈS=cK7ĉĈS=c7ĉĈS=c:7c67c$7ĉĈS=c>

]7V7ccc1üü2üü cü¯¯(a,aaaʑʑ$
ʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔLFLFĈa~ʔʔʋ~(aa$$¯a$>$$a$§,ǯ$ʑʑVʑ$ʑcʑaĉaĈS=ʑ($(((ʑ§o,$§,ǯ§,§,ǯ$ʑ$aLF7I7/:>c6$Ka>$
7
Overview of programmes aCheck the consumption values table on page 8 and the instructions on page 9.
* reduced load for additional ĉSpeed Perfect function.
As a short programme, Mixed Load /ø40 °C is ideal, when maximum spin speed is selected.
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the detergent between compartments Iand II.
Programmes °C max. Type of laundry Additional functions; options; information
Cottons LF7- 90 °C
8 kg/ 5 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen ĉSpeed Perfect*,ĈEco Perfect, SReduced Ironing,
=Aqua Plus,c(Rinse hold)
+ Prewash 7Sensitive 7- 60 °C Hard-wearing fabrics made of cotton or linen ĉSpeed Perfect*,ĈEco Perfect, SReduced Ironing,
=Aqua Plus,c(Rinse hold); for particularly sensitive skin, longer wash
cycle at selected temperature, higher water level, additional rinse cycle
Easy-Care I7- 60 °C
3.5 kg
Easy-care fabrics made of cotton, linen, syn- thetic fibres or blended fabrics ĉSpeed Perfect, ĈEco Perfect, SReduced Ironing,=Aqua Plus,
c(Rinse hold)
+ Prewash 7Mixed Load /7- 40 °C Fabrics made of cotton or easy-care fabrics ĉSpeed Perfect, ĈEco Perfect, SReduced Ironing,=Aqua Plus,
c(Rinse hold); different types of laundry can be washed together
Dark Wash K7- 40 °C Dark-coloured fabrics made of cotton and dark
easy-care fabrics ĉSpeed Perfect, ĈEco Perfect, SReduced Ironing,=Aqua Plus,
c(Rinse hold); reduced rinse and final spin
Delicate/Silk 7- 40 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains) ĉSpeed Perfect, ĈEco Perfect, SReduced Ironing,=Aqua Plus,
c(Rinse hold); no spin between the rinse cycles
Wool :7- 40 °C Hand or machine-washable fabrics made of
wool or containing wool c(Rinse hold); Particularly gentle wash programme to prevent shrinkage of
laundry. Longer programme pauses (fabrics rest in the detergent solution)
SuperQuick 15' 67- 40 °C Easy-care fabrics made of cotton, linen, syn-
thetic fibres or blended fabrics c(Rinse hold); Short programme, approx. 15 minutes, suitable for lightly
soiled laundry
Sportswear $7- 40 °C Fabrics made from microfibre ĉSpeed Perfect, ĈEco Perfect, SReduced Ironing,=Aqua Plus,
c(Rinse hold); Do not treat laundry with fabric softener
Additional programmes Rinse , Spin , Drain >, Gentle Spin 
0611 / 9000608239 *608239* WAS28461GB,
WAS32461GB
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland

8
Safety instructions
– Read the Instruction Manual and Installation Instructions and all other information enclosed with the washing
machine and use the machine accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull on the cable to disconnect the mains plug.
– Only insert/pull out the mains plug with dry hands.
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Cut through the mains cable and remove complete with plug.
– Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may cause an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values depending on model
Programme Load Power *** Water*** Programme
duration***
Cottons LF30 °C* 8 kg 0.35 kWh 76 l 2:20 h
Cottons LF40 °C* 8 kg 0.97 kWh 76 l 2:30 h
Cottons LF60 °C* 8 kg 1.36 kWh 76 l 2:40 h
Cottons LF90 °C 8 kg 2.34 kWh 87 l 2:30 h
Easy-Care I40 °C* 3.5 kg 0.55 kWh 55 l 1:43 h
Mixed Load /40 °C* 3.5 kg 0.47 kWh 49 l 1:01 h
Delicate/Silk 30 °C 2 kg 0.14 kWh 35 l 0:41 h
Wool :30 °C 2 kg 0.16 kWh 40 l 0:40 h
* Programme setting for testing in accordance with applicable standard EN60456.
Note on comparative tests: When using the test programmes, wash the specified load using the maximum spin speed.
Programme Additional function Load Annual energy
consumption
Annual water
consumption
Cottons LF40/60 °C ĈEco Perfect** 8/4 kg 189 kWh 10500 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 °C).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient
temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected
additional functions.
9
Important information
Before washing for the first time
Do not put any laundry in the machine. Turn the tap on. Pour the following into compartment II:
–approx. 1 litre water
– detergent (amount to be used according to the manufacturer's instructions for light soiling and
according to water hardness)
Turn the programme selector to Easy-Care I60 °C and press $Start/Reload.
At the end of the programme, turn the programme selector to Off.
Protecting the laundry and the machine
– When measuring detergent, care products and cleaning agents, follow the manufacturer's instructions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Loading laundry
Insert items of laundry of varying sizes.
Take care not to trap items of laundry between the washing machine door and the rubber seal.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light No prewash. If required, select the additional ĉSpeed Perfect function.
Pretreat any stains as necessary.
heavy Do not load as much laundry. Select the programme with Prewash.
Soaking Load laundry of the same colour.
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions.
Set the programme selector to Cottons LF30 °C and select $Start/Reload.
After approx. 10 minutes, press $Start/Reload to stop the programme. After the required soaking time,
press $Start/Reload again to continue the programme, or change the programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour starch into the ~fabric softener compart-
ment in accordance with the manufacturer's instructions (rinse first if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye
manufacturer's instructions. Do not use the washing machine for bleaching clothes.
a7ʑʑʑa,§³ÅÉa§³µaa§´a
>>$ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑ~aʑLFʑ³þʑaaʑ
a
ʑ
a
ʑʑʑ$$aaʑaʑʑʑ

LFLFLFLFI/:LFĈI$ĉLF$$$~
10
Insert for liquid detergent depending on model
Position the insert for dispensing liquid detergent:
–Remove the detergent drawer completely apage 10.
– Slide the insert forwards.
Do not use the insert (slide upwards):
– For gel-type detergents and washing powder,
–for programmes with + Prewash 7or (Finished in) option
Care
ʑMachine housing, control panel
– Remove detergent residue immediately.
– Wipe with a soft, damp cloth.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and dry it.
4. Fit the insert and lock it in place (push the cylinder onto the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
ʑDrum
Leave the washing machine door open so that the drum can dry out.
Use chlorine-free cleaning agent, not steel wool.
ʑDescaling Ensure there is no laundry in the machine
This should not be necessary if the correct detergent dosage has been used. If it is necessary, however, proceed
according to the descaling agent manufacturer's instructions. Suitable descalers can be obtained via our website or
from our after-sales service (apage 13).
Instructions in the display panel depending on model
,flashing Close the washing machine door properly; laundry may be caught.
§:³Å,ÉOpen the tap completely, supply hose kinked or trapped; Clean the filter apage 11,
water pressure too low.
§:³µDetergent solution pump blocked; Clean the detergent solution pump apage 11.
Drain hose/waste pipe blocked; Clean the drain hose on the siphon apage 11.
§:´Water in the base tub, appliance leaking. Call the after-sales service.
Other displays Switch off the appliance, wait for 5 seconds and switch it back on. If the display appears again,
call the after-sales service apage 13.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No solvents.
11
Information about blockages
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. Take the drain hose out of the retainer.
Remove the sealing cap, allow the detergent solution to flow out.
Push the sealing cap back on.
3. Unscrew the pump cover carefully (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must be able to rotate).
5. Replace the pump cover and screw it on tightly. The handle points upright. Replace the
drain hose in the holder.
6. Refit the service flap and close it.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 1 litre of water into compartment II and start the Drain >programme.
Drain hose on the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, remove the drain hose carefully (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock
Do not immerse the AquaStop safety device in water (contains electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Spin / Drain >).
3. Press $Start/Reload. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off.Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or on standard and Aquasecure models:
Remove the hose from the back of the appliance,
remove the filter using pliers and clean the filter.
6. Connect the hose and check for leaks.
Risk of scalding.
– Allow the detergent solution to cool down.
– Turn off the tap.
ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑ~aʑLFʑ³þʑaaʑ
a
ʑ
a
ʑʑ
ʑ$$aaʑaʑʑʑ

LFLFLFLFI/:LFĈI$ĉLF$$$~a7ʑʑʑa,§³ÅÉa§³µaa§´a>>$
12
What to do if...
ʑWater is leaking out. – Attach/replace the drain hose correctly.
– Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
–$Start/Reload not pressed?
– Tap not turned on?
–Filter blocked? Clean the filter apage 11.
– Supply hose kinked or trapped?
ʑWashing machine door cannot
be opened.
–Safety function active. Programme stopped? apage 4.
–(Rinse hold = no final spin) selected? apage 3, 4.
–Can be opened by emergency release only? apage 13.
ʑProgramme does not start. –$Start/Reload pressed or (Finished in) time selected?
– Washing machine door closed?
–Childlock active? Deactivate apage 5.
ʑDetergent solution does not
drain.
–(Rinse hold = no final spin) selected? apage 3, 4.
–Clean the detergent solution pump apage 11.
– Clean the waste pipe and/or drainage hose.
ʑWater not visible in the drum. – Not a fault - water below the visible area.
ʑSpin result not satisfactory.
Laundry wet/too damp.
– Not a fault - the imbalance monitoring system has interrupted the spin because
the laundry is unevenly distributed.
Distribute large and small items of laundry evenly in the drum.
–SReduced Ironing pressed? apage 5.
–Speed selected too low? apage 5.
ʑThe programme duration
changes during the washing
cycle.
– Not a fault - the programme sequence is optimised for the relevant washing pro-
cess. This can cause changes in the programme duration in the display panel.
ʑRepeated spin start-up. – Not a fault - imbalance monitoring system is equalising the imbalance.
ʑResidual water in the ~com-
partment for care products.
– Not a fault - the action of the care product is not affected.
–Clean the insert if necessary apage 10.
ʑOdour formation in the washing
machine.
–Run the Cottons LF90 °C programme with the washing machine empty.
Use standard detergent.
ʑStatus indicator³þflashing.
Detergent may escape from the
detergent drawer.
–Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre water and pour the mixture into
compartment II.(Not for outdoor textiles or those made with down.)
– Reduce the amount of detergent for the next wash cycle.
ʑPronounced generation of
noise, vibration and
“wandering” during the spin
cycle.
–Are the appliance feet fixed?
Secure appliance feet aInstallation instructions.
–Transportation safety devices removed?
Remove transportation safety devices aInstallation instructions.
ʑNoises during spinning and
draining.
–Clean the detergent solution pump a page 11.
ʑDisplay panel/indicator lamps
do not function during
operation.
– Power cut?
– Circuit breakers tripped? Switch circuit breakers back on or replace.
– Energy saving mode active?
a page 5.
– If a fault occurs repeatedly, call the after-sales service.
ʑProgramme sequence longer
than usual.
– Not a fault - imbalance monitoring system is equalising the imbalance by
repeatedly redistributing the laundry.
– Not a fault - foam detection system active - adds an additional rinse cycle.
ʑThere are detergent residues on
the laundry.
– In isolated cases, phosphate-free detergents contain water-insoluble residues.
–Select Rinse or brush down the laundry after washing.
13
What to do if...
ʑIn Add laundry mode,
$Start/Reload flashes very
quickly and a signal sounds.
– Water level too high. Not possible to add more laundry. Close the washing
machine door immediately if necessary.
–Press $Start/Reload to continue the programme.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
–Turn the programme selector to Off and pull the mains plug out of the socket.
–Turn off the tap and call the after-sales service apage 13.
Emergency release e.g. in the event of a power cut
The programme continues when the power supply is restored. However, if the laundry has to be removed,
the washing machine door can be opened as follows:
Risk of scalding
The detergent solution and laundry may be hot. If possible, leave to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and pull out the mains plug.
2. Drain the detergent solution apage 11.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
After-sales service
ʑIf you cannot remedy the fault yourself (What to do if ..., apage 12, 13), contact our after-sales service.
We will always find a suitable solution to avoid unnecessary visits by repair personnel.
ʑYou can find the contact details for your nearest after-sales service here or in the after-sales service directory
(depending on the model).
–GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply).
–IE 01450 2655
ʑPlease give the after-sales service the product number (E-Nr.) and the production number (FD) of the appliance.
Product number Production number
This information can be found:
on the inside of the washing machine door* /
open service flap* and on the rear of the appliance.
*depending on the model
ʑTrust the manufacturer's technical expertise. Turn to us.
By doing so, you will ensure that the repair is carried out by trained service technicians equipped with original
spare parts

LFLFLFLFI/:LFĈI$ĉLF$$$~a7ʑʑʑa,§³ÅÉa§³µaa§´a>>$ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑ~aʑLFʑ³þʑaaʑ
a
ʑ
a
ʑʑʑ$$aaʑaʑʑʑ
Washing machine
en Instruction manual