Bosch WAS32794ME User manual

1 2 3 4 5 6
Switching off
Turn the programme selector to off.
Turning the tap off
Not required for Aqua-Stop models –> Installation
instructions, page 7.
Removing washing
Open the washing machine door and remove the
washing.
If Rinse stop (no final spin) is active: turn the
programme selector to >Empty or cSpin. Select the
spin speed if necessary.
Press $Start/Reload.
– Remove any foreign objects -
risk of rusting.
– Leave the washing machine door and
detergent drawer open so that any residual
water can evaporate.
Programme has ended when...
... finished, Remove washing appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: select cRinse.
– Press $Start/Reload.
Programmes at low temperatures:
– Select cSpin or >Empty.
– Press $Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press $Start/Reload). The new programme starts
from the beginning.
Reloading laundry, if ... –> page 6
...$Start/Reload is selected and Top-up possible
appears in the display panel.
– Do not leave the washing machine door open
for too long as water from the washing could
leak out.
– Load indicator not active when reloading.
Press $Start/Reload.
Sorting the laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load –> page 7.
Observe the important information –> page 9.
Detergents and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
During operation: open the detergent drawer carefully.
Programmes
Detailed overview of programmes –> page 7.
Temperature and spin speed can be selected individually,
depending on the selected programme and programme
progress.
Cottons LFHard-wearing fabrics
Easy-care IEasy-care fabrics
Mix MFDifferent types of laundry
Delicate/Silk Delicate washable fabrics
øWool /Hand/machine-washable wool
Rinse Extra rinse with spin
Spin Extra spin with selectable spin speed
Empty >Empty the rinsing water with
Rinse stop (no final spin)
SuperQuick 15’ 6Extra short programme
Sensitive Hard-wearing fabrics; longer washing
and additional rinsing for particularly
sensitive skin
Sports, Fitness $Fabrics made from microfibre
Shirt/Blouse GNon-iron shirts
CurtainsPCurtains programme
Down Wwashable fabrics filled with down
Dark Wash Dark-coloured fabrics
––, 20° - 90° °CÔÈSet the temperature (– – = cold)
0,400 - 1600* ÔÈSet the spin speed
(* model-dependent) (0=no spin dur-
ing the programme sequence)
Programme selectorDisplay panel/
menu buttons/change buttons
Start/
Reload
Individual settings
Stain selection
The correct treatment for every stain
Do not let stains dry. Remove any solid residue beforehand. Sort items of laundry as usual
and load the washing machine. Select a type of stain (cannot be combined).
ʑA total of 16 different stains can be selected. The washing machine adjusts the washing
temperature, drum movement and soaking time to suit the type of stain. Hot or cold water,
gentle or intensive washing control (thanks to the new drum structure) and a long or short
soaking time ensure that the wash programme has a special sequence for each type of
stain.
ʑA stain type can be added to each programme via the menu buttons/change buttons.
ʑThe result: optimum stain treatment without the use of additional special detergents.
ʑStains
Baby food
Blood
Egg
Soil and sand
Grass
Coffee
Cosmetics
Red wine stain
Chocolate
Sweat
Bottom sock dirt
Butter and edible oil
Tea
Tomato
Strawberry
Orange
ʑStain treatment in detail - 2 examples
Egg Soaked in lukewarm water, selected wash cycle with a higher
water level and additional rinse cycles to remove particles
Blood Blood is first "loosened" in cold water, then the selected wash
programme starts.
For the other types of stain, we have formulated comparable solutions in our intensive
studies.
Reload
If you want to add additional items of laundry after the programme has started, choose
$Start/Reload.The machine checks whether reloading is possible. Follow the instructions
in the display panel.
For safety reasons, the washing machine door remains locked when the water level and/or
temperature is high, or while the drum is rotating.
To continue the programme, press the $Start/Reload button.
Insert for liquid detergent (depending on model), –> page 10
Compartment II: detergent for main wash,
softener, bleach, stain remover
Your washing machine
Congratulations äyou have opted for a modern, high-quality
domestic appliance manufactured by Bosch. This washing machine
is distinguished by its economical water and energy consumption.
Each machine that leaves our factory is inspected thoroughly to
ensure that it functions properly and is in perfect condition.
Further information: http://www.bosch-hausgeraete.de
Bosch-Infoteam: [e-mail]
Intended use
Contents Page
ʋIntended use ......................................................................................1
ʋProgrammes .......................................................................................1
ʋSetting and adjusting the programme ..........................................3
ʋWashing ..........................................................................................3/4
ʋAfter washing .....................................................................................4
ʋIndividual settings ..........................................................................5/6
ʋOverview of programmes ................................................................7
ʋSafety instructions ............................................................................. 8
ʋConsumption values ......................................................................... 8
ʋImportant information ...................................................................... 9
ʋInsert for liquid detergent.............................................................. 10
ʋCare ...................................................................................................10
ʋInformation on the display panel ..................................................10
ʋInformation about blockages ........................................................11
ʋWhat to do if............................................................................... 12/13
ʋEmergency release .........................................................................13
ʋAfter-sales service ...........................................................................13
Environmental protection/Conservation tips
– Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
– Wash normally soiled laundry without a prewash.
– Instead of the LFCottons 90 °C programme, select the
LFCottons 60 °C and the jEcoPerfect option. Comparable
cleaning result with significantly lower energy consumption.
– Measure the detergent according to the manufacturer's
instructions and water hardness.
– If the laundry is then dried in the tumble dryer, select the
appropriate spin speed according to the instructions of the dryer
manufacturer.
Automatic stain removal
Automatic treatment of 16 different types of stain possible. No
pretreatment of stains required - the washing machine automatically
adapts the washing process –> page 6.
Preparation Before washing for the first time
Wash once without any laundry –> page 9.
Open the door/set the programme 1
2
Washing
Compartment ~: fabric softener, starch
Compartment I: Detergent for prewash
ʋFor domestic use only
ʋFor machine-washable fabrics and hand-washable wool
in detergent solution
ʋTo be operated with cold drinking water and commer-
cially available detergents and care products which are
suitable for use in washing machines
– Do not leave children unattended near the washing machine.
– The washing machine is not to be used by children or persons
not familiar with the operating instructions.
– Keep pets away from the washing machine.
Detergent drawer
with compartments I, II, ~Controlpanel
Washing machine door
handle
Serviceflap
Washingmachinedoor
Correct installation according to the
separate Installation instructions.
Check the machine
– Never use a damaged machine.
– Inform the after-sales service.
Connecting the mains
plug
Make sure your hands are dry.
Take hold of the plug only.
Turn the tap on
**If the childlock is active –> deactivate it, page 5.
Follow the instructions in the display panel.
Washing
Individual settings
ʑOptions see also the Overview of programmes
VarioPerfect*
iSpeedPerfect - Standard -
jEcoPerfect
SpeedPerfect: For washing in a shorter time with a washing
outcome comparable to that of the standard programme.
Maximum load –> Overview of programmes, page 7.
EcoPerfect: For saving energy with a washing performance
comparable to that of the standard programme.
End time*When you select the programme, the respective time to the
end of the programme is displayed. It can be adjusted to a
maximum of 24 hours in 1-hour increments. Press the
$/#change buttons repeatedly until the desired number of
hours is displayed (h=hour). It is not possible to make
adjustments once the programme has started.
cPrewash
OFF - ON
For heavily soiled items. Prewash at max. 30 °C
SEasy-iron
OFF - ON
Special spin sequence with subsequent fluffing. Gentle final
spin at reduced speed. Residual moisture in the laundry is
increased slightly.
3Signal*Select the volume of the information signals.
OFF äquiet ämedium äloud ävery loud
Button signal*Select the volume of the button signals.
OFF äquiet ämedium äloud ävery loud
Language*Select the language of the display texts.
=Water Plus
OFF - ON
Increased water level. Gentler treatment of the laundry.
cRinse stop
OFF - ON
After the final rinse, the laundry remains in the water.
2Rinse Plus*
max. +3 Rinse cycles
Extra rinsing. Prolonged programme duration.
Recommended use: for particularly sensitive skin and/or in
areas with very soft water.
[Stain selection*Automatic treatment of stubborn stains -> page 6.
ʑDisplay symbols
#Childproof lock/appliance
lock
OFF - ON
You can lock the washing machine to prevent the functions
you have set from being changed inadvertently.
To activate/deactivate: press and hold the %menu button for
5 seconds.
Note: the childproof lock remains activated until you start the
next programme, even after the machine has been switched
off.
Deactivate the childproof lock again when you have switched
on the machine.
3Foam detection Too much foam in the washing machine. Foam detection
system active - special programme sequence to reduce foam.
%/&To select menu options
Information on programme
sequence; with progress or
load bar, as appropriate
$/#To change settings
available depending on the
selected
*If the buttons are held for longer,
the appliance automatically scrolls
through the subsequent setting
options
6
Load indicator/rec-
ommended dosage To activate, first open the door, set the programme
and then load the items of laundry.
Loading the laundry
Observe the load indicator in
the display –> page 9
4
Close the
washing
machine door
Make individual settings
–> page 5.
Stain selection –> page 6.
Select the temperature/
spin speed –> page 2.
5
Select $Start/Reload
All buttons are sensitive and
need only to be touched lightly.
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
Dilute thick fabric softener and care products with water.
This prevents blockages.
3
Adding detergent and
care products
Observe the dosage
recommendation for detergent
in the display –> page 9
7
Overview of programmes –> table of consumption values on page 8 and instructions on page 9.
* reduced load for iSpeedPerfect option
Mix 40 °C with maximum spin speed is ideal as a short programme.
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the detergent between compartments Iand II.
Programmes °C max. Type of laundry Options; notes
Cottons LF– – ... 90°C
8 kg/
5 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cot- ton or linen
SpeedPerfect*,EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus, Stains,Rinse stop
Sensitive – – ... 60 °C Hard-wearing fabrics made of cotton or linen
SpeedPerfect*, EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains, Rinse stop;for particularly sensitive skin, longer wash cycle at selected temperature, higher water level, additional rinse cycle
Easy-care I– – ... 60 °C
3.5 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics
SpeedPerfect,EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop
Mix MF– – ... 40 °C Fabrics made of cotton and easy-care fabrics SpeedPerfect,EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop; different types of laundry can be washed together
DarkWash – – ... 40 °C Dark-coloured fabrics made of cotton and dark easy-care
fabrics
SpeedPerfect,EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop; reduced rinse + spin and final spin
Curtains P– – ... 30 °C curtainsweighing 3.5 kg, or light curtains measuring 25 -
30 m²
SpeedPerfect,EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop; reduced rinse + spin and final spin
Shirts/Blouses G– – ... 60 °C
2 kg
Non-iron shirts made of cotton, linen, synthetic fibres or blended fabrics
SpeedPerfect,EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop; gentle spin only, hang up dripping wet
Down W– – ... 60 °C machine-washable fabrics filled with down SpeedPerfect, EcoPerfect, Water Plus, Rinse Plus, Stains, Rinse stop;
large parts individually wash detergent sparingly dosed
Delicates/Silk – – ... 40 °C For delicate, washable fabrics, e.g. made of silk, satin,
synthetic fibres or blended fabrics (e.g. curtains)
SpeedPerfect,EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop; gentle spin between the rinse cycles only
øWool /– – ... 40 °C Hand or machine-washable fabrics made of wool or con-
taining wool
Rinse stop; particularly gentle wash programme to prevent shrinkage of laundry,
longer breaks during the programme (fabrics rest in the detergent solution)
SuperQuick 15’ 6– – ... 40 °C Easy-care fabrics made of cotton, linen, synthetic fibres or
blended fabrics
Rinse stop; short programme, approx. 15 minutes, suitable for lightly soiled washing
Sport, Fitness – – ... 40 °C Fabrics made from microfibre SpeedPerfect, EcoPerfect, Water Plus, Rinse Plus, Stains, Rinse stop Additional programmes cRinse, cSpin, >Empty,
0709 / 9000472832 *472832* WAS32794ME
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland

8
Safety instructions
– Read the instruction manual and installation instructions and all other information enclosed
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug.
– Only insert/pull out the mains plug with dry hands.
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning – Keep detergents and care products out of the rea ch of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values
Programme Option Load Electricity
consumption*** Water*** Programme
duration***
LFCottons 30 °C** 8 kg 0,33 kWh 57 l 2:06 h
LFCottons 40 °C** 8 kg 0,95 kWh 57 l 2:16h
LFCottons 60 °C** 8 kg 1,45 kWh 57 l 2:26 h
LFCottons 60 °C jEcoPerfect *8 kg 1,06 kWh 56 l 3:25 h
LFCottons 90 °C 8 kg 2,32 kWh 68 l 2:16 h
IMix 40 °C** 3.5 kg 0,46 kWh 37 l 0:53 h
IEasy-Care 40 °C** 3.5 kg 0,54 kWh 41 l 1:35 h
cDelicate/Silk – – (cold) 2 kg 0,04 kWh 35 l 0:41 h
cDelicate/Silk 30 °C 2 kg 0,14 kWh 35 l 0:41 h
øWool /– – (cold) 2 kg 0,06 kWh 40 l 0:40 h
øWool /30 °C 2 kg 0,16 kWh 40 l 0:40 h
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC.
** Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the
maximum spin speed.
As a short programme for coloureds, select the programme MFMix 40 °C with the maxi-
mum spin speed.
***The values deviate from the indicated values depending on water pressure, hardness, and inlet
temperature, ambient temperature, type, amount and soiling of the laundry, detergent used, fluc-
tuations in the power supply and selected additional functions. 8
9
Important information
Before washing for the first time
Do not put any laundry in the machine. Turn on the tap, add approximately 1 litre of water and
then ½ a measuring cup of detergent into compartment II. Turn the programme selector to
IEasy-Care 60 °C and choose $Start/Reload. At the end of the programme, turn the
programme selector to Off.
Protecting the laundry and the machine
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Loading the laundry
Insert large and small items of laundry.
Take care not to trap items of laundry between the washing machine door and the rubber
seal.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, select the additional iSpeedPerfect function.
Pre-treat any stains as necessary.
heavy Do not load as much laundry. Select the program with Prewash.
Soaking Load laundry of the same colour.
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to LFCottons 30 °C and press $Start/Reload.
After approx. 10 minutes, press $Start/Reload to pause the programme. Once the
required soaking time has elapsed, press $Start/Reload again to continue the programme,
or select a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour starch into the ~fabric softener compartment in accordance with the manufacturer's instructions (rinse first if
necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions. Do not use the washing machine for
bleaching clothes.
Load indicator
The load sensor detects how heavily the washing machine is loaded. The laundry is not
weighed.
Recommended dosage
Based on the selected programme and the detected load, the recommended dosage function
provides a recommendation for the detergent dosage in %. The % figure refers to the
recommendation of the detergent manufacturer.
Automatic load sensing
Independently of the load indicator, the automatic load sensing function uses additional
sensors to adapt the water and power consumption ideally to each programme, depending
on the type of fabric and the load.
10
Insert for liquid detergent model-dependent
Position the insert for dispensing liquid detergent:
– Remove the detergent drawer completely –> page 10.
– Slide the insert forwards.
Do not use the insert (slide upwards):
– for gel detergents and washing powder,
– for programmes with 7Prewash or the end time option.
Care
ʑMachine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
– Remove detergent and cleaning agent residue immediately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and
dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can
evaporate.
ʑDrum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
ʑDescaling No laundry in the machine.
Not necessary if the detergent is measured out correctly. However, if it is, follow the
instructions of the descaling agent manufacturer.
Information on the display panel depending on model
Door open? Close the washing machine door properly; laundry may be caught.
Tap closed? Open the tap completely, supply hose kinked or trapped; Clean the
filter –> page 11, Water pressure too low.
Pump blocked? Detergent solution pump blocked; Clean the detergent solution pump
–> page 11.
Drainage hose/waste pipe blocked; Clean the drainage hose at the
siphon –> page 11.
Top-up not possible;
water level too high
or Temperature too high
Not possible to add more laundry. To continue, press the Start/Reload
button.
F: 23 Water in the base tub, appliance leaking. Call the after-sales service.
F: 34 Washing machine door cannot be locked. Open the washing machine
door and close it with an audible "click"; switch the appliance off and
on again; set the programme and make your settings; start the
programme.
Other displays Switch off the appliance, wait for 5 seconds and switch it back on. If
the display appears again, call the after-sales service –> page 13.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No solvents.
11
Information about blockages
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. Take the drainage hose out of the retainer.
Remove the sealing cap, allow the detergent solution to flow out.
Push the sealing cap back on.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent solution
pump must rotate).
5. Replace the pump cover and screw it on tightly. The handle is vertical. Place the drainage hose
back into the retainer.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into
compartment II and start the >Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock
Do no immerse the Aqua-Stop safety device in water (it contains an electrical valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Spin/ >Empty).
3. Choose $Start/Reload. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose from the rear of the appliance.
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
–Risk of scalding. Allow the detergent
solution to cool down.
–Turn off the tap.
12
What to do if ...
ʑWater is leaking out. – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
–$Start/Reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter –> page 11.
– Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
– Safety function active. Programme termination? -> page 4.
–Rinse stop (no final spin) selected? –> page 3, 4.
– Can be opened by emergency release only?–> page 13.
ʑProgramme does not
start.
–$Start/Reload or end time selected?
– Washing machine door closed?
– Childproof lock active? Deactivate –> page 5.
ʑDetergent solution is not
drained.
–Rinse stop (no final spin) selected? –> page 3, 4.
– Clean the detergent solution pump –> page 11.
– Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
– Not a fault - water below the visible area.
ʑSpin result not
satisfactory.
Laundry wet/too damp.
– Not a fault - the unbalanced load detection system has cancelled
the spin cycle due to uneven distribution of the laundry.
Distribute large and small items of laundry evenly in the drum.
–Easy-Iron selected? –> page 5.
– Speed selected too low? –> page 5.
ʑSpin cycle performed
several times.
– Not a fault - unbalanced load detection system is adjusting the
imbalance.
ʑResidual water in the
~compartment for care
products.
– Not a fault - the action of the care product is not affected.
– Clean the insert if necessary –> page 10.
ʑOdour formation in the
washing machine.
– Run programme LFCottons 90 °C without laundry. Use
standard detergent.
ʑ³3status indicator
flashes.
Appliance has detected
a detergent overload.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour
into compartment II (not with outdoor or down fabrics).
– Reduce the detergent dosage for the next wash cycle.
ʑLoud noise generated,
vibrations and
“wandering” during the
spin cycle.
– Are the appliance feet fixed?
Secure the appliance feet –> Installation instructions.
– Transportation safety devices removed?
Remove the transportation safety devices –> Installation
instructions.
ʑDisplay panel/indicator
lamps do not function
during operation.
– Power cut?
– Circuit breakers tripped or fuses blown? Reset the circuit
breakers or change the fuses.
– If the fault occurs repeatedly, call the after-sales service.
ʑProgramme sequence
longer than usual.
– Not a fault - unbalanced load detection system adjusts
imbalance by repeatedly distributing the laundry.
– Not a fault - foam detection system active - several rinse cycles
are added.
13
What to do if ...
ʑDetergent residues on
the laundry.
– Occasionally, phosphate-free detergen ts contain water-insoluble
residues.
–Select cRinse or brush the laundry after washing.
ʑIn Reload mode,
$Start/Reload flashes
very quickly and a signal
sounds.
– Water level too high. Not possible to add laundry. Close the
washing machine door immediately if necessary.
– To continue, press the $Start/Reload button.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales service –> Installation instructions.
Emergency release e.g. in the event of a power cut
The programme continues when the power supply is restored. However, if the laundry has to
be removed, the washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If possible, leave it to
cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the
glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution -> page 11.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
After-sales service
ʑBefore you call the after-sales service, please make sure that you cannot remedy the fault
yourself –> page 12, 13; What to do if ... .
ʑYou will be charged if a technician is called out, even during the warranty period.
ʑTo find your closest after-sales service, please refer to the enclosed directory or our website
–> page 1.
Please give the after-sales service the product number (E no.) and the production number
(FD) of the appliance.
Product number Production number
This information can be found:
on the inside of the washing machine door*/
opened service flap* and rear of the appliance.
*depending on the model
ʑPlease help us to avoid unnecessary call-outs by quoting the product and production
numbers. This will also save you the associated additional costs.
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and the separate installation instructions before
operating the washing machine.

1 2 >c$c$c>$$$$Pour liquid detergent into the appropriate dispenser a
Programmes
Detailed overview of programmes –> page 7.
Temperature and spin speed can be selected individually,
depending on the selected programme and programme
progress.
Cottons LFHard-wearing fabrics
Easy-care IEasy-care fabrics
Mix MFDifferent types of laundry
Delicate/Silk Delicate washable fabrics
øWool /Hand/machine-washable wool
Rinse Extra rinse with spin
Spin Extra spin with selectable spin speed
Empty >Empty the rinsing water with
Rinse stop (no final spin)
SuperQuick 15’ 6Extra short programme
Sensitive Hard-wearing fabrics; longer washing
and additional rinsing for particularly
sensitive skin
Sports, Fitness $Fabrics made from microfibre
Shirt/Blouse GNon-iron shirts
CurtainsPCurtains programme
Down Wwashable fabrics filled with down
Dark Wash Dark-coloured fabrics
– –, 20° - 90° °C ÔÈSet the temperature (– – = cold)
0, 400 - 1600* ÔÈSet the spin speed
(* model-dependent) (0=no spin dur-
ing the programme sequence)
Programme selectorDisplay panel/
menu buttons/change buttons
ʑʑʑʑʑ$$
Insert for liquid detergent (depending on model), –> page 10
Compartment II: detergent for main wash,
softener, bleach, stain remover
Your washing machine
Congratulations äyou have opted for a modern, high-quality
domestic appliance manufactured by Bosch. This washing machine
is distinguished by its economical water and energy consumption.
Each machine that leaves our factory is inspected thoroughly to
ensure that it functions properly and is in perfect condition.
Further information: http://www.bosch-hausgeraete.de
Bosch-Infoteam: [e-mail]
Intended use
Contents Page
ʋIntended use ......................................................................................1
ʋProgrammes .......................................................................................1
ʋSetting and adjusting the programme .......................................... 3
ʋWashing ..........................................................................................3/4
ʋAfter washing .....................................................................................4
ʋIndividual settings ..........................................................................5/6
ʋOverview of programmes ................................................................7
ʋSafety instructions .............................................................................8
ʋConsumption values .........................................................................8
ʋImportant information ...................................................................... 9
ʋInsert for liquid detergent.............................................................. 10
ʋCare ...................................................................................................10
ʋInformation on the display panel ..................................................10
ʋInformation about blockages ........................................................11
ʋWhat to do if... ............................................................................ 12/13
ʋEmergency release .........................................................................13
ʋAfter-sales service ...........................................................................13
Environmental protection/Conservation tips
– Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
– Wash normally soiled laundry without a prewash.
– Instead of the LFCottons 90 °C programme, select the
LFCottons 60 °C and the jEcoPerfect option. Comparable
cleaning result with significantly lower energy consumption.
– Measure the detergent according to the manufacturer's
instructions and water hardness.
– If the laundry is then dried in the tumble dryer, select the
appropriate spin speed according to the instructions of the dryer
manufacturer.
Automatic stain removal
Automatic treatment of 16 different types of stain possible. No
pretreatment of stains required - the washing machine automatically
adapts the washing process –> page 6.
Preparation Before washing for the first time
Wash once without any laundry –> page 9.
Compartment ~: fabric softener, starch
Compartment I: Detergent for prewash
ʋFor domestic use only
ʋFor machine-washable fabrics and hand-washable wool
in detergent solution
ʋTo be operated with cold drinking water and commer-
cially available detergents and care products which are
suitable for use in washing machines
– Do not leave children unattended near the washing machine.
– The washing machine is not to be used by children or persons
not familiar with the operating instructions.
– Keep pets away from the washing machine. ~Correct installation according to the
separate Installation instructions.
Check the machine
– Never use a damaged machine.
– Inform the after-sales service.
Connecting the mains
plug
Make sure your hands are dry.
Take hold of the plug only.
Turn the tap on
ʑij$#cS3ääääääää=c2[ʑ#%3
%&$#
$All buttons are sensitive and
need only to be touched lightly.
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
iLFIMFPGWø/6cc>

3 4
Switching off
Turn the programme selector to off.
Turning the tap off
Not required for Aqua-Stop models –> Installation
instructions, page 7.
Removing washing
Open the washing machine door and remove the
washing.
If Rinse stop (no final spin) is active: turn the
programme selector to >Empty or cSpin. Select the
spin speed if necessary.
Press $Start/Reload.
– Remove any foreign objects -
risk of rusting.
– Leave the washing machine door and
detergent drawer open so that any residual
water can evaporate.
Programme has ended when...
... finished, Remove washing appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: select cRinse.
– Press $Start/Reload.
Programmes at low temperatures:
– Select cSpin or >Empty.
– Press $Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press $Start/Reload). The new programme starts
from the beginning.
Reloading laundry, if ... –> page 6
...$Start/Reload is selected and Top-up possible
appears in the display panel.
– Do not leave the washing machine door open
for too long as water from the washing could
leak out.
– Load indicator not active when reloading.
Press $Start/Reload.
Sorting the laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load –> page 7.
Observe the important information –> page 9.
Detergents and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
During operation: open the detergent drawer carefully.
LFIMFø/>6$GPWÔÈÔÈProgramme selector Start/
Reload
ʑʑʑʑʑ$$
äʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFjBefore washing for the first time
Wash once without any laundry –> page 9.
Open the door/set the programme 1
2
Washing
~ʋʋʋ
Detergent drawer
with compartments I, II, ~Controlpanel
Washing machine door
handle
Serviceflap
Washingmachinedoor
**If the childlock is active –> deactivate it, page 5.
Follow the instructions in the display panel.
Washing
ʑij$#cS3ääääääää=c2[ʑ#%3
%&$#
6
Load indicator/rec-
ommended dosage
To activate, first open the door, set the programme
and then load the items of laundry.
Loading the laundry
Observe the load indicator in
the display –> page 9
4
Close the
washing
machine door
Make individual settings
–> page 5.
Stain selection –> page 6.
Select the temperature/
spin speed –> page 2.
5
Select $Start/Reload
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
Dilute thick fabric softener and care products with water.
This prevents blockages.
3
Adding detergent and
care products
Observe the dosage
recommendation for detergent
in the display –> page 9
iLFIMFPGWø/6cc>

5 6
>c$c$c>$$$$
LFIMFø/>6$GPWÔÈÔÈ Individual settings
Stain selection
The correct treatment for every stain
Do not let stains dry. Remove any solid residue beforehand. Sort items of laundry as usual
and load the washing machine. Select a type of stain (cannot be combined).
ʑA total of 16 different stains can be selected. The washing machine adjusts the washing
temperature, drum movement and soaking time to suit the type of stain. Hot or cold water,
gentle or intensive washing control (thanks to the new drum structure) and a long or short
soaking time ensure that the wash programme has a special sequence for each type of
stain.
ʑA stain type can be added to each programme via the menu buttons/change buttons.
ʑThe result: optimum stain treatment without the use of additional special detergents.
ʑStains
Baby food
Blood
Egg
Soil and sand
Grass
Coffee
Cosmetics
Red wine stain
Chocolate
Sweat
Bottom sock dirt
Butter and edible oil
Tea
Tomato
Strawberry
Orange
ʑStain treatment in detail - 2 examples
Egg Soaked in lukewarm water, selected wash cycle with a higher
water level and additional rinse cycles to remove particles
Blood Blood is first "loosened" in cold water, then the selected wash
programme starts.
For the other types of stain, we have formulated comparable solutions in our intensive
studies.
Reload
If you want to add additional items of laundry after the programme has started, choose
$Start/Reload. The machine checks whether reloading is possible. Follow the instructions
in the display panel.
For safety reasons, the washing machine door remains locked when the water level and/or
temperature is high, or while the drum is rotating.
To continue the programme, press the $Start/Reload button.
äʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFj~ʋʋʋ~Individual settings
ʑOptions see also the Overview of programmes
VarioPerfect*
iSpeedPerfect - Standard -
jEcoPerfect
SpeedPerfect: For washing in a shorter time with a washing
outcome comparable to that of the standard programme.
Maximum load –> Overview of programmes, page 7.
EcoPerfect: For saving energy with a washing performance
comparable to that of the standard programme.
End time*When you select the programme, the respective time to the
end of the programme is displayed. It can be adjusted to a
maximum of 24 hours in 1-hour increments. Press the
$/#change buttons repeatedly until the desired number of
hours is displayed (h=hour). It is not possible to make
adjustments once the programme has started.
cPrewash
OFF - ON
For heavily soiled items. Prewash at max. 30 °C
SEasy-iron
OFF - ON
Special spin sequence with subsequent fluffing. Gentle final
spin at reduced speed. Residual moisture in the laundry is
increased slightly.
3Signal*Select the volume of the information signals.
OFF äquiet ämedium äloud ävery loud
Button signal*Select the volume of the button signals.
OFF äquiet ämedium äloud ävery loud
Language*Select the language of the display texts.
=Water Plus
OFF - ON
Increased water level. Gentler treatment of the laundry.
cRinse stop
OFF - ON
After the final rinse, the laundry remains in the water.
2Rinse Plus*
max. +3 Rinse cycles
Extra rinsing. Prolonged programme duration.
Recommended use: for particularly sensitive skin and/or in
areas with very soft water.
[Stain selection*Automatic treatment of stubborn stains -> page 6.
ʑDisplay symbols
#Childproof lock/appliance
lock
OFF - ON
You can lock the washing machine to prevent the functions
you have set from being changed inadvertently.
To activate/deactivate: press and hold the %menu button for
5 seconds.
Note: the childproof lock remains activated until you start the
next programme, even after the machine has been switched
off.
Deactivate the childproof lock again when you have switched
on the machine.
3Foam detection Too much foam in the washing machine. Foam detection
system active - special programme sequence to reduce foam.
%/&To select menu options
Information on programme
sequence; with progress or
load bar, as appropriate
$/#To change settings
available depending on the
selected
*If the buttons are held for longer,
the appliance automatically scrolls
through the subsequent setting
options
$
iLFIMFPGWø/6cc>

>c$c$c>$$$$
LFIMFø/>6$GPWÔÈÔÈ ʑʑʑʑʑ$$
äʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋLFLFj~ʋʋʋ~ʑij$#cS3ääääääää=c2[ʑ#%3%&$#$
7
Overview of programmes –> table of consumption values on page 8 and instructions on page 9.
* reduced load for iSpeedPerfect option
Mix 40 °C with maximum spin speed is ideal as a short programme.
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the detergent between compartments Iand II.
Programmes °C max. Type of laundry Options; notes
Cottons LF– – ... 90 °C
8 kg/
5 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cot- ton or linen
SpeedPerfect*, EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop
Sensitive – – ... 60 °C Hard-wearing fabrics made of cotton or linen
SpeedPerfect*, EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains, Rinse stop;for particularly sensitive skin, longer wash cycle at selected temperature, higher water level, additional rinse cycle
Easy-care I– – ... 60 °C
3.5 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics
SpeedPerfect, EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop
Mix MF– – ... 40 °C Fabrics made of cotton and easy-care fabrics SpeedPerfect, EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop; different types of laundry can be washed together
Dark Wash – – ... 40 °C Dark-coloured fabrics made of cotton and dark easy-care
fabrics
SpeedPerfect,EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop; reduced rinse + spin and final spin
Curtains P– – ... 30 °C curtains weighing 3.5 kg, or light curtains measuring 25 -
30 m²
SpeedPerfect, EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop; reduced rinse + spin and final spin
Shirts/Blouses G– – ... 60 °C
2 kg
Non-iron shirts made of cotton, linen, synthetic fibres or blended fabrics
SpeedPerfect,EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop; gentle spin only, hang up dripping wet
Down W– – ... 60 °C machine-washable fabrics filled with down SpeedPerfect, EcoPerfect, Water Plus, Rinse Plus, Stains, Rinse stop;
large parts individually wash detergent sparingly dosed
Delicates/Silk – – ... 40 °C For delicate, washable fabrics, e.g. made of silk, satin,
synthetic fibres or blended fabrics (e.g. curtains)
SpeedPerfect, EcoPerfect,Prewash, Easy-Iron, Water Plus, Rinse Plus,
Stains,Rinse stop; gentle spin between the rinse cycles only
øWool /– – ... 40 °C Hand or machine-washable fabrics made of wool or con-
taining wool
Rinse stop; particularly gentle wash programme to prevent shrinkage of laundry, longer breaks during the programme (fabrics rest in the detergent solution)
SuperQuick 15’ 6– – ... 40 °C Easy-care fabrics made of cotton, linen, synthetic fibres or
blended fabrics
Rinse stop; short programme, approx. 15 minutes, suitable for lightly soiled washing
Sport, Fitness – – ... 40 °C Fabrics made from microfibre SpeedPerfect, EcoPerfect, Water Plus, Rinse Plus, Stains, Rinse stop Additional programmes cRinse, cSpin, >Empty,
0709 / 9000472832 *472832* WAS32794ME
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland

8
Safety instructions
– Read the instruction manual and installation instructions and all other information enclosed
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug.
– Only insert/pull out the mains plug with dry hands.
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values
Programme Option Load Electricity
consumption*** Water*** Programme duration***
LFCottons 30 °C** 8 kg 0,33 kWh 57 l 2:06 h
LFCottons 40 °C** 8 kg 0,95 kWh 57 l 2:16h
LFCottons 60 °C** 8 kg 1,45 kWh 57 l 2:26 h
LFCottons 60 °C jEcoPerfect *8 kg 1,06 kWh 56 l 3:25 h
LFCottons 90 °C 8 kg 2,32 kWh 68 l 2:16 h
IMix 40 °C** 3.5 kg 0,46 kWh 37 l 0:53 h
IEasy-Care 40 °C** 3.5 kg 0,54 kWh 41 l 1:35 h
cDelicate/Silk – – (cold) 2 kg 0,04 kWh 35 l 0:41 h
cDelicate/Silk 30 °C 2 kg 0,14 kWh 35 l 0:41 h
øWool /– – (cold) 2 kg 0,06 kWh 40 l 0:40 h
øWool /30 °C 2 kg 0,16 kWh 40 l 0:40 h
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC.
** Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the
maximum spin speed.
As a short programme for coloureds, select the programme MFMix 40 °C with the maxi-
mum spin speed.
***The values deviate from the indicated values depending on water pressure, hardness, and inlet
temperature, ambient temperature, type, amount and soiling of the laundry, detergent used, fluc-
tuations in the power supply and selected additional functions. 8
9
Important information
Before washing for the first time
Do not put any laundry in the machine. Turn on the tap, add approximately 1 litre of water and
then ½ a measuring cup of detergent into compartment II. Turn the programme selector to
IEasy-Care 60 °C and choose $Start/Reload. At the end of the programme, turn the
programme selector to Off.
Protecting the laundry and the machine
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Loading the laundry
Insert large and small items of laundry.
Take care not to trap items of laundry between the washing machine door and the rubber
seal.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, select the additional iSpeedPerfect function.
Pre-treat any stains as necessary.
heavy Do not load as much laundry. Select the program with Prewash.
Soaking Load laundry of the same colour.
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to LFCottons 30 °C and press $Start/Reload.
After approx. 10 minutes, press $Start/Reload to pause the programme. Once the
required soaking time has elapsed, press $Start/Reload again to continue the programme,
or select a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour starch into the ~fabric softener compartment in accordance with the manufacturer's instructions (rinse first if
necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions. Do not use the washing machine for
bleaching clothes.
Load indicator
The load sensor detects how heavily the washing machine is loaded. The laundry is not
weighed.
Recommended dosage
Based on the selected programme and the detected load, the recommended dosage function
provides a recommendation for the detergent dosage in %. The % figure refers to the
recommendation of the detergent manufacturer.
Automatic load sensing
Independently of the load indicator, the automatic load sensing function uses additional
sensors to adapt the water and power consumption ideally to each programme, depending
on the type of fabric and the load.
7ʑʑʑ
>>$ʑʑ$ʑʑ$ʑʑʑʑʑ~ʑLFʑ³3ʑʑʑʑcʑ$$ʑʑʑʑ

LFLFLFLFjLFIIccø/ø/MFI$iLF$$$~
10
Insert for liquid detergent model-dependent
Position the insert for dispensing liquid detergent:
– Remove the detergent drawer completely –> page 10.
– Slide the insert forwards.
Do not use the insert (slide upwards):
– for gel detergents and washing powder,
– for programmes with 7Prewash or the end time option.
Care
ʑMachine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
– Remove detergent and cleaning agent residue immediately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and
dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can
evaporate.
ʑDrum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
ʑDescaling No laundry in the machine.
Not necessary if the detergent is measured out correctly. However, if it is, follow the
instructions of the descaling agent manufacturer.
Information on the display panel depending on model
Door open? Close the washing machine door properly; laundry may be caught.
Tap closed? Open the tap completely, supply hose kinked or trapped; Clean the
filter –> page 11, Water pressure too low.
Pump blocked? Detergent solution pump blocked; Clean the detergent solution pump
–> page 11.
Drainage hose/waste pipe blocked; Clean the drainage hose at the
siphon –> page 11.
Top-up not possible;
water level too high
or Temperature too high
Not possible to add more laundry. To continue, press the Start/Reload
button.
F: 23 Water in the base tub, appliance leaking. Call the after-sales service.
F: 34 Washing machine door cannot be locked. Open the washing machine
door and close it with an audible "click"; switch the appliance off and
on again; set the programme and make your settings; start the
programme.
Other displays Switch off the appliance, wait for 5 seconds and switch it back on. If
the display appears again, call the after-sales service –> page 13.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No solvents.
11
Information about blockages
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. Take the drainage hose out of the retainer.
Remove the sealing cap, allow the detergent solution to flow out.
Push the sealing cap back on.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent solution
pump must rotate).
5. Replace the pump cover and screw it on tightly. The handle is vertical. Place the drainage hose
back into the retainer.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into
compartment II and start the >Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock
Do no immerse the Aqua-Stop safety device in water (it contains an electrical valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Spin/ >Empty).
3. Choose $Start/Reload. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose from the rear of the appliance.
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
–Risk of scalding. Allow the detergent
solution to cool down.
–Turn off the tap.
ʑʑ$ʑʑ$ʑʑʑʑʑ~ʑLFʑ³3ʑʑʑ
ʑcʑ$$ʑʑʑʑ

LFLFLFLFjLFIIccø/ø/MFI$iLF$$$~7ʑʑʑ>>$
12
What to do if ...
ʑWater is leaking out. – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
–$Start/Reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter –> page 11.
– Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
– Safety function active. Programme termination? -> page 4.
–Rinse stop (no final spin) selected? –> page 3, 4.
– Can be opened by emergency release only?–> page 13.
ʑProgramme does not
start.
–$Start/Reload or end time selected?
– Washing machine door closed?
– Childproof lock active? Deactivate –> page 5.
ʑDetergent solution is not
drained.
–Rinse stop (no final spin) selected? –> page 3, 4.
– Clean the detergent solution pump –> page 11.
– Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
– Not a fault - water below the visible area.
ʑSpin result not
satisfactory.
Laundry wet/too damp.
– Not a fault - the unbalanced load detection system has cancelled
the spin cycle due to uneven distribution of the laundry.
Distribute large and small items of laundry evenly in the drum.
–Easy-Iron selected? –> page 5.
– Speed selected too low? –> page 5.
ʑSpin cycle performed
several times.
– Not a fault - unbalanced load detection system is adjusting the
imbalance.
ʑResidual water in the
~compartment for care
products.
– Not a fault - the action of the care product is not affected.
– Clean the insert if necessary –> page 10.
ʑOdour formation in the
washing machine.
– Run programme LFCottons 90 °C without laundry. Use
standard detergent.
ʑ³3status indicator
flashes.
Appliance has detected
a detergent overload.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour
into compartment II (not with outdoor or down fabrics).
– Reduce the detergent dosage for the next wash cycle.
ʑLoud noise generated,
vibrations and
“wandering” during the
spin cycle.
– Are the appliance feet fixed?
Secure the appliance feet –> Installation instructions.
– Transportation safety devices removed?
Remove the transportation safety devices –> Installation
instructions.
ʑDisplay panel/indicator
lamps do not function
during operation.
– Power cut?
– Circuit breakers tripped or fuses blown? Reset the circuit
breakers or change the fuses.
– If the fault occurs repeatedly, call the after-sales service.
ʑProgramme sequence
longer than usual.
– Not a fault - unbalanced load detection system adjusts
imbalance by repeatedly distributing the laundry.
– Not a fault - foam detection system active - several rinse cycles
are added.
13
What to do if ...
ʑDetergent residues on
the laundry.
– Occasionally, phosphate-free detergents contain water-insoluble
residues.
–Select cRinse or brush the laundry after washing.
ʑIn Reload mode,
$Start/Reload flashes
very quickly and a signal
sounds.
– Water level too high. Not possible to add laundry. Close the
washing machine door immediately if necessary.
– To continue, press the $Start/Reload button.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales service –> Installation instructions.
Emergency release e.g. in the event of a power cut
The programme continues when the power supply is restored. However, if the laundry has to
be removed, the washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If possible, leave it to
cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the
glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution -> page 11.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
After-sales service
ʑBefore you call the after-sales service, please make sure that you cannot remedy the fault
yourself –> page 12, 13; What to do if ... .
ʑYou will be charged if a technician is called out, even during the warranty period.
ʑTo find your closest after-sales service, please refer to the enclosed directory or our website
–> page 1.
Please give the after-sales service the product number (E no.) and the production number
(FD) of the appliance.
Product number Production number
This information can be found:
on the inside of the washing machine door*/
opened service flap* and rear of the appliance.
*depending on the model
ʑPlease help us to avoid unnecessary call-outs by quoting the product and production
numbers. This will also save you the associated additional costs.

LFLFLFLFjLFIIccø/ø/MFI$iLF$$$~7ʑʑʑ>>$ʑʑ$ʑʑ$ʑʑʑʑʑ~ʑLFʑ³3ʑʑʑʑcʑ$$ʑʑʑʑ
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and the separate installation instructions before
operating the washing machine.