Bosch WAS32798ME User manual

1 2 3 4 5 6
Switching off
Turn the programme selector to Off.
Turning off the tap
Not required for AquaStop models aInstallation instructi ons,
page 7.
Removing the washing
Open the washing machine door and remove the washing.
If Rinse stop (no final spin) i s active: turn the programme selecto r
to >Empty or Spin. Select the spin speed if neces sary.
Press $Start/Reload.
– Remove any foreign objects -risk of rusting.
–Leave the washing machine door and detergent drawer
open so that any residual water can dry.
Programme finished when ...
... finished, Remove washing appears on the display panel.
If the display panel lighting is off,press any button
aEnergy saving mode, page 1.
Cancelling the programme
Programmes at high temperatures
–Cool laundry: Select Rinse.
–Select $Start/Reload.
Programmes at lower temperatures:
–Select Spin or >Empty.
–Select $Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme b y mistake:
– Reselect the programme.
–Press $Start/Reload. The new programme starts fromthe
beginning.
Adding laundry, if ...apage 6
... $Start/Reload is selected and T op-up possible appears o n the
display panel.
– Do not leave the washing ma chine door open for too long as
water from the washing could leak out.
–Load display no t active when reloading.
Select $Start/Reload.
Sorting the laundry
Follow the manufacturer's care information.
According to the information on t hec are labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7.
Observe the important information apage 9.
Detergents and care products
Measure accordingly:
Amount of laundry, level of soiling, water hardness (ask yourwa ter supply company) and
manufacturer's instructions.
Models without insert for liquid detergent:
Pour liquid detergent into the appropriate disp enser and place in the drum.
During operation: Open the detergent dr awer with care.
Programme selectorDisplay panel/
options buttons /change butto ns
Start /
Reload
Individual settings
Select stain
The correct treatment for every stain
Do not let stains dry. Remove any solid residue beforehand. Sort items of laun drya s usual and load the washing
machine. Select a type of stain (cannot b e combined).
ʑAto tal of 16 different stain s can be selected. The wa shing machine adjusts the wa shing temperature, drum movem ent
and soaking time to suit the type of stain.Hot o rc old water, gentle or intensive washing control (than ks to the new
drum structure) and a long or short soaking time ensure that the washprogr amme has a special sequence for each
type of stain.
ʑUsing the Options button, selectSelect stain; change w ith the C hange /buttons;
select a stain.
ʑStains
baby food
blood
bott. sock. dirt
butter/edi. oil
chocolate
coffee
cosmetics
egg
grass
orange
red wine stain
soil and sand
strawberry
sweat
tea
tomato
ʑStain treatment in detai l - 2 examples
egg Soaked in lukewarm water, selected wash cycle with a higher water level an d
additional rinse cycles to remove p articles
blood Blood is first “loosened” in cold water, then the selected wash progr amme
starts.
For the other types of stain, we have formulated comparable solution si n ouri ntensive studies.
Start / Reload
If you want to add additional items of laundry after the programme hasstarted, c hoose $Start/Reload. The
machine checks whether topping up laundryis po ssible. Follow the instructions in the displa y panel.
For safety reasons, the washing machine doorrema ins locked when the water level and/or temperature is high, or
while the drum is rotating.
To continue the programme, press the $Start/Reload button.
Insert for liquid detergent (depending on model), apage 10
Compartment II:detergent for main wa sh,
water softener, bleach, stain remover
Your washing machine
Congratulations äyou have chosen a modern, high-quality domestic appliance
manufactured by Bosch. A distinctive feature o f the washing machine is its economical
water and energy consumption.
Each machine that leaves our factory is in spected thoroughly to ensure that it functions
properly and is in perfect condition.
For more information on our products, accessories, repla cement parts and services, see
our website www.bosch-home.com or contact our after-sales service centres.
Intended use
Contents Page
ʔIntended use .......................................................................................................................... 1
ʔProgrammes ..........................................................................................................................1
ʔSetting and adjusting the programme .............................................................................3
ʔWashing .............................................................................................................................3/4
ʔAfter washing ............................... ..........................................................................................4
ʔIndividual settings ................ ............................................................................................ 5/6
ʔOverview of programmes ....................................................................................................7
ʔSafety instructions ................................................................................................................8
ʔConsumption values ....................................... ......................................................................8
ʔImportant information ...................................... ....................................................................9
ʔInsert for liquid detergent ................................................................................................ 10
ʔCare .......................................................................................... .............................................10
ʔInformation on thedisplay panel...................................... .............................................. 10
ʔInformation about blockages .......................................................................................... 11
ʔWhat to do if... ...............................................................................................................12/13
ʔEmergency release ............................................................................................................13
ʔAfter-sales service ............... ............................................................................................... 13
Environmental protection / C onservation tips
– Always fill the washing machine with a maximum amountof laundry for therelevant
programme.
– Wash laundry with normal soiling withouta p re-wash.
–Instead of LFCottons 90 °C,select the LFCottons 60 °C p rogramme and
the jEcoPerfect additional function. Comparable cleanin g result with
significantly lower energy consumption.
– Measure the detergent according to themanuf acturer's instructions and water
hardness.
–Energy saving mode:The display panel lightinggoes outafter afew minutes;
$Start/Reload flashes. Press any butto n to turn the light back on.
–If the laundry is then to be driedin thetumble dryer,select theappropriate spin
speed according to the instructions from the dryer manufacturer.
Automatic stain removal
Automatic treatment of 16 different types of stain possible. No pretreatment of stains
required - the washing machine automatically adapt sth e washing process apage 6.
Preparation Before the first wash
Run a wash cycle wi thout laundry aPage9
Open the door / set the programme* 1
Washing
Compartment ~:fabric softener, starch
Compartment I:Detergent for pre-wash
ʔFor domestic use only
ʔFor machine-washable fabrics and hand-washable wool in detergent
solution
ʋTo be operated with cold drinking water and commercially-availa ble
detergents and care products that are su itable for use in washing
machines.
– Do not leave children unattended near th e washing machine.
– The washing machine is not tobe usedby chi ldren or persons
not familiar with the operating instruct ions.
–Keep pets away from the wa shing machine.
Detergent drawer
with compartments I, II, ~Control panel
Washing machine door
handle
Service flap
Washing machine door
Install correctly, according to th e separate
Installation instructions.
Check the machine
– Never use a damaged machine.
– Inform the after-sales service.
Connect the mains plug
Make sure your hands are dry.
Take hold of the plug only.
Turn the tap on
*If the childlock is active aDeactivate, page 5.
Follow the instructions in the display panel.
Washing
Individual settings
ʑOptions see also the Overview of programmes
VarioPerfect*
SpeedPerfect i- Standard -
EcoPerfect jSpeedPerfect:For washing in a shorter time wi th a washing outcome
comparable to that of the standard pr ogramme. Maximum load
aOverview of programmes, pa ge7 .
EcoPerfect:For saving energy with a washing performanceco mparable to
that of the standard programme.
end time*When you select the programme, the respective time to the end of the pro-
gramme is displayed. It can be adjusted to a maximum of 24 hours in 1-hour
increments. Press the Change /button repeatedly until the required
number of hours is displayed (h =hour). It is not possible to make adjustments
once the programme has started .
Prewashcoff - on For heavily soiled items. Prewashat max.30 ° C.
SEasy-iron
off - on
Special spin sequence with subsequent fluffing. Gentle final spin at reduced
speed. Residual moisture in the laundry is increasedsli ghtly.
3Signal*Select the volume of the informatio n signals.
off äquiet ämedium äloud ävery loud
button signal*Select the volume of the butt on signals.
off äquiet ämedium äloud ävery loud
language*Select the language of the dis play texts.
Water Plus
off - on
Increased water level. Gentler treatment of thelaundr y.
Rinse stop
off - on
After the final rinse, the laundry rema ins in the water.
2Rinse Plus*
max. +3 Rinse cycles
Extra rinse. Prolonged programme duration. Recommended use: fo r
particularly sensitive skin and/or in areas withvery soft water.
[stain selection*Automatic treatment of tough sta ins aPage 6.
ʑDisplay symbols
Childproof lock/appliance lock
off - on #You can lock the washing machine to prevent the fun ctions you have set from
being changed inadvertently.
To activate: Press and hold the ÙOptions button for 5 seconds.
The #symbol lights up.
To deactivate: Press and hold the ÙOptions button for 5 seco nds.
– If the programme selector is adjus ted after the appliance has started:
The #symbol flashes. First, reset the progr amme selector to the
original programme, then deactivate.
– The childlock can r emain activated until you startthe next programme, ev en
after the machine has been switched off ( then ame of the last programme
run appears on the display panel).
Then you can deactivate the chil dlock again before starting the programme
and activate it again as necessary on ceth e programme has started.
3Foam detection Too much foam in the washing machine. Foam detection system active -
special programme sequence to reduce foam.
Select options Ù/Information on programme
sequence; with progress or
load bar, as appropriate
Change settings /available depending on the
selected programme
*If the buttons are heldfor longer ,
the appliance automatically scrolls
through the subsequent settin g
options
6
Load indicator/
recommended dosage
To activate, first open the door, set the p rogramme and
then load the items of laundry.
Load laundry
Observe the load display on the
display panel apage 9
Close the washing
machine door
Dilute thick fabric softener and care productswi th water.
This prevents blockages.
Add detergent and
care products
Observe the dosage
recommendation for detergent on the
display panel apage 9
2
3
4Drum interior light
(depending on model) comes on
when the door is opened or closed,
or when a programme is started;
goes out automatically.
–– ,20° - 90° °C ÔÈSet the temperature (– – = cold)
0, 400 - 1600* ÔÈSet the spin speed
(* model-dependent) (0 = no spin during the
programme sequence)
All buttons are sensitive and need o nly
to be touched lightly.
Programme selector for
switching the machine on
and off and for selecti ng the
programme. Can be turned
in either direction.
Selecting individual s ettings a page 5.
Select stain
a page 6.
Setting the tempera ture / spin speed
a page 2.
5
Programmes
Detailed overview of programmes apage 7 .
Temperature and spin speed can be selec ted individually,
depending on the selected programme a nd programme progress.
LFCottons Hard-wearing fabrics
Easy-Care Easy-care fabrics
1Mix Different types of laundry
Delicate/Silk Delicate washable fabrics
O:Wool Hand/machine-washable wool
Rinse Extra rinse with spin
Spin Extra s pin with selectable spin speed
>Empty Empty the r insing water with
Rinse stop (no final s pin)
6SuperQuick 15’ Extra short programme
VSensitive Hard-wearing fabrics; longer washing and addi -
tional rinsing for particularly sensitive skin
ZSports, Fitness Fabrics made from microfibre, do not tr eat laundry
with fabric softener
Shirt/Blouse Non-iron shirts
PCurtains Curtains programme
V+ Sensitive Plus washablefa brics filled with down apage 9
Dark Wash Bed linen or dark-coloured fabrics
Select $Start/Reload
7
0810 / 9000587246 *587246* WAS32798ME
WAS32745ME
WAS32795GC
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
Overview of programmes atable of consum ption values on page 8 and instructions on page 9.
*reduced load for SpeedP erfect ioption
1Mix 40 °C with maxim um spin speed is ideal as a short programme.
Programmes without pr ewash - add detergent to c ompartment II, programmes withprewa sh - distribute the detergent between co mpartments Iand II.
Programmes °C
(– – = cold) max . Type of laundry Options; notes
LFCottons – – ... 90°C
8 kg/ 5 kg*
Hard-wearing fabrics, hea t-resistant fabrics made of cotton or lin en
SpeedPerfect i*, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Ri nse stop VSensitive – – ... 60 °C Hard-wearing fabrics m ade of cotton or linen
SpeedPerfect i*, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selecti on [, Rinse stop ;for particularly sensi tive skin, longer
wash cycle at select ed temperature, higher w ater level, additional rinse cycle
Easy-Care – – ... 60 °C
3.5 kg
Easy-care fabrics made ofcotton, l inen, synthetic fibres or blen ded fabrics
SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Ri nse stop 1Mix – – ... 40°C Fabrics made of cotton a nd easy-care fabrics
SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Ri nse stop ;
different types of la undry can be washed togeth er
Dark Wash – – ... 40°C Delicate bed linen or dark-coloured fabrics
made of cotton and da rk easy-care fabrics
SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Ri nse stop ;reduced rinse + spin and final spin
PCurtains – – ... 40 °C curtains weighing 3. 5 kg, or light curtains
measuring 25 - 30 m ²
SpeedPerfect i, EcoPerfect j, Water Plus , Rinse Plus 2, stain selection [,
Rinse stop ; reduced rinse + sp in and final spin
Shirt/Blouse – – ... 60 °C
2 kg
Non-iron shirts made o f cotton, linen, syn- thetic fibres or blended fab rics
SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus , Rinse
Plus 2, stain selection [, Rinse stop ; gentle sp in only, hang up dripping wet
V+ Sensitive Plus – – ... 60°C machine-washable fabr ics filled with down
(no cushions or bedding)
SpeedPerfect i, EcoPerfect j,Water Plus , Rinse Plus 2, Rinse stop ;
wash large items separately, bespar ing with washing detergent apage 9
Delicate/Silk – – ... 40 °C
For delicate, washable fabrics, e.g.made o f silk, satin, synthetic fi bres or blended fabrics (e.g. curtains)
SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Ri nse stop ;
gentle spin between the rinse cycles only
O:Wool – –... 40 °C Hand or machine-w ashable fabrics made of
wool or containing wool
Rinse stop; particularly gentle wash programme to prevent shrinkage of laun-dry, long er
breaks during the pr ogramme (fabrics rest in the detergent solution)
6SuperQuick 15’ – – ... 40°C Easy-care fabrics made ofcotton, l inen,
synthetic fibres or blen ded fabrics Rinse stop; short programme, approx. 15 minutes, su itable for lightly soiled washing
ZSports, Fitness – – ... 40 ° C Fabrics made from microfibre SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus , Rinse
Plus 2, stain selection [, Rinse stop ;do not treat lau ndry with fabric softener
Additional programmes Rinse,Spin, >Empty

8
Safety instructions
– Read the Instruction manua l and Installation instructions and all other information enclosedwith thewas hing
machine and act accordingly.
– Retain the documents for subs equent use.
Risk of electric shock – Never pull the ca ble to disconnect the mains plug
– Only insert/pull out the mains plug withdry hands.
Danger to life For appliances that have reached the end of their service life:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing ma chine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts o ut of the reach of children.
Risk of poisoning – Keep detergents and care pr oducts out of the reach of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing so lvents, e.g. stain
remover/cleaning solvent may cause an explosion after being load ed into the
washing machine.
Rinse items of laundry thoroughly by hand before hand.
Risk of injury – The washing machin e door can become very hot.
– Be careful when draining hot det ergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values
Programme Option Load Electricity
consumption*** Water*** Programme
duration***
LFCottons 30 °C** 8 kg 0.35 kWh 57 l 2:06 h
LFCottons 40 °C** 8 kg 0.97 kWh 57 l 2:16 h
LFCottons 60 °C** 8 kg 1.36 kWh 57 l 2:26 h
LFCottons 60 °C EcoPerfect j*8 kg 1.03 kWh 56 l 3:25 h
LFCottons 90 °C 8 kg 2.34 kWh 68 l 2:16 h
Easy-Care 40 °C** 3.5 kg 0.55 kWh 41 l 1:35 h
1Mix 40 °C** 3.5 kg 0.47 kWh 37 l 0:53 h
Delicate/Silk – – (cold) 2 kg 0.04 kWh 35 l 0:41 h
Delicate/Silk 30 °C 2 kg 0.14 kWh 35 l 0:41 h
O:W ool – – (cold) 2 kg 0.06 kWh 40 l 0:40 h
O:W ool 30 °C 2 kg 0.16 kWh 40 l 0:40 h
* Programme settingfo r testing and energy labelling in accordance with EU Directive 92/75/EEC.
** Progra mme setting for testing in accordance with applicable standard EN60456.
Note on comparative tests: When testing the test programm es, wash the specified load using the maximum spin speed.
As a short pro gramme for coloureds, select the programme 1Mix4 0 °C and the maximum spin speed.
*** The values deviate from the indicated values depend ing on water pressure, water hardness, and water inlet t emperature,
ambient temperature, type, amount and so iling of the laundry, detergent used, fluctuation s in the power supply and selected
additional functions.
9
Important information
Before washing for the first time
Do not put any laundry in the machine. Turn the tap on. Pour into compartment II:
–approx. 1 litre water
– detergent (dosage according to themanufac turer's instructions for light soiling and accordi ng to water hardness)
Set progra mme selector to Easy-Care 60 °C and press $Start/Reload.
At the end of theprogramme, turnthe programme selector to Off.
Protecting the laundry and the machine
– When determining the dosage of all washing powders,a dditives and cleaning agents, you must follow the
manufacturer's instructions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains ,un derwired bras).
– Fasten zips, do up any button s.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Load laundry
–For optimum spin behaviour, load large and small items of laundry together.
– Individual items may lead toconside rable imbalances.
–Take care not to trap items of laundry between the washing mach ine door and the rubber seal.
Soaking Load laundry of the same colour.
–Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions.
–Turn the programme selector to LFCottons 30 °C and press $Start/Reload .
–After approx. 10 minutes, press $Start/Reload to stop th e programme.
–Once the required soaking time has elapsed, press $Start/Reload ag ain to continue the pro-gramme, or select a
different programme.
Starching Laundry must not be treated with fabricsoften er
Starching is possible in all wash programmes if liquid starch i s used. Pour starch into the ~fabric softener c om-
partment in accordance with the manufacturer's instructions (ri nse first if necessary).
Dyeing / bleaching
Dye should only be used in normal household quantities. Salt may da mage stainless steel. Always follow the dye
manufacturer's instructions. Do not use the washing machine for bleaching clothes.
Down Laundry must not be treated with fa bric softener.
Only wash down-filled clothing, not feather cushions or bedding. Wash large items se parately. Be sparing with washing
detergent. Dry laundry in the tumble dryer afterwards to prevent the down from clumping.
Load display
The load sensor detects how heavily the washing machine isloaded. Th e laundry is not weighed.
Recommended dosage
Based on the selected programme and the detected load, the rec ommended dosage function provides a recommen-
dation for the detergent dosage in % . The % figure refers to the recommendation of the detergentmanufa cturer.
Load adjust
Independently of the load display, the au tomatic load sensing function uses additional se nsors to adapt the water and
power consumption ideally to each programme, depending on the type of fabric and the load.
10
Insert for liquid detergent mo del-dependent
Position the insert for dispensing liquid detergent:
–Remove the detergent drawer completely apage 10.
– Slide the insert forwards.
Do not use the insert (slide upwards):
– for gel detergents and washing powder
–for programmes with the Prewash and end timeopti ons.
Care
ʑMachine housing, control panel
– Remove detergent residue immediatel y.
– Wipe with a soft, damp cloth.
– Do not clean with a jet o f water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer co mpletely.
2. To remove the insert: press the insert upwa rds from below with your finger.
3. Clean the detergent dispenser tray andinsert wi th water and a brush and
dry it.
4. Fit the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can e vaporate.
ʑDrum
Use chlorine-free cleaning agent, not steel w ool.
ʑDescaling No laundry in the machine.
This should not be necessary if the detergent is measur ed out correctly. If it does become necessary, however,
proceed according to the descaling agent manufacturer' sins tructions. Suitable descalers can be obtained via our
website or from our after-sales service (page 13).
Information on the display panel dep ending on model
Door open? Close the washing machine door properly; laundry may be caught.
Tap closed? Open the tap completely, supply hose kinked or trapped; Clean thefilter apage 11,
water pressure too low.
Pump blocked? Detergent solution pump blocked; Clean the detergent solution pump apage 11.
Drainage hose/waste pipe blocked; Clean the drainageho se at the siphon apage 11.
Pause Top-up not poss.;
water level too high oder
Temperature too high
Not possible to add more laundry.
To continue, press the $Start/Reload but ton.
F: 23 Water in the base tub, appliance leaking.Call t he after-sales service.
F: 34 Washing machine door cannot be locked . Open the washing machine door and close it so
that you hear it "click"; switch the applianc e off and on again; set the programme and make
your settings; start the programme.
Other displays Switch off the appliance, wait for 5 seconds and switch it back on. If the display appears
again, call the after-sales serv ice apage 13.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No so lvents.
11
Information about blockages
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. Take the drainage hose out of the reta iner.
Remove the sealing cap, allow the detergent solution to flow out.
Push the sealing cap back on.
3. Unscrew the pump cover carefully (residua l water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergen t
solution pump must be able to rotate).
5. Replace the pump cover and screw it on tightly.The ha ndle points upright. Replace the
drainage hose in the holder.
6. Refit the service flap and close it.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 1 litre of water into compartment II and startthe >Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, remove the drain age hose carefully (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and s ecure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock
Do not immerse the Aqua-Stop safety dev ice in water (it contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Spin/>Empty).
3. Press $Start/Reload. Let the programme run fo r
approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose from the rear of the app liance.
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
–Risk of scalding.
Allow the detergent solution to cool do wn.
– Turn off the tap.
12
What to do if...
ʑ...Water is escaping: – Attach/replace the drainage hose correctl y.
– Tighten the screw connection ofthe sup ply hose.
ʑ...No water is entering the drum: –$Start/Reload no t selected?
– Tap not turned on?
–Filter blocked? Clean the filter apage 11.
– Supply hose kinked or t rapped?
ʑ...Washing machine door cannot
be opened:
–Safety function active. Programme stopped? apage4.
–Rinse stop (n o final spin) selected? apage 3, 4.
–Can be opened by emergency release only? apage 13.
ʑ...Programme does not start: –$Start/Reloador end time selected?
– Washing machine door closed?
–Childproof lock active? Deactivate apage 5.
ʑ...Detergent solution
does not empty.
–Rinse stop (n o final spin) selected? apage 3, 4.
–Clean the detergent solution pump apage 11.
– Clean the waste pipe and/or drainage hose.
ʑ...Water not visible in the drum: – Not a fault - water below the visible are a.
ʑ...Spin result not satisfactory.
Laundry wet/too damp:
– Not a fault - the unbalanced-load detection sy stem interrupted spinning, uneven
laundry distribution.
Distribute large and small items of laundry evenly in the drum.
–Easy-iron Sselected? apage 5.
–Speed selected too low? apage 5.
ʑ...The programme duration
changes during the washing
cycle:
–Not a fault - the programme sequence is optimised for the relevant washing
process. This can cause changes in th e programme duration in the display panel.
ʑ...Spinning is restarted several
times:
– Not a fault - unbalanced-load detection system is adjustin gthe imbalance.
ʑ...Residual water in the ~com-
partment for care products:
– Not a fault - the action of the care product is not affected.
–Clean the insert if necessary apage 10.
ʑ...Odours build up in the
washing machine:
–Run the LFCottons 90 °C prog ramme without laundry.
Use standard detergent.
ʑ...The³3status display
lights up:
Foam may be escaping from the
detergent drawer:
–Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour into
compartment II (not for outdoor or down fabrics).
– Reduce the detergent dosage fo r the next wash cycle.
ʑ...Loud spinning, vibrations and
“walking” during the spin cycle:
–Are the appliance feet fixed?
Secure appliance feet aInstallation instructi ons.
–Transportation safety devices removed?
Remove transportation safety devices aInstallation instru ctions.
ʑ...Noises emitted during
spinning and emptying:
– Clean the detergent solution pump apage 11.
ʑ...Display panel/indicator lamps
do not function during
operation:
– Power cut?
– Circuit breakers tripped or fu ses blown? Reset the circuit breakers or
change the fuses.
– Energy saving mode active? apage 1.
– If the fault occurs repeatedl y, call the after-sales service.
ʑ...Programme sequence longer
than usual:
– Not a fault - unbalanced-load detection system is adjustin gthe imbalance by
repeatedly redistributing the laundry.
– Not a fault - foam detection system active - several rinse cy cles are added.
13
What to do if ...
ʑ...There is detergent residue
on the laundry:
– Occasionally, phosphate-free deterg ents contain water-insoluble residues.
–Select theRinse programme or brush out the laundry after washing.
– Use liquid detergent
ʑ...in Reload mode, $Start/
Reload flashes very quickly and
an audible signal sounds:
– Water level too high. Close t he washing machine door immediately.
– To continue, press the $S tart/Reload button.
If you cannot correct a fault yourself (switching on/off) or a r epair is required:
–Turn the programme selector to Off and remove the mains plug from the so cket.
–Turn off the tap and call the after -sales service apage 13.
Emergency release e.g. in the event of a power cut
The programme continues when the power supply is restored. H owever, if the laundry has to be removed, the washing
machine door can be opened as follows:
Risk of scalding
The detergent solution and laundry may be hot. If possible, leave to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 11.
3. Pull the emergency release downward s with a tool and release.
Washing machine door can then be opened.
After-sales service
ʑIf you cannot remedy the fault yourself (What to do if ..., apage 12 , 13),contact our after-sales service.
We will always find a suitable solutio n to avoid unnecessary visits by repair personnel.
ʑThe contact details of your nearest after-sales service can be found here or in the after-sales service directory
(model-dependent).
-GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 p ence)
-IE 01450 2655
ʑPlease give the after-sales service the p roduct number (E-Nr.) and the production (FD) number of the appliance.
Product number Production number
This information can be found:
on the inside of the washing machin e door*/opened service
flap* and rear of the appliance.
*model-dependent
ʑTrust the manufacturer's competen ce. Turn to us.
You will thereby ensure that the repairs are performed b y trained service personnel equipped with original repair parts.
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and the separate installation instructions before
operating the washing machine.

1 2
a>$a$>$$a$$aa
Programme selectorDisplay panel/
options buttons /change buttons
ʑʑʑʑ$$
Insert for liquid detergent (depending on model), apage 10
Compartment II:detergent for main wash,
water softener, bleach, stain remover
Your washing machine
Congratulations äyou have chosen a modern, high-quality domestic appliance
manufactured by Bosch. A distinctive feature of the washing machine is its economical
water and energy consumption.
Each machine that leaves our factory is inspected thoroughly to ensure that it functions
properly and is in perfect condition.
For more information on our products, accessories, replacement parts and services, see
our website www.bosch-home.com or contact our after-sales service centres.
Intended use
Contents Page
ʔIntended use ..........................................................................................................................1
ʔProgrammes ..........................................................................................................................1
ʔSetting and adjusting the programme .............................................................................3
ʔWashing ............................................................................................................................. 3/4
ʔAfter washing .........................................................................................................................4
ʔIndividual settings ............................................................................................................ 5/6
ʔOverview of programmes ....................................................................................................7
ʔSafety instructions ................................................................................................................8
ʔConsumption values .............................................................................................................8
ʔImportant information ..........................................................................................................9
ʔInsert for liquid detergent ................................................................................................ 10
ʔCare ....................................................................................................................................... 10
ʔInformation on the display panel .................................................................................... 10
ʔInformation about blockages .......................................................................................... 11
ʔWhat to do if... ...............................................................................................................12/13
ʔEmergency release ............................................................................................................ 13
ʔAfter-sales service .............................................................................................................. 13
Environmental protection / Conservation tips
– Always fill the washing machine with a maximum amount of laundry for the relevant
programme.
– Wash laundry with normal soiling without a pre-wash.
–Instead of LFCottons 90 °C,select the LFCottons 60 °C programme and
the jEcoPerfect additional function. Comparable cleaning result with
significantly lower energy consumption.
– Measure the detergent according to the manufacturer's instructions and water
hardness.
–Energy saving mode:The display panel lighting goes out after a few minutes;
$Start/Reload flashes. Press any button to turn the light back on.
–If the laundry is then to be dried in the tumble dryer, select the appropriate spin
speed according to the instructions from the dryer manufacturer.
Automatic stain removal
Automatic treatment of 16 different types of stain possible. No pretreatment of stains
required - the washing machine automatically adapts the washing process apage 6.
Preparation Before the first wash
Run a wash cycle without laundry aPage 9
Compartment ~:fabric softener, starch
Compartment I:Detergent for pre-wash
ʔFor domestic use only
ʔFor machine-washable fabrics and hand-washable wool in detergent
solution
ʋTo be operated with cold drinking water and commercially-available
detergents and care products that are suitable for use in washing
machines.
– Do not leave children unattended near the washing machine.
– The washing machine is not to be used by children or persons
not familiar with the operating instructions.
–Keep pets away from the washing machine. ~Install correctly, according to the separate
Installation instructions.
Check the machine
– Never use a damaged machine.
– Inform the after-sales service.
Connect the mains plug
Make sure your hands are dry.
Take hold of the plug only.
Turn the tap on aʑijacS3ääääääää2[aʑ#Ù#Ù#3
Ù
aa
– –, 20° - 90° °C ÔÈSet the temperature (– – = cold)
0, 400 - 1600* ÔÈSet the spin speed
(* model-dependent) (0 = no spin during the
programme sequence)
All buttons are sensitive and need only
to be touched lightly.
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be turned
in either direction
aaa
Programmes
Detailed overview of programmes apage 7.
Temperature and spin speed can be selected individually,
depending on the selected programme and programme progress.
LFCottons Hard-wearing fabrics
Easy-Care Easy-care fabrics
1Mix Different types of laundry
Delicate/Silk Delicate washable fabrics
O:Wool Hand/machine-washable wool
Rinse Extra rinse with spin
Spin Extra spin with selectable spin speed
>Empty Empty the rinsing water with
Rinse stop (no final spin)
6SuperQuick 15’ Extra short programme
VSensitive Hard-wearing fabrics; longer washing and addi-
tional rinsing for particularly sensitive skin
ZSports, Fitness Fabrics made from microfibre, do not treat laundry
with fabric softener
Shirt/Blouse Non-iron shirts
PCurtains Curtains programme
V+ Sensitive Plus washable fabrics filled with down apage 9
Dark Wash Bed linen or dark-coloured fabrics $
ai1LFijS2[VijS2[ijS2[1ijS2[ijS2[Pij2[ijS2[Vij2aijS2[O:6ZijS2[>

3 4
Switching off
Turn the programme selector to Off.
Turning off the tap
Not required for AquaStop models aInstallation instructions,
page 7.
Removing the washing
Open the washing machine door and remove the washing.
If Rinse stop (no final spin) is active: turn the programme selector
to >Empty or Spin. Select the spin speed if necessary.
Press $Start/Reload.
– Remove any foreign objects - risk of rusting.
–Leave the washing machine door and detergent drawer
open so that any residual water can dry.
Programme finished when ...
... finished, Remove washing appears on the display panel.
If the display panel lighting is off,press any button
aEnergy saving mode, page 1.
Cancelling the programme
Programmes at high temperatures
–Cool laundry: Select Rinse.
–Select $Start/Reload.
Programmes at lower temperatures:
–Select Spin or >Empty.
–Select $Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
–Press $Start/Reload. The new programme starts from the
beginning.
Adding laundry, if ...apage 6
... $Start/Reload is selected and Top-up possible appears on the
display panel.
– Do not leave the washing machine door open for too long as
water from the washing could leak out.
–Load display not active when reloading.
Select $Start/Reload.
Sorting the laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7.
Observe the important information apage 9.
Detergents and care products
Measure accordingly:
Amount of laundry, level of soiling, water hardness (ask your water supply company) and
manufacturer's instructions.
Models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
During operation: Open the detergent drawer with care.
Programme selector Start /
Reload
ʑʑʑʑ$$
aäʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔLFLFj$aaPage 9
Open the door / set the programme* 1
Washing
~ʔʔʋ
Detergent drawer
with compartments I, II, ~Control panel
Washing machine door
handle
Service flap
Washing machine door
*If the childlock is active aDeactivate, page 5.
Follow the instructions in the display panel.
Washing
ʑijacS3ääääääää2[aʑ#Ù#Ù#3
Ù
6
Load indicator/
recommended dosage
To activate, first open the door, set the programme and
then load the items of laundry.
Load laundry
Observe the load display on the
display panel apage 9
Close the washing
machine door
Dilute thick fabric softener and care products with water.
This prevents blockages.
Add detergent and
care products
Observe the dosage
recommendation for detergent on the
display panel apage 9
2
3
4Drum interior light
(depending on model) comes on
when the door is opened or closed,
or when a programme is started;
goes out automatically.
ÔÈÔÈProgramme selector for
switching the machine on
and off and for selecting the
programme. Can be turned
in either direction.
Selecting individual settings a page 5.
Select stain a page 6.
Setting the temperature / spin speed
a page 2.
5
aLF1O:>6VZPVaSelect $Start/Reload
ai1LFijS2[VijS2[ijS2[1ijS2[ijS2[Pij2[ijS2[Vij2aijS2[O:6ZijS2[>

5 6
a>$a$>$$a$$aaIndividual settings
Select stain
The correct treatment for every stain
Do not let stains dry. Remove any solid residue beforehand. Sort items of laundry as usual and load the washing
machine. Select a type of stain (cannot be combined).
ʑA total of 16 different stains can be selected. The washing machine adjusts the washing temperature, drum movement
and soaking time to suit the type of stain. Hot or cold water, gentle or intensive washing control (thanks to the new
drum structure) and a long or short soaking time ensure that the wash programme has a special sequence for each
type of stain.
ʑUsing the Options button, selectSelect stain; change with the Change /buttons;
select a stain.
ʑStains
baby food
blood
bott. sock. dirt
butter/edi. oil
chocolate
coffee
cosmetics
egg
grass
orange
red wine stain
soil and sand
strawberry
sweat
tea
tomato
ʑStain treatment in detail - 2 examples
egg Soaked in lukewarm water, selected wash cycle with a higher water level and
additional rinse cycles to remove particles
blood Blood is first “loosened” in cold water, then the selected wash programme
starts.
For the other types of stain, we have formulated comparable solutions in our intensive studies.
Start / Reload
If you want to add additional items of laundry after the programme has started, choose $Start/Reload. The
machine checks whether topping up laundry is possible. Follow the instructions in the display panel.
For safety reasons, the washing machine door remains locked when the water level and/or temperature is high, or
while the drum is rotating.
To continue the programme, press the $Start/Reload button.
aäʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔLFLFj$aa~ʔʔʋ~aIndividual settings
ʑOptions see also the Overview of programmes
VarioPerfect*
SpeedPerfect i- Standard -
EcoPerfect jSpeedPerfect:For washing in a shorter time with a washing outcome
comparable to that of the standard programme. Maximum load
aOverview of programmes, page 7.
EcoPerfect:For saving energy with a washing performance comparable to
that of the standard programme.
end time*When you select the programme, the respective time to the end of the pro-
gramme is displayed. It can be adjusted to a maximum of 24 hours in 1-hour
increments. Press the Change /button repeatedly until the required
number of hours is displayed (h=hour). It is not possible to make adjustments
once the programme has started.
Prewashcoff - on For heavily soiled items. Prewash at max. 30 °C.
SEasy-iron
off - on
Special spin sequence with subsequent fluffing. Gentle final spin at reduced
speed. Residual moisture in the laundry is increased slightly.
3Signal*Select the volume of the information signals.
off äquiet ämedium äloud ävery loud
button signal*Select the volume of the button signals.
off äquiet ämedium äloud ävery loud
language*Select the language of the display texts.
Water Plus
off - on
Increased water level. Gentler treatment of the laundry.
Rinse stop
off - on
After the final rinse, the laundry remains in the water.
2Rinse Plus*
max. +3 Rinse cycles
Extra rinse. Prolonged programme duration. Recommended use: for
particularly sensitive skin and/or in areas with very soft water.
[stain selection*Automatic treatment of tough stains aPage 6.
ʑDisplay symbols
Childproof lock/appliance lock
off - on #You can lock the washing machine to prevent the functions you have set from
being changed inadvertently.
To activate: Press and hold the ÙOptions button for 5 seconds.
The #symbol lights up.
To deactivate: Press and hold the ÙOptions button for 5 seconds.
– If the programme selector is adjusted after the appliance has started:
The #symbol flashes. First, reset the programme selector to the
original programme, then deactivate.
– The childlock can remain activated until you start the next programme, even
after the machine has been switched off (the name of the last programme
run appears on the display panel).
Then you can deactivate the childlock again before starting the programme
and activate it again as necessary once the programme has started.
3Foam detection Too much foam in the washing machine. Foam detection system active -
special programme sequence to reduce foam.
Select options Ù/Information on programme
sequence; with progress or
load bar, as appropriate
Change settings /available depending on the
selected programme
*If the buttons are held for longer,
the appliance automatically scrolls
through the subsequent setting
options
aaÔÈÔÈ
aaa
aLF1O:>6VZPVa$
ai1LFijS2[VijS2[ijS2[1ijS2[ijS2[Pij2[ijS2[Vij2aijS2[O:6ZijS2[>

a>$a$>$$a$$aaʑʑʑʑ$$
aäʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔʔLFLFj$aa~ʔʔʋ~aʑijacS3ääääääää2[aʑ#Ù#Ù#3ÙaaÔÈÔÈ
aaa
aLF1O:>6VZPVa$
7
0810 / 9000587246 *587246* WAS32798ME
WAS32745ME
WAS32795GC
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
Overview of programmes atable of consumption values on page 8 and instructions on page 9.
*reduced load for SpeedPerfect ioption
1Mix 40 °C with maximum spin speed is ideal as a short programme.
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the detergent between compartments Iand II.
Programmes °C
(– – = cold) max. Type of laundry Options; notes
LFCottons – – ... 90 °C
8 kg/ 5 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen
SpeedPerfect i*, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Rinse stop VSensitive – – ... 60 °C Hard-wearing fabrics made of cotton or linen
SpeedPerfect i*, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Rinse stop ;for particularly sensitive skin, longer
wash cycle at selected temperature, higher water level, additional rinse cycle
Easy-Care – – ... 60 °C
3.5 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics
SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Rinse stop 1Mix – – ... 40 °C Fabrics made of cotton and easy-care fabrics
SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Rinse stop ;
different types of laundry can be washed together
Dark Wash – – ... 40 °C Delicate bed linen or dark-coloured fabrics
made of cotton and dark easy-care fabrics
SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Rinse stop ;reduced rinse + spin and final spin
PCurtains – – ... 40 °C curtains weighing 3.5 kg, or light curtains
measuring 25 - 30 m²
SpeedPerfect i, EcoPerfect j, Water Plus , Rinse Plus 2, stain selection [,
Rinse stop ; reduced rinse + spin and final spin
Shirt/Blouse – – ... 60 °C
2 kg
Non-iron shirts made of cotton, linen, syn- thetic fibres or blended fabrics
SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus , Rinse
Plus 2, stain selection [, Rinse stop ; gentle spin only, hang up dripping wet
V+ Sensitive Plus – – ... 60 °C machine-washable fabrics filled with down
(no cushions or bedding)
SpeedPerfect i, EcoPerfect j,Water Plus , Rinse Plus 2, Rinse stop ;
wash large items separately, be sparing with washing detergent apage 9
Delicate/Silk – – ... 40 °C
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains)
SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus ,
Rinse Plus 2, stain selection [, Rinse stop ;
gentle spin between the rinse cycles only
O:Wool – – ... 40 °C Hand or machine-washable fabrics made of
wool or containing wool
Rinse stop; particularly gentle wash programme to prevent shrinkage of laun-dry, longer breaks during the programme (fabrics rest in the detergent solution)
6SuperQuick 15’ – – ... 40 °C Easy-care fabrics made of cotton, linen,
synthetic fibres or blended fabrics Rinse stop; short programme, approx. 15 minutes, suitable for lightly soiled washing
ZSports, Fitness – – ... 40 °C Fabrics made from microfibre SpeedPerfect i, EcoPerfect j,Prewash , Easy-iron S, Water Plus , Rinse
Plus 2, stain selection [, Rinse stop ;do not treat laundry with fabric softener
Additional programmes Rinse,Spin, >Empty

8
Safety instructions
– Read the Instruction manual and Installation instructions and all other information enclosed with the washing
machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug
– Only insert/pull out the mains plug with dry hands.
Danger to life For appliances that have reached the end of their service life:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may cause an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values
Programme Option Load Electricity
consumption*** Water*** Programme duration***
LFCottons 30 °C** 8 kg 0.35 kWh 57 l 2:06 h
LFCottons 40 °C** 8 kg 0.97 kWh 57 l 2:16 h
LFCottons 60 °C** 8 kg 1.36 kWh 57 l 2:26 h
LFCottons 60 °C EcoPerfect j*8 kg 1.03 kWh 56 l 3:25 h
LFCottons 90 °C 8 kg 2.34 kWh 68 l 2:16 h
Easy-Care 40 °C** 3.5 kg 0.55 kWh 41 l 1:35 h
1Mix 40 °C** 3.5 kg 0.47 kWh 37 l 0:53 h
Delicate/Silk – – (cold) 2 kg 0.04 kWh 35 l 0:41 h
Delicate/Silk 30 °C 2 kg 0.14 kWh 35 l 0:41 h
O:Wool – – (cold) 2 kg 0.06 kWh 40 l 0:40 h
O:Wool 30 °C 2 kg 0.16 kWh 40 l 0:40 h
* Programme setting for testing and energy labelling in accordance with EU Directive 92/75/EEC.
** Programme setting for testing in accordance with applicable standard EN60456.
Note on comparative tests: When testing the test programmes, wash the specified load using the maximum spin speed.
As a short programme for coloureds, select the programme 1Mix 40 °C and the maximum spin speed.
*** The values deviate from the indicated values depending on water pressure, water hardness, and water inlet temperature,
ambient temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected
additional functions.
9
Important information
Before washing for the first time
Do not put any laundry in the machine. Turn the tap on. Pour into compartment II:
–approx. 1 litre water
– detergent (dosage according to the manufacturer's instructions for light soiling and according to water hardness)
Set programme selector to Easy-Care 60 °C and press $Start/Reload.
At the end of the programme, turn the programme selector to Off.
Protecting the laundry and the machine
– When determining the dosage of all washing powders, additives and cleaning agents, you must follow the
manufacturer's instructions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Load laundry
–For optimum spin behaviour, load large and small items of laundry together.
– Individual items may lead to considerable imbalances.
–Take care not to trap items of laundry between the washing machine door and the rubber seal.
Soaking Load laundry of the same colour.
–Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions.
–Turn the programme selector to LFCottons 30 °C and press $Start/Reload.
–After approx. 10 minutes, press $Start/Reload to stop the programme.
–Once the required soaking time has elapsed, press $Start/Reload again to continue the pro-gramme, or select a
different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour starch into the ~fabric softener com-
partment in accordance with the manufacturer's instructions (rinse first if necessary).
Dyeing / bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye
manufacturer's instructions. Do not use the washing machine for bleaching clothes.
Down Laundry must not be treated with fabric softener.
Only wash down-filled clothing, not feather cushions or bedding. Wash large items separately. Be sparing with washing
detergent. Dry laundry in the tumble dryer afterwards to prevent the down from clumping.
Load display
The load sensor detects how heavily the washing machine is loaded. The laundry is not weighed.
Recommended dosage
Based on the selected programme and the detected load, the recommended dosage function provides a recommen-
dation for the detergent dosage in %. The % figure refers to the recommendation of the detergent manufacturer.
Load adjust
Independently of the load display, the automatic load sensing function uses additional sensors to adapt the water and
power consumption ideally to each programme, depending on the type of fabric and the load.
aʑʑʑaaa$a
>>$ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑ~aʑLFʑ³3ʑaaʑaʑaʑʑʑ$$aaʑaʑʑʑ

LFLFLFLFjLF1O:O:1$LF$$$~
10
Insert for liquid detergent model-dependent
Position the insert for dispensing liquid detergent:
–Remove the detergent drawer completely apage 10.
– Slide the insert forwards.
Do not use the insert (slide upwards):
– for gel detergents and washing powder
–for programmes with the Prewash and end time options.
Care
ʑMachine housing, control panel
– Remove detergent residue immediately.
– Wipe with a soft, damp cloth.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and
dry it.
4. Fit the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
ʑDrum
Use chlorine-free cleaning agent, not steel wool.
ʑDescaling No laundry in the machine.
This should not be necessary if the detergent is measured out correctly. If it does become necessary, however,
proceed according to the descaling agent manufacturer's instructions. Suitable descalers can be obtained via our
website or from our after-sales service (page 13).
Information on the display panel depending on model
Door open? Close the washing machine door properly; laundry may be caught.
Tap closed? Open the tap completely, supply hose kinked or trapped; Clean the filter apage 11,
water pressure too low.
Pump blocked? Detergent solution pump blocked; Clean the detergent solution pump apage 11.
Drainage hose/waste pipe blocked; Clean the drainage hose at the siphon apage 11.
Pause Top-up not poss.;
water level too high oder
Temperature too high
Not possible to add more laundry.
To continue, press the $Start/Reload button.
F: 23 Water in the base tub, appliance leaking. Call the after-sales service.
F: 34 Washing machine door cannot be locked. Open the washing machine door and close it so
that you hear it "click"; switch the appliance off and on again; set the programme and make
your settings; start the programme.
Other displays Switch off the appliance, wait for 5 seconds and switch it back on. If the display appears
again, call the after-sales service apage 13.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No solvents.
11
Information about blockages
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. Take the drainage hose out of the retainer.
Remove the sealing cap, allow the detergent solution to flow out.
Push the sealing cap back on.
3. Unscrew the pump cover carefully (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must be able to rotate).
5. Replace the pump cover and screw it on tightly. The handle points upright. Replace the
drainage hose in the holder.
6. Refit the service flap and close it.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 1 litre of water into compartment II and start the >Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, remove the drainage hose carefully (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock
Do not immerse the Aqua-Stop safety device in water (it contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Spin/>Empty).
3. Press $Start/Reload. Let the programme run for
approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose from the rear of the appliance.
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
–Risk of scalding.
Allow the detergent solution to cool down.
– Turn off the tap.
ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑ~aʑLFʑ³3ʑaaʑaʑaʑ
ʑʑ$$aaʑaʑʑʑ

LFLFLFLFjLF1O:O:1$LF$$$~aʑʑʑaaa$a>>$
12
What to do if...
ʑ...Water is escaping: – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑ...No water is entering the drum: –$Start/Reload not selected?
– Tap not turned on?
–Filter blocked? Clean the filter apage 11.
– Supply hose kinked or trapped?
ʑ...Washing machine door cannot
be opened:
–Safety function active. Programme stopped? apage 4.
–Rinse stop (no final spin) selected? apage 3,4.
–Can be opened by emergency release only? apage 13.
ʑ...Programme does not start: –$Start/Reload or end time selected?
– Washing machine door closed?
–Childproof lock active? Deactivate apage 5.
ʑ...Detergent solution
does not empty.
–Rinse stop (no final spin) selected? apage 3,4.
–Clean the detergent solution pump apage 11.
– Clean the waste pipe and/or drainage hose.
ʑ...Water not visible in the drum: – Not a fault - water below the visible area.
ʑ...Spin result not satisfactory.
Laundry wet/too damp:
– Not a fault - the unbalanced-load detection system interrupted spinning, uneven
laundry distribution.
Distribute large and small items of laundry evenly in the drum.
–Easy-iron Sselected? apage 5.
–Speed selected too low? apage 5.
ʑ...The programme duration
changes during the washing
cycle:
–Not a fault - the programme sequence is optimised for the relevant washing
process. This can cause changes in the programme duration in the display panel.
ʑ...Spinning is restarted several
times:
– Not a fault - unbalanced-load detection system is adjusting the imbalance.
ʑ...Residual water in the ~com-
partment for care products:
– Not a fault - the action of the care product is not affected.
–Clean the insert if necessary apage 10.
ʑ...Odours build up in the
washing machine:
–Run the LFCottons 90 °C programme without laundry.
Use standard detergent.
ʑ...The³3status display
lights up:
Foam may be escaping from the
detergent drawer:
–Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour into
compartment II (not for outdoor or down fabrics).
– Reduce the detergent dosage for the next wash cycle.
ʑ...Loud spinning, vibrations and
“walking” during the spin cycle:
–Are the appliance feet fixed?
Secure appliance feet aInstallation instructions.
–Transportation safety devices removed?
Remove transportation safety devices aInstallation instructions.
ʑ...Noises emitted during
spinning and emptying:
– Clean the detergent solution pump apage 11.
ʑ...Display panel/indicator lamps
do not function during
operation:
– Power cut?
– Circuit breakers tripped or fuses blown? Reset the circuit breakers or
change the fuses.
– Energy saving mode active? apage 1.
– If the fault occurs repeatedly, call the after-sales service.
ʑ...Programme sequence longer
than usual:
– Not a fault - unbalanced-load detection system is adjusting the imbalance by
repeatedly redistributing the laundry.
– Not a fault - foam detection system active - several rinse cycles are added.
13
What to do if ...
ʑ...There is detergent residue
on the laundry:
– Occasionally, phosphate-free detergents contain water-insoluble residues.
–Select theRinse programme or brush out the laundry after washing.
– Use liquid detergent
ʑ...in Reload mode, $Start/
Reload flashes very quickly and
an audible signal sounds:
– Water level too high. Close the washing machine door immediately.
– To continue, press the $Start/Reload button.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
–Turn the programme selector to Off and remove the mains plug from the socket.
–Turn off the tap and call the after-sales service apage 13.
Emergency release e.g. in the event of a power cut
The programme continues when the power supply is restored. However, if the laundry has to be removed, the washing
machine door can be opened as follows:
Risk of scalding
The detergent solution and laundry may be hot. If possible, leave to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 11.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
After-sales service
ʑIf you cannot remedy the fault yourself (What to do if ..., apage 12, 13),contact our after-sales service.
We will always find a suitable solution to avoid unnecessary visits by repair personnel.
ʑThe contact details of your nearest after-sales service can be found here or in the after-sales service directory
(model-dependent).
-GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence)
-IE 01450 2655
ʑPlease give the after-sales service the product number (E-Nr.) and the production (FD) number of the appliance.
Product number Production number
This information can be found:
on the inside of the washing machine door*/opened service
flap* and rear of the appliance.
*model-dependent
ʑTrust the manufacturer's competence. Turn to us.
You will thereby ensure that the repairs are performed by trained service personnel equipped with original repair parts.

LFLFLFLFjLF1O:O:1$LF$$$~aʑʑʑaaa$a>>$ʑʑ$aʑaaaʑ$aʑaaʑʑSaaʑʑʑ~aʑLFʑ³3ʑaaʑaʑaʑʑʑ$$aaʑaʑʑʑ
Instruction manual
Washing machine
en
Observe the safety instructions on page 8.
Read these instructions and the separate installation instructions before
operating the washing machine.