Bose CineMate 120 User manual

®
CineMate ®120
home theater system
OwneCsQud_,',_/ Qua d_,',_usuao / I,l I:c_,',_d_£ saton

Important Safety Information
Please read this owner's guide carefully and save it for future reference.
Thelightningflashwith arrowheadsymbolwithinanequilateraltrianglealertstheuser tothepresenceof
uninsulated,dangerousvoltagewithinthesystemenclosurethat maybeofsufficientmagnitudeto
constitutea riskof electricshock.
Theexclamationpointwithinanequilateraltrianglealertstheusertothepresenceofimportantoperating
andmaintenanceinstructionsintheowner'sguide.
WARNINGS:
.Toreducethe riskoffireorelectricshock,donotexposethisproducttorainor moisture.
.Donotexposethisapparatustodrippingorsplashing,anddo notplaceobjectsfilledwith liquids,suchas
vases,on or neartheapparatus.Aswith anyelectronicproducts,usecare nottospill liquidsintoany part
ofthe product.Exposureto liquidsmaycreateafailureand/orfire hazard.
.Replaceonlywith aAA (lEOLR06)alkalinebattery(or batteries).
.Donotplacenakedflamesources,suchaslightedcandles,onor neartheproduct.
CAUTIONS:
.Donotmakeunauthorizedalterationstotheproduct;doingsomaycompromisesafety,regulatory
compliance,systemperformance,andmayvoidthewarranty.
.Long-termexposureto loudmusicmaycausehearingdamage.Itis besttoavoid extremevolumewhen
usingheadphones,especiallyforextendedperiods.
QWARNING:
Containssmallpartswhichmaybea chokinghazard.Notsuitablefor childrenunderage3.
WARNING:
This productcontainsmagneticmaterial.Contactyour physicianif you havequestionson whetherthis
mightaffecttheoperationofyour implantablemedicaldevice.
NOTES:
.The productlabelis locatedon thebottomof theconsole.
.Wherethemainsplugor appliancecoupleris usedasthe disconnectdevice,suchdisconnectdeviceshallremain
readilyoperable.
.This productmustbe usedindoors.It isneitherdesignednortestedfor useoutdoors,in recreationalvehicles,or
on boats.
.The speakerwireand interconnectcablesincludedwiththesystemarenot approvedfor in-wallinstallation.
Pleasecheckyourlocalbuildingcodesforthecorrecttype ofwire andcablerequiredforin-wallinstallation.
_ BoseCorporationherebydeclaresthat thisproductisin compliancewiththe essentialrequirements
andotherrelevantprovisionsof Directive1999/5/ECandallotherapplicableEUdirective
requirements.Thecompletedeclarationofconformitycan befound at: www.Bose.com/compliance
2-English

Important Safety Information
Important Safety Instructions
1. Read these instructions.
2. Keepthese instructions.
3. Heed allwarnings.
4. Follow altinstructions.
5. Do not use this apparatus nearwater.
6. Clean onlywith a dry cloth.
7. Do not blockany ventilation openings. Instaflin accordance with the manufacturer's instructions.
8. Do not install near any heat sources, such as radiators,heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Protectthe power supply or cord from being walked on or pinched, particularly atplugs, convenience receptacles, and the
pointwhere they exit from the apparatus.
10. Only use attachments/accessoriesspecified by the manufacturer.
11. Unplugthis apparatus during lightningstorms or when unused for long periods of time.
12. Refer all servicing toqualified service personnel. Servicing is requiredwhen the apparatus has been damaged in any way:
such as power supply or cord is damaged;liquid has been spilled or objects havefallen into the apparatus; the apparatus
has been exposed to rain or moisture, doesnot operate normally, or has been dropped.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCO Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is noguarantee that interference will not occur in a particular installation, tfthis equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or moreof the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
Changesor modificationsnot expresslyapprovedby BoseCorporationcouldvoidtheuser's authoritytooperate
thisequipment.
Thisdevicecomplieswith part 15of the FCCRulesandIndustryCanadalicense-exemptRSSstandard(s).
Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemay notcauseharmfulinterference,and
(2)this devicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
ThisClass BdigitalapparatuscomplieswithCanadianICES-003.
CANICES-3(a)/NMB-3(a)
Thisdevicecomplieswith FCCand IndustryCanadaRF radiationexposurelimitssetforthfor generalpopulation.
Itmustnot beco-locatedor beoperatinginconjunctionwith anyotherantennasortransmitters.
Thetemperaturerangeofthisproductis32°F(0°C)to 113°F(45°0).
Thissymbolmeanstheproductmustnot bediscardedashouseholdwaste,and should
bedeliveredtoanappropriatecollectionfacilityfor recycling.Properdisposaland
recyclinghelps protectnaturalresources,humanhealthand theenvironment.For more
informationondisposalandrecyclingofthis product,contactyourlocalmunicipality,
disposalservice,ortheshopwhereyou boughtthis product.
English -3

Important Safety Information
Names and Contents of Toxic or Hazardous Substances or Emements
Toxic or Hazardous Substances and Elements
PartName Lead Nercury Cadmium Nexavalent
(Pb) (HS) (Cd) (CR(V{))
PCBs X 0 0 0
Metalparts X 0 0 0
Plasticparts 0 0 0 0
Speakers X 0 0 0
Cables X 0 0 0
Polybrominated
Biphenyl (PBB)
O
O
O
O
O
Poiybrominated
diphenyiether (PBDE}
o
o
o
o
o
O: Indicatesthatthis toxic orhazardoussubstancecontainedin allof thehomogeneousmaterialsforthis part isbelow thelimit
requirementin SJ/T11363-2006.
X: Indicatesthat thistoxic or hazardoussubstancecontainedin at leastone ofthe homogeneousmaterialsusedfor thispart is
abovethe limit requirementin SJ/T 11363-2006.
Please complete and retain for your records:
Serial numbers can be found on the Acoustimass ®module's connector panel and on the
packaging for the remote control.
Module serial number:
Remote serial number:
Console serial number:
Purchase date:
We suggest you keep your receipt with this owner's guide.
Blu-rayDiscTM andBlu-rayTM aretrademarksoftheBlu-rayDiscAssociation.
[]_] DOLBY Manufacturedunderlicensefrom DolbyLaboratories.Dolbyandthedouble-Dsymbolare
trademarksof DolbyLaboratories.
ManufacturedunderlicenseunderU.S. Patent#'s:5,956,674;5,974,380and6,487,535&other
D_,_,s_,_o_,,_worldwidepatentsissued&pending.DTS,theDTSSymbolandDTS+ theDTSSymbolare
registeredtrademarks&theDTSIogosare trademarksof DTS,Inc.Productincludessoftware.@2010DTS,Inc.
AllRightsReserved.
HDMIisa trademarkor registeredtrademarkof HDMILicensingLLCin theUnitedStatesandothercountries.
SoundTouchandthewirelessnotedesignaretrademarksof BoseCorporationinthe U.S.andothercountries.
Wi-Fiis aregisteredmarkof the Wi-FiAlliance.
@2014BoseCorporation.Nopartof thisworkmay bereproduced,modified,distributed,orotherwiseusedwithout
priorwrittenpermission.
4-English

Contents
Introduction
About your CineMate ®120 home theater system .......................................................... 7
System Features ........................................................................................................... 7
Introducin 8 SoundTouch TM from Bose®.................................................................... 7
Unpackin8 the system ......................................................................................................... 8
Placement 8uidelines .......................................................................................................... 9
Sample system placement ......................................................................................... g
Setting Up the Acoustimass ® Module
Attachin 8 the rubber feet to the Acoustimass module ................................................iO
Connectin 8 the Acoustimass module to power ............................................................. i]
Setting Up the Soundbar
Connectin 8 the soundbar ...................................................................................................12
Wall mountin 8 the soundbar .............................................................................................12
Setting Up the Console
Connectin 8 the console to your TV'sHDMI ARCconnector .......................................... 13
TVs without an HDMI ARCconnector ...............................................................................14
Use a secondary connection in the followin 8 confisurations .............................. 14
Connectin 8 the console to other sources ........................................................................ 14
Connectin 8 to non-HDNll compatible sources ................................................................ 15
Audio-only sources ......................................................................................................15
Connectin 8 the console to power ......................................................................................iS
Starting Up the System
Installin 8 the remote control's batteries .........................................................................16
Powerin 8 on the system ......................................................................................................16
Finishing Setup
Checkin 8 for sound ............................................................................................................... 17
Chansin 8 the lansuase on the console ............................................................................ 17
Running the ADAPTiQ_audio calibration ......................................................................... 18
English -5

Contents
Using the System
Remote control buttons ......................................................................................................]9
Programming the universal remote control ...................................................................20
Consumer Electronics Control ...................................................................................20
Test your sources for CEC............................................................................................21
Program the remote to control your source ............................................................22
Source selection ...................................................................................................................23
Select a source connected to the system ................................................................22
Select a source connected to your TV ......................................................................23
Universal source buttons and console connectors ........................................................23
Adjusting the volume ..........................................................................................................24
Function buttons ..................................................................................................................24
Programming a non-Bose remote control .......................................................................24
Getting System Information from the Display
Understanding messages on the display ........................................................................2S
Using the System menu ..............................................................................................2S
Error messages .............................................................................................................27
Acoustimass ®module status indicator ...........................................................................27
Care and Maintenance
Troubleshooting ...................................................................................................................28
Ifyour console cannot find the Acoustimass ®module .........................................2g
Factory reset the system ............................................................................................30
Reset a source button on the remote control .........................................................30
Service connectors on the Acoustimass module ...................................................30
Cleaning ..................................................................................................................................3]
Customer service ..................................................................................................................3]
Limited warranty ..................................................................................................................3]
Technical information ..........................................................................................................3]
6-English

Introduction
About youF Ci eMate 120
home theatersystem
The OineMate 120 system deliversspacious,detailedsound from one
compact soundbar.
System Features
• Advanced Bose audio processing provides natural and lifelike sound.
• ADAPTiQ_*_audio calibration optimizes sound quality.
Display provides access to system settings and information.
HDMI TM connectivity allows easy setup and ensures high-quality audio from your
connected sources.
Supports Consumer Electronics Control (CEC).
Programmable universal remote can control your TV, cable/satellite box and
other connected sources.
Hideaway wireless Acoustimasd '*>module provides impactful bass sound.
Soundbar can be mounted on the wall (kit available separately).
Supports the SoundTouch TM wireless adapter (available separately).
Introducing SoundTouch'" from Bose ®
With the SoundTouch TM wireless adapter (available separately), you can stream
Internet radio, music services (where available) and your music library. If you have
Wi-FP at home, you're ready to enjoy your favorite music in any room you want.
Key Benefits
• Enjoy wireless access to Internet radio, music services and your music library.
Stream your favorite music easily with personalized Presets.
Works with your existing Wi-FP network.
Free SoundTouch TM app for your computer, smartphone or tablet provides more
powerful control.
Simply add additional systems at any time for a multi-room listening experience.
Wide selection of Bose audio systems lets you choose the right solution for
any room.
English -7

Introduction
Unpacking the system
Carefully unpack the carton and confirm that the following parts are included:
q .............
Acoustimasd R_module Rubber feet Console
® ®
Acoustimass Consolepower cord HDMIcable ADAPTiQ®headset
power cord
Soundbar Speaker cable Universal remote control
(batteries provided)
The appropriate cords for region are supplied.
power your
Note: If part of the system is damaged, do not use it. Contact your authorized
Bose ®dealer or Bose customer service. Refer to the contact sheet in
the carton.
8-English

Introduction
P acement suide ines
To avoid wireless interference, keep other wireless equipment away from the
system. Place the system outside of and away from metal cabinets, away from
other audio/video components and away from direct heat sources.
Acoustimasd _ • Stand the Acoustimass module on its rubber feet along the same wall
module as your TV, or along any other wall in the front third of the room.
• Choose a stable and level surface. Vibration can cause the
Acoustimass module to move, particularly on smooth surfaces like
marble, glass or highly polished wood.
• Make sure there is an AC (mains) outlet nearby.
Soundbar • Place the soundbar in front of your TV.
• Do not place the soundbar inside a cabinet.
Console • Place the console near your TV. Do NOT place the TV on top of
your console.
Make sure there is an AC (mains) outlet nearby.
SoundTouch TM • Place the SoundTouch TM wireless adapter within 1-6 ft. (.3-1.8 m) of
wireless the console.
adapter
(available • If you have the SoundTouch TM wireless adapter, you can begin set up.
separately) Refer to the SoundTouch TM wireless adapter's owner's guide for
more information.
Note: Do not connect the adapter to the console until prompted by the
SoundTouch TM app.
Sample system placement
English -9

Setting Up the Acoustimass ®Module
Attachi_ S the FubbeF feet to the
Aceustimass medule
Attach the rubber feet to the Acoustimass module to protect your floor.
1. Turn the Acoustimass module upside down onto a soft surface to protect it
from being damaged.
2. Attach the rubber feet to the bottom of the Acoustimass module.
@-- Rubber foot
@
@
Bottom of Acoustimass module
3_
4_
Place the Acoustimass module on its feet.
Caution: Do not place the Acoustimass module on its front, back end, side or
top when in use.
"'"' !!i!!!il 1'
Remove all protective films. These may affect acoustic performance if left
in place.
10 -English

Setting Up the Acoustimass ®Module
Connectin 8 the Acoustimass module
to power
1, Plug the power cord into the Power connector on the Aooustimass module.
2, Plug the power cord into an AC (mains) outlet.
English -11

Setting Up the Soundbar
CoHHectiH_ the souHdbar
1, Insert the two-pronged end of the speaker cable into the
Speaker Connections connectors on the console.
2. Insert the other end of the speaker cable into the 10-pin connector on
the soundbar.
Wall mOUHtiH 8 the souHdbar
You can mount the soundbar on a wall. To purchase the WB-120 Wall Mount Kit,
contact your local Bose dealer or visit www.Bose.com
CAUTION: Do not use any other hardware to mount the soundbar.
12 -English

Setting Up the Console
CoHHecti_ 8 the co_so_e to your TV°s
HBM_ ARC conHecto_
Use the Bose ®HDMI cable to connect the console to your TV.
1. Disconnect your HDMI-connected sources, such as a cable/satellite box, DVD
or Blu-ray Disc TM player or game system, from your TV.
2. Insert one end of the Bose ®HDMI cable into the TV connector on the console.
3_ Insert the other end of the HDMI cable into your TV's NDMI connector.
Note: Use your TV's HDMI connector labeled ARC or Audio Return Channel
if available. If your TV does not have an HDMI ARC connector,
see page 14.
English- 13

Setting Up the Console
TVs without an NDMI ARC ¢o_r_ector
Ifyour TV does not have an HDMI ARC connector, you may need to make a
secondary connection to the console with an optical, coaxial or analog stereo
audio cable. Without this secondary connection, you may not hear audio from the
Bose®system.
Use asecondary connection in the following configurations
• You are using internal sources (such as Internet applications or an
over-the-air antenna).
• You are connecting sources to your TV.
Refer to your TV owner's guide for more information.
Tip: If your TV has IN and OUT audio connector panels, use audio OUT for your
secondary connection.
CoHr_ectin_ the toilsome to other sources
You can connect the console to other sources, such as a cable/satellite box, DVD
or Blu-ray Disc ''v'player or game system with an HDMI cable (available separately).
Ifyour source is non-HDMI compatible, use different audio and video cables
(see page 15).
1. Insert one end of an HDMI cable into your source's HDMI (OUT) connector.
2. Insert the other end of an HDMI cable into the appropriate HDMI connector on
the console. For example, to connect a game system, connect an HDMI cable
to the GAME connector.
Connect other sources to the
appropriate HDMI connector
on the console.
14 -English

Setting Up the Console
COHHectiH 8 to HoH-HDMI compatible sources
If your source is non-HDMI compatible, connect it to your TV using audio and video
cables (available separately). Refer to your T1/owner's guide for more information.
Tip: Ifyour source has IN and OUT audio connector panels, use audio OUT.
Audio-only sources
If your audio-only device, such as a media or CD player, is non-HDMI compatible,
connect it to the console's optical, coaxial or analog connector. You can use an
optical, coaxial or analog cable (available separately).
Note: After connecting your audio-only source, you must set the optical, coaxial or
analog input to the appropriate source. You can access these settings using
the System menu (see page 25).
CoHHectiH 8 the coHsole to power
1. Plug the power cord into the Power N connector on the console.
2. Plug the power cord into an AC (mains) outlet.
English- 15

Starting Up the System
_nsta_in 8 the remote control% batteries
1, Slide open the battery compartment cover on the back of the remote control.
2. insert the two provided AA (IEC-LR6) 1.5V batteries. Match the + and -
symbols on the batteries with the + and - markings inside the compartment.
3. Slide the battery compartment cover back into place.
Powerin 8 on the system
Press on the remote.
The console powers on.
The display defaults to CBL SAT for first time power on. Otherwise, the display
defaults to your last used source.
#
s
#
Note: The system powers off after sixteen minutes of inactivity. You can disable
AUTO OFF using the System menu (see page 25).
16 -English

Finishing Setup
CheckiH 8 for souHd
1. Power on your -IV.
2. If you are using a cable/satellite box or other secondary source, power on
this source.
Tip: If your secondary source is connected to your -B4select the appropriate
TV input. You may need to use a different remote.
3. Power on the system.
4. Press the appropriate source button.
5. Check if sound is coming from the soundbar.
Note: If you do not hear sound from the soundbar, see "Troubleshooting" on
page 28.
6. Press _, on the remote. Check that no sound is coming from the TV speakers.
Note: If you hear sound coming from your TV speakers, see "Troubleshooting"
on page 28.
ChaHSiH 8 the aHSua e oH the toilsome
Use the remote control to change the language on the console.
1.
2.
3.
Power on the system.
Press on the remote control.
Press Y until 10 LANGUAGE (_ appears on the display.
.............................__;_:_ii:_:i_iiiilili_i_i_i_iiiii_iiiiiiiiii!il¸iiii!i!!i!!i!ii!i!i!i!i!i!_!i_i!i_!il¸¸¸¸¸d_!!_i!ii!ii!ii!ii!ii!i!_iiiiiiiiiii!ii_iiiiiiiiiiiiiiiiiiiiiiiiiiiliiF_:_".....
_ iiiiliiiii¸ili!¸iliiii i i iiiii!!iii ililililiiiiiiii!!!!iiiiliiiliiiiiiliiiii!iiii!!:i_!_iiiiiiiiiiiiillii
4. Press'_ and _ to select your language.
5. Press _.
Tip: Look for the (I;_ icon in the System menu if you select the wrong
language.
English -17

Finishing Setup
R HHiH the ADAPTiQ a dio calib atioH
The ADAPTiQ audio calibration customizes the sound of the system to the
acoustics of your listening area by taking five audio measurements. To perform an
audio calibration, you need 10 minutes when the room is quiet.
1. Put the ADAPTiQ headset on your head.
During the ADAPTiQ audio calibration, a microphone on the top of the
headset measures the sound characteristics of your room to determine
optimal sound quality.
¢h
2. Insert the ADAPTiQ headset cable into the__ connector on the console.
3. Press on the remote control.
4. Press V until 14 ADAPTiQ appears on the display.
5. Press @.
6. Follow the voice prompts until the system completes the process.
7. Unplug the ADAPTiQ headset from the console and store it in a safe place.
Note: If you move the system or any furniture, run ADAPTiQ again to ensure
optimal sound quality.
18 -English

UsingtheSystem
Remote ¢oHtfo_ buttoHs
Use the remote to control sources connected to your system, adjust the system
volume, change channels, use playback functions, enable cable/satellite box
functions and navigate the System menu.
Source selection
Selects a source
connected to
your TV
Navigation pad
Lists recorded
DVR programs
System menu
TV aspect ratio I
Closed captioning
Toggles between
SoundTouch TM
(available separately)
and _ connector
Powers on/off the
Bose ®system
-- Powers on/off a
selected source
Displays the Internet
TV home page
-- Previous channel,
chapter or track
Playback
-- controls
Teletext mode
Function buttons
(see page 24)
English- 19

Using the System
P_oS_ammin _ the u_'_ive_sa_ _emote co_t_o_
You can use the remote to control your TV, cable/satellite box, DVD or Blu-ray
DiscrMplayer, game system, DVR or other auxiliary source.
Consumer Electronics Control
The system supports Consumer Electronics Control (CEC). CEC allows you to
control multiple HDMI-connected sources without programming the remote. You
can turn on/off CEC using the System menu (see page 25).
Your source may support CEC, but refer to it with a different name. Refer to your
source owner's guide for more information.
CEC controls sources connected to
the console's HDMI connectors.
Tip: You may need to use your source's system menu to enable CEC. Refer to your
source owner's guide for more information.
20 -English