BOX IT DESIGN PCASE0APiD User manual

DESIGN
O
www.boxit-design.com
MOUNTING THE BOX IT PREMIUM TABLET CASE
It is a simple and straight forward operation to mount the BOX IT Premium tablet case on
standard or glass walls.
However there are some basic recommendations to be considered especially with glass wall
mounting.
KEY HOLE PLACING
The tablet case can be placed in either vertical or horizontal position.
Minimum free space requirements from the key hole in order to allow the key to operate is
55 mm.
CABLING*
With brand new buildings or major renovations of meeting rooms most clients choose to hide
the cables inside door frames, walls and ceilings.
Cable canals in aluminium are available in most countries and often look great with the cases.
There are three cable entry holes in the cases originally meant for cable access backwards.
HIDING THE BACK OF THE TABLET CASE
In order to hide the case from the inside of
the meeting room you can simply place a
frosted piece of foil matching the tablet case.
Print templates are available on request.
MANUAL for
BOX IT Wall and Glass mounting iPad
*Important: We can supply 3 m cables for all iPad versions, however they are not MFi certied and a
replacement can be necessary at a later stage. 2 m MFi cables are available from Apple (recommended).
View from the inside of
a meeting room

1
21
2 3
3
4
Clean the area of the glass plate
where the tablet case is to be
mounted with the 3M cleaner sachet.
Place the acrylic plate leveled and in the
desired position on the glass plate.
Mark the top and one of the sides with
standard ofce tape or likewise.
Place the tablet case leveled and in the desired
position on the wall.
Mark the four VESA
holes on the wall
with a pen.
Remove the tablet case.
Pre-drill and insert
rawplugs if needed.
Use a M5 metal drill to open up the
four VESA holes marked inside the
tablet case.
The BOX IT Glass Plate
Mounting kit:
The BOX IT Standard Wall
Mounting kit:
Remove the four cover pieces
from the 3M tape at the back
of the acrylic plate.
Wait for minimum 24 hours before
mounting the tablet case to the
acrylic plate using the four M4x8 mm
screws.
4xM4x8 mm
Torx TX20 tool 3m VHB surface
cleaner sachet
Premium Tablet Case
Premium Tablet Case Acrylic plate with
3M 4910F VHB tape
Charging cable
Ofce tape
Charging cable
entry hole
entry
hole
entry hole
DESIGN
O
www.boxit-design.com
Place the acrylic plate onto the glass
at the tape markings. Press hard and
remove the ofce marking tape.
If using a charging cable: Pull it through
the groove in the acrylic plate and through
one of the entry holes ensuring enough
cable length for the tablet itself.
Use 4xM4 wall screws* to mount
the tablet case to the wall through
the four VESA holes.
* Of your choice, not included.
If using a charging cable:
Place the four 3 mm silicone
dots at the back of the tablet
case in a symmetric pattern
10 mm from the edges.
Pull the cable trough one
of the entry holes before
mounting the screws ensuring
enough cable length for the
tablet itself.
Mounting the BOX IT Premium Tablet Case on standard wall
Mounting the BOX IT Premium Tablet Case on glass plate
4 silicone dots

DESIGN
O
www.boxit-design.com
MANUAL for
Surface Cleaner Sachet for use with 3M™VBH™Tapes
The supplyed acrylic plate is for use on glass doors and walls.
Enclosed
A cloth (packed in a convenient sachet) soaked in isopropyl alcohol ideal for cleaning substrates prior to application
of a 3M Tape or Adhesive, especially 3M VHB Tape.
4 x Screws (4x6 / TX20) for mounting the BOX IT Design Secure Tablet Holder on the acrylic plate.
Please read the below instructions carefully!
VHB™
Surface Cleaner Sachet
For use with 3M™ VBH™ Tapes
Instructions for use: surfaces to be bonded together must be clean and dry. For use at room temperature. Always assume
that surfaces are dirty, as even Fingermarks affect the strength of the bond. Standard Clean - To remove light soil / ngermarks:
Open sachet, remove towelette and wipe across surface in one direction only until surface is clean. Allow 5 minutes
Danger
Hightly ammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Keep away from heat/
sparks/open ames/hot surfaces. - NO Smoking. Avoid breathing dust/fume/gas/mist/vapours/spray. IF IN EYES: Rinse
cautiously with water for several minites. Remove contact lenses., if present and eay to do do. Condinue rinsing. Dispose of
contents/conrtainer in accordance with applicable local/regional/national/international regulations. Manufacturer: 3M Part No
DT272990615
3M United Kingdom PLC, 3M Centre, Cain Road, Bracknell, Berks., RG12 8HT, Tel: [phone], 3MIreland Ltd.,
The Iveagh Building, The Park, Carrickmines, Dublin 18 - Tel.: [phone]