BPL BLSDFM20/2.4FHD User manual

AHD Waterproof IR
User Manual
Camera
DESCRIPTION
ATTENTION
SPECIFICATION
DIMENTION(MM)
FEATURES
PARTS INSTRUCTION AND INSTALLATION
*Specifications subject to change without notice. EN-A01-552F-20150529
Thank you for your purchasing this product. Before attempting to conn
-ect or operate this product, please read these instructions carefully and
save this manual for future use.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OP EN
CAUTI ON: TO RED UCE THE RISK OF ELECTRIC
SHOCK , DO NOT REMOVE COVER
(OR BAC K).
NO USER- SERVICEABLE PARTS INSIDE. REFER
SERVICING TO Q UALIFIED SERVI CE PERSONN EL
1.
is DC12V.
2.
3.
4
5.
6.
7.
Use the Appropriate Power Supply
The input power for the camera Be sure to connect it to the
appropriate power. Wrong connection may cause malfunction and/or
damage to the video camera.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no
user serviceable parts inside. Ask a qualified service person for servicing.
Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could
be damaged by improper handling or storage.
. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to
remove. Use a mild detergent and wipe gently.
Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive detergents.
Use a piece of lens tissue or cotton tipped applicator and ethanol.
Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely brightob
-jects that causes mear to appear irrespective of whether the camera is
operating or not. This can damage the sensor.
Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless commun
-ication device which emits strong electromagnetic field, some irregula
-rity such as noise on monitor screen may happen.
BLSDFM20/2.4FHD
The waterproof camera adopt 2.0 pixels 1080P@25/30fps
high performance AHD sensor, no compressed, no delay, and realtime
transmission image. IP66 waterproof standard, IR-CUT filter, smart-IR
control. Fashionable and professional design.
Megapixel

★Long-life IR LED design, whose
brightness is several times higher and
service life longer than ordinary LED’s
★2.0Megapixel high performance SONY322+NVP2441 sensor with
25/30fps@1080P, no compressed, no delay, and real-time transmission
image .
★Built in IR-CUT, ensure the camera work properly both day and night.
★IP66 waterproof standard
★SMART-IR,20 meters IR range
★Powerful OSD menu allows for various function settings.
★Image transmission up to 500 meters.
★Adopts special algorithm, reducing video and color noise andthus
improve image resolution, to produce clearer and sharper image.
Model
Sensor
Video format
Sync code
S/N Ration
Mini-illumination
AGC
White Balance
OSD
Voltage
Current
Lens
Operate Temperature
Size
Weight
PAL/NTSC
Internal
AUTO
AUTO
Support
Support
DC12V
More than 80dB (with AGC OFF)
Smart IR
Brightness
NR
Backlight
0Lux (IR ON)
3.6mm HD Lens
Video output AHD/CVBS
Storage temperature
IR range
Waterproof standard
20m
IP66
2D-DNR/3D-DNR
AUTO
BLSDFM20/2.4FHD
Effective Pixels 1920(H)x1080(V)
Max. transmission
distance 500M
DAY/NIGHT
Support ICR
-10 ~50 RH90% MAX℃ ℃
-20℃~70℃
Video Frame Rate 25/30fps@1080P
200mA±15%(IR ON);80mA±15%(IR OFF)
Adjustable
SONY322+NVP2441
320g
64mm（H)*106mm(Φ)
1.Dome cover
2.Base screw
3.Press Plant
4.Video Output
5.Power Input
6.Camera Core
Component
7.Install base
1.Open the packing box, and take out camera and accessory bag. Loosen Install
base screw by allen wrench (3mm), and take the dome cover out.
2.Install the install base on the wall, and then put the camera core component into
the dome cover.
3.Fixed the dome cover into the install base, after adjusting the camera viewing
angle as needed.
4.Fixed the press plant to the dome cover by srew.
5.Installation completed. Please do not touch the dome cover.
7
531
4
62
105,98 105,98
96,86
∅4
12,5
63,28
Ø69
∅69

O S D M E N U
1.LENS
MAIN MENU
2.EXPOSURE
3.BACKLIGHT
4.WHITE BAL
MANUAL ,AWB )
5.DAY&NIGHT
DC (MANUAL)
6.NR
7.SPECIAL
8.ADJUST
9.EXIT RET
OFF( BLC ,HSBLC )
ATW(AWC SET,INDOOR,OUTDOOR,
EXT (AUTO ,COLOR,B/W )
1.MODE
DC LENS MODE
2.IRIS SPEED
3.RETURN
INDOOR OUTDOOR ( )
RET
8 (0-15)
1.MIN SHU
OUTDOOR MODE
2.MAX SHU
3.RETURN
DC (MANUAL)
1/10000、1/50000、FLK)
ATW(AWC SET,INDOOR,OUTDOOR,
1/50(1/200、1/400、1/1000、1/2000、1/5000、
1.SHUTTER
EXPOSURE
2.ACG
3.SENS-UP
4.BRIGHTNESS
6.DEFOG
7.RETURN
OFF(AUTO )
5.D-WDR
- - -
15 (0-15)
34 (0-100)
AUTO(OFF,ON )
RET
1.LEVEL
D-WDR
2.RETURN RET
0 (0-8)
OFF(ON)
1.POS/SIZE
DEFON
2.GRADATION
3.DEFAULT
4.RETURN
0 (0-2)
RET
1.SELECT
HSBLC
2.DISPLAY
3.BLACK MASK
4.LEVEL
6.DEFAULT
7.RETURN
5.MODE
AUTO(ARE1-ARE4)
20 (0-100)
ALL DAY(NIGHT)
RET
ON (OFF)
ON(OFF)
1.AGC GRADE
NIGHT
2.RETURN
20 (0-100)
RET
1.BLUE
MANUAL WB
2.RED
3.RETURN
50 (0-100)
RET
50 (0-100)
1.BURST
2.IR SMART
3.RETURN RET
RET
RET
IR SMART
1.LEVEL
2.AREA
3.RETURN RET
2 (0-15)
1.2D NR
NR
2.3D NR
3.RETURN RET
HIGH
LOW
SPECIAL
0 1 2 3 4 5 6 7 8 9
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z ►
( ) - - - ■ / = & : ~ , .
CLR POS END
AHD 2.0
-------------------------------
1.FREEZE
D-EFFECT
2.MIRROR
3.NEG IMAGE
4.RETURN RET
OFF(ON)
OFF(MIRROR,V-FLIP,ROTATE)
OFF(ON)
1.CAM TITEL
SPECIAL
2.D-EFFECT
3.MOTION
4.PRIVACY
OFF( ON )
ATW(AWC SET,INDOOR,OUTDOOR,
5.LANGUAGE
6.DEFECT
7.RS485
8.RETURN RET
END (CHN1 ,CHN2 ,TUR ,NED ,POR ,
RUS ,POL ,SPA ,ITA ,FRA ,GER )
OFF( ON)
1.SELECT
MOTION
2.DISPLAY
3.SENSITIVITY
4.COLOR
GREEN
5.TRANS
7.DEFAULT
8.RETURN RET
1.00
AREAI(AREA2,AREA3,AREA4)
6.ALARM
64 (0-100)
ON ( OFF)
1.SELECT
PRIVACY
2.DISPLAY
3.COLOR
4.TRANS
WHITE
5.DEFAULT
6.RETURN RET
1.00
AREAI(AREA2,AREA3,AREA4)
COLOR (MOSAIC )
1.LIVE DPC
DEFECT
2.WHITE DPC
3.BLACK DPC ON
4.RETURN RET
OFF(ON )
ON
1.AGC LEVEL
LIVE DPC
2.LEVEL
3.RETURN RET
64 (0-100)
100 (0-100)
1.POS/SIZE
WHITE DPC
2.START
7.RETURN RET
8 (0-100)
14 (0-15)
3.DPC VIEW OFF
4.LEVEL
5.AGC
6.SENS-UP x2(x4,x6,x8,x10,x15,x20,x25,x30)
1.POS/SIZE
BLACK DPC
2.START
5.RETURN RET
100 (0-100)
3.DPC VIEW OFF
4.LEVEL
1.CAM ID
RS485
2.ID DISPLAY
4.RETURN RET
0 (0-255)
3.BAUDRATE
OFF(ON)
38400(2400/4800/9600/19200)
1.SHARPNESS
ADJUST
2.MONITOR
5.RETURN RET
AUTO
3.LSC
LCD
ON
4.VIDEO.OUT PAL
1.D
D&N EXT
2.N
3.RETURN
2 (0-60)
RET
2 (0-60)
N DELAY
D DELAY
B/W
D&N AUTO
5.RETURN RET
1 (0-60)
18 (0-18)
2.D N DELAY
4.N D DELAY
1. →D N(AGC)
3.N→D(AGC)
1 (0-60)
18 (0-18)
Press the button into the main menu, set the LENS mode, EXPOSE, BACKLIGHT,
WHITE BALANCE, DAY&NIGHT, NR, SPECIAL, ADJUST as needed.
1. LENS
After set the LENS mode, press the menu button into the submenu, can adjust
the P-IRIS MODE, LEVEL and LIMIT as needed.
2. EXPOSURE
Press the menu button into the expose’s submenu, set the SHUTTER\ AGC\
SENS-UP\ BRIGHTNESS\D-WDR and DEFOG as needed.
3. BLC
Press the menu button into the BLC’s submenu, set the GAIN\ AREA\ DEFAULT
as needed.
BLC
RET END( )
1.GAIN
2.AREA
3.DEFAULT
4.RETURN
MIDDLE( )HIGH,LOW
4. WB (WHITE BALANCE)
Press the menu button into the WB’s submenu, set the BLUE\ RED tone as needed.
5.D&N (DAY & NIGHT)
Press the LEFT OR RIGHT button choose the D&N’s mode, and then press the
menu button into the submenu, set the params as needed.
6. NR( NOISE REDUCE)
Press the menu button choose the NR mode, and then press the menu button into the
submenu, set the params as needed.
7.Special
Press the menu button into the submenu, set the CAMERA TITLE, D-EFFECT,
MOTION, PRIVACY, LANGUAGE DEFECT as needed.
8.ADJUST
Press the menu button into the submenu, set the SHARPNESS, MINITOR, LSC,
VIDEO OUT as needed.
www.bpliq.com