About
The near infrared CONTOUR IR Digital camera is designed for
observation, registration and recording radiation in near infrared
zone in 400-1700 nm spectral region emitted by infrared sources
such as GaAs IR LED, diode or solid-state lasers as well as for
use in infrared microscopy, infrared luminescence, examination
of documents, forensics, art restoration and etc.
The camera is based on the newest technology CMOS sensor
with increased sensitivity, micro lenses on photo cells and
intensifying cascades in each element. Camera is connected to
PC via USB 2.0 (USB 3.0) cable.
Operation
CAUTION! Do not use direct powerful laser radiation on a
sensor.
CAUTION! Use filters, attenuators or beam splitters to decrease
of laser radiation.
1. Install the camera driver and software from CD.
2. Connect camera to PC.
3. Start software on PC.
4. Open EVScap program.
5. Observing the image on monitor, focus the objective lens of
the camera. If necessary, switch on/off automatic control,
arrange parameters of the camera (brightness, contrast,
saturation, factor of scale - correction) "
"
