Brähler Systems DIGIMIC DLine Slim UTM User manual

Quick Guide
DIGIMIC DLine Slim UTM
Under-table solution for audio line-in interface
Article no.: 05.00 2/05.00 3

DIGIMIC DLine Slim UTM Quick Guide
Quick GuideQuick Guide
Quick Guide
2
BRÄHLER Systems GmbH
Auf der Alten Burg
53 39 Königswinter
Germany
T
+4
9 (0)
224
4
930
-
0
F [phone] [e-mail]
www.braehler-systems.com
05.00 2 200113 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
Introduction and connections
Introduction and connectionsIntroduction and connections
Introduction and connections
The DLine Slim UTM is a high quality audio input device that allows you to feed an external audio source into
the DIGIMIC system. The sound source is controlled by software. What makes the DLine Slim UTM so special
is that it can be mounted in the smallest of places. The DLine Slim UTM can be mounted under a table or a
lectern - only what is really needed is visible: the microphone.
The DLine Slim UTM is available both in a version for microphone level signals (Art. No. 05.00 3) and in a
version for line level signals (Art. No. 05.00 2).
The DLine Slim UTM is not allowed to be connected in a chain with the DDol unit.
PREV: Connection from previous
unit
or
central unit (RJ45 connector)
NEXT: Connection to the next unit
(RJ45 connector)
XLR connector for microphone
Example system image

DIGIMIC DLine Slim UTM Quick Guide
Quick GuideQuick Guide
Quick Guide
3
BRÄHLER Systems GmbH
Auf der Alten Burg
53 39 Königswinter
Germany
T
+4
9 (0)
224
4
930
-
0
F [phone] [e-mail]
www.braehler-systems.com
05.00 2 200113 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
Operation
OperationOperation
Operation
The DLine Slim UTM is designed for installation in the smallest of places - for example under a table or on the
underside of a lectern. Please refer to the following drawings for the required space. (Please note that in
addition to the DLine Slim UTM you will also need space for plugs and cables).
Attach the DLine Slim UTM to its destination (drill holes specified, see pictures above). If necessary, drill holes
in the destination of your microphone (e.g. for microphones in the lectern). If necessary, fasten the
corresponding microphone jack in the drill holes (for drill sizes, please refer to the corresponding module).
Connect the DLine Slim UTM with its central unit DCen or a previous unit (PREV, RJ45 plug) and the following
units (NEXT, RJ45 plug).
Connection from the
central unit or from the
previous unit
Connection to the
next unit

DIGIMIC DLine Slim UTM Quick Guide
Quick GuideQuick Guide
Quick Guide
4
BRÄHLER Systems GmbH
Auf der Alten Burg
53 39 Königswinter
Germany
T
+4
9 (0)
224
4
930
-
0
F [phone] [e-mail]
www.braehler-systems.com
05.00 2 200113 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
Connect the desired audio input device (e.g. wireless microphone, microphone in the lectern, etc.) via the XLR
connector. The devices are immediately ready for use in the system via the DIGIMIC DLine Slim UTM and can
be controlled via the control software MicControl or brählerOS.
The input sensitivity of the line level version is preset to approx. 700mV. It can be adjusted internally between
100mV and 1,2V. This adjustment should only be carried out by experienced specialists.
Connector assignment
Connector assignmentConnector assignment
Connector assignment
The DLine Slim UTM has the following connector assignment as standard:
XLR 3
XLR 3XLR 3
XLR 3-
--
-pol.
pol. pol.
pol.
1Cable Shield
2Positive polarity (+)
3Negative polarity (-)
Warn
WarnWarn
Warnings
ingsings
ings
The connectors of the DIGIMIC DLine Slim UTM are only suitable for devices of the DIGIMIC
family. Do not connect any other devices!
In case of faults, contact a technician, do not attempt to repair, unscrew or similar the DLine Slim
UTM yourself

DIGIMIC DLine Slim UTM Quick Guide
Quick GuideQuick Guide
Quick Guide
5
BRÄHLER Systems GmbH
Auf der Alten Burg
53 39 Königswinter
Germany
T
+4
9 (0)
224
4
930
-
0
F [phone] [e-mail]
www.braehler-systems.com
05.00 2 200113 V1.0 BRÄHLER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
Further information about our products can be found on the Internet under:
www.braehler-systems.com
© 2019
Copyright by BRÄHLER Systems GmbH, Königswinter
All rights reserved, in particular (also in extracts) those of translation, reprinting, reproduction by copying or
similar procedures.
BRÄHLER Systems reserves the right to make technical changes without prior notice.
Brähler Systems GmbH
Auf der Alten Burg
53 39 Königswinter, Germany
T [phone]
F [phone]
[e-mail]