Brinsea Ovation 28 Advance User manual

2
AF36 US Issue 01
Read the instructions before use! Do not cover!
Damaged appliances must not be used.
The appliance and its supply cord must be placed in an indoor area not subject to splashes of water or wet conditions and protected from or out of reach
of animals.
Repairs must be carried out only by a suitably qualified person.
This appliance must not be used, cleaned or maintained by children or persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge without supervision. Children must not play with the appliance.
Disconnect the incubator from the mains power supply during cleaning. Ensure that all electrical parts are kept dry.
Please read these instructions carefully before setting up your incubator to achieve best results and keep these instructions safe for future reference.
This document includes recommended procedures for successful hatching but incubation involves the control and manipulation of a large number of factors and in
certain circumstances different procedures may be necessary.
For more detailed information on all aspects of egg incubation including helpful advice on getting best results please visit our website at www.brinsea.com
Your incubator is designed to allow the user to vary the incubation conditions to suit a wide range of species in different ambient conditions and the specific set-up for
every situation is beyond the scope of these instructions.
For more information on incubation and hatching please download our FREE Incubation Handbook: www.brinsea.com/brochures/BrinseaIncubationHandbook2016.pdf
To register your new Brinsea product please visit www.brinsea.com and follow the link on the right hand side of the home page to qualify for your free 3 year
guarantee.
Record your appliance serial number here: __________________

3
AF36 US Issue 01
1Setting Up Your Incubator
Unpacking
Part Quantities
Assembly
Location & Installation
2 Product Introduction –Functional Features
3Settings –Control Menu
4Display
5Temperature
6Humidity and Ventilation
7Eggs
8Periodic Incubation Cooling
9Hatching & Cleaning up
10 Specifications
CONTENTS
-
4
5
6
9
10
11
12
14
15
17
18
19
20

4
AF36 US Issue 01
1 SETTING UP YOUR INCUBATOR
UNPACKING
Your incubator has been supplied in protective
packaging. Please remove all tape, strapping and
packing from the incubator and parts. Retain the
carton and packing materials to enable the unit to
be repacked.
1: Remove the packaging and lift off the top of
the incubator.
2: Remove the card packing inserts and elastic
bands from inside the incubator.
3: Check that the electrical supply matches the
machine’s requirements (marked on the technical
label inside the clear top).
1.
2.

5
AF36 US Issue 01
1
4
2
1 SETTING UP YOUR INCUBATOR
PART QUANTITIES
The diagram shows all the parts that have been
supplied to you. Ensure you have the correct
quantities of each part. If there are any parts
damaged or missing please contact your retailer or
Brinsea Products (at the address at the end of the
document). Damaged appliances must not be
used.
1: Top
2:Egg Carriers (4)
3: Link
4: Water Pan Covers (2)
5: Base
3
5