6. Operate th�s product us�ng only w�th the power supply �ncluded or prov�ded as an
accessory. Incorrect adapter poles or voltage may cause ser�ous damage to the dev�ce.
7. The power adapter �s used correctly �n the upr�ght pos�t�on or on the floor. It �s not
des�gned to hold the dev�ce �n a d�fferent pos�t�on. It �s recommended that you use the
adapter of the dev�ce w�th a current-proof socket.
8. Remove the plug before clean�ng the dev�ce. Do not use l�qu�d or aerosol cleaners. If
the lens become d�rty, use a blower to blow off d�rt and dust, or a soft, dry cloth to w�pe
off the lens.
9. Do not unplug the power adapter wh�le �t �s work�ng. Th�s may cause a hazardous
s�tuat�on.
10. Do not allow anyth�ng to rest on the power cable. Do not place th�s equ�pment
where the cable could be crossed or clamped.
11. Do not overload the sockets or use an extens�on cable.
12. Do not place the dev�ce on an unstable table, shelf, stand or other unstable surface.
13. Th�s dev�ce must not be placed �n any area where proper vent�lat�on �s not
ava�lable. Th�s dev�ce must not be placed near or over a rad�ator or heat source. It must
not be covered or wrapped w�th fabr�c.
14. Do not demounted the dev�ce. In case of any fa�lure, please contact our author�zed
serv�ce. Malfunct�ons caused by the user error w�ll cause the product to be out of
warranty.
15. Protect the dev�ce from any fall�ng and �mpact.
16. Do not �nsert any object �nto the voltage t�ps of the dev�ce �n order to avo�d a short
c�rcu�t. Do not sp�ll any type of l�qu�d �nto the dev�ce.
17. Check the mechan�cal parts (aga�nst damage) of your dev�ce per�od�cally dur�ng
use.
18. Keep all parts and accessor�es out of ch�ldren’s reach.
19. Br�on Vega reserves the r�ght to make changes to the spec�f�cat�ons of the dev�ce
w�thout pr�or not�ce.
4
