BRISTON Streamliner Installation instructions manual

INSTRUCTIONS & WARRANTY
Streamliner ADventure

INTRODUCTION
Congratulations for the acquisition of your BRISTON watch, and
thank you for your condence.
The STREAMLINER ADventure is the perfect balance between
a timepiece with an accomplished design and a watch with
maximum functionality thanks to these two movements.
Shock resistant & true to the cambered-barrel shape of the
Streamliner product line, this ultra robust 44mm case is equipped
with four pushers that add a modern and sporty look. The new
Streamliner is both driven by quartz analogic movement as well
as a digital movement.
Also with backlighting of the two digital screens located at 12
o’clock and 6 o’clock, the central part is provided with numbers
& mentions afxed on different levels to add depth and be used to
display the various functions offered by the watch. A few presses
are enough on the 4 buttons located on both sides of the case to
enjoy an adventurous life!
INSTRUCTIONS
The Streamliner watch must be serviced regularly in order to
work correctly.
The time left between services will vary depending on the
model, climate and amount of care you take of your watch.
As a general rule, we recommend that you follow the steps
below in order to preserve the condition of your watch as
long as possible.
> Temperature: avoid temperatures exceeding 0/100°F;
-20/+40°C and extreme conditions.
> Avoid prolonged exposure to sun, water and steam to
prevent distorsion and colour fading.
> Avoid contact with alcohol, perfume, detergents and
cosmetic products to prevent corrosion.

SWITCHING ON YOUR BRISTON ANALOGIC
MOVEMENT
> Pushers buttons: do not press any pushers buttons while under water
to prevent water from entering the mechanism.
> The service life of our quartz battery ranges from 2 to 3 years
depending on the use of the model.
For your information, the continuous use of the backlighting function
strongly reduces the battery life of the quartz battery.
> Screwing winder: screw the winder carefully to prevent any water
entering the mechanism.
> Check your model’s ATM level so that you know how deep you can
use it. (10 ATM = 100 meters of depth – 330 feet).
To remind, your BRISTON watch can only be used in the following
conditions: washing hands & shower as well as water sport activities
such as surf, swimming, sailing and others water sports.
DO NOT USE FOR DIVING ACTIVITY.
closed position
Hour hand
Pusher A
(Light)
Pusher C
(Start/Stop)
Pusher B
(Mode)
Pusher D
(Reset)
Minute hand
SIG
(Signal
Schedule in
Service)
SPL
(Split time)

SETTING OF YOUR BRISTON WATCH - Digital
Movement
Your watch has 4 different modes:
a) Time mode
- Display of hours, minutes and seconds in 12h or 24h formats.
- Display of the month, day of the week and date.
SETTING OF YOUR BRISTON WATCH - Analogic
Movement
a) To set the TIME:
-Pull the crown out to position 1.
-Rotate the crown in either direction correctly set the time.
-Push the crown all the way back in.
NOTE: Analog and Digital times are set and function
independently
closed position
Hour hand
Hour
Minute
Day of the
week
Day
Month
Alarm
Snooze
12h/24h
Second
Minute hand
position 1

SETTING OF YOUR BRISTON WATCH - Digital
Movement
b) Chronograph Mode
- Chronograph with split seconds function until 23 hours, 59
minutes and 59.99 seconds.
-Hundredth seconds resolution.
To use the stopwatch:
- The chronograph function measures the time intervals at
100th of a second up to 24 hours.
- Press push-button C to start the chronograph.
- Press button C a second time to stop the chrono
then press button D to reset the counter.
- When the chronograph has started, press push-button D to
take a rst measurement without stopping the stopwatch.
- Then press push-button D for a second measurement and
press button C to display this measurement.
Finally, press button D to reset the counter to zero.
- When the chronometer is running, press the push-button
MODE (B) to return to normal time. Attention: the stopwatch
will continue to run.
Pusher A
(Light)
Pusher C
(Start/Stop)
C
Start
C
Stop
C
Restart
C
Stop
D
Reset
Pusher B
(Mode)
Pusher D
(Reset)

SETTING OF YOUR BRISTON WATCH - Digital
Movement
c) Alarm Mode
To set the ALARM:
- Press button B (mode) until the terms «AL» will appear at 10
o’clock.
- You are now in alarm mode
- Press once button C to activate the snooze function
Press button C a second time to activate
the alarm & the snooze functions
Press button C a third time to deactivate the alarm & snooze
functions of your watch.
Pusher A
(Light)
Pusher C
(Start/Stop)
Pusher B
(Mode)
Pusher D
(Reset)
C
Activation of the
snooze
C
Activation of both
snooze and the alarm
C
Deactivation of the
snooze and the
alarm functions
C
Activation of the
alarm

- Alarm setting: press button D to select the hour or minute
setting when you set the hours, the element will blink, press
the pusher C to conrm the setting and move on to the minute
setting.
Finally, when you have nished setting your alarm, a single
press on the button B will sufce to return to normal time.
- Snooze alarm: When the alarm sounds, press on button C
or D to stop it and press the key B to activate or deactivate
the snooze function when passing hours. While the snooze
function is activated, the alarm sounds ve minutes later and
stops automatically after 20 seconds.
- To reset the digital module to factory parameters, press and
hold the ABCD buttons for 2 seconds.
C
Alarm setting
C
Pass to Minute
setting
C
Minute
setting
D
Hour setting
D
Exit alarm
setting

SETTING OF YOUR BRISTON WATCH - Digital
Movement
c) Time Adjustment Mode
To set the hour:
- Press button B once and the seconds blinks. Then press D
to set the hours and the needed display mode (12h or 24h).
- If it is in 12h mode there will be on the right of your screen,
the term «A» for AM for ante meridiem (before noon) and
«PM» for post meridiem (afternoon).
- If it is in 24h mode, the letter «H» appears.
- The seconds blinks when charging, press on the push-button
D to reset; press button C
to select an item. In the following order:
Hour Minute Month Day Day of the week
Second.
- When setting the Hours «H» corresponds to 24h format and
«AM» or «PM» correspond to the 12h format.
- Press on button D when the seconds are between 30 and 59
to reset them to 00 and add 1; you then add a minute. In the
range 00 to 29, the minutes remain unchanged.
Pusher A
(Light)
Pusher C
(Start/Stop)
Pusher B
(Mode)
Pusher D
(Reset)
C
Reset second
C
Hour setting
C
Minute setting
C
Month
setting
C
Day setting
C
Passing
to second
setting
C
Day of the week
setting
D
Passing to hour
setting
D
Passing to
minute setting
D
Passing
to month
setting
D
Passing to
day setting
D
Passing to day of
the week setting

> loss of water resistance following exposure to water at a
pressure greater than 100 meters OR loss of water resistance
after using the winder under water OR damage following
the use of alcohol or detergents OR signicant damage or
corrosion on the watch.
BRISTON will send a bill for its fees to clients claiming
additional services or who are unable to present a valid
warranty certicate.
The information above is classed as technical information and
will be subject to nal approval from BRISTON. All cases not
covered by the above list will be dealt with accordingly. The
information contained in this document belongs to BRISTON
and may not be reproduced without its authorization.
Every BRISTON timepiece comes with a 2 YEARS
INTERNATIONAL WARRANTY against defects in material
and workmanship. This warranty covers all parts except the
battery and all above mentioned elements.
WARRANTY
Thanks to the BRISTON warranty, any BRISTON watch that has
to be repaired due to a manufacturing fault will be repaired
free of charge.
The warranty certicate must be completed, stamped and
signed by the authorized BRISTON retailer.
The following damages or cases are not covered by the
BRISTON warranty:
> any damage resulting from inadequate or insufcient care,
an accident or normal wear and tear;
> the watch dial, strap, case, glass, battery, strap links and
any other accessory sold with the watch or contained in the
packaging;
> any complaint associated with damage or injury caused
directly or indirectly by wearing the BRISTON watch;
> a functional failure following the battery running out;

The limited warranty is obsolete if the defect is discovered to be
caused by abuse or tampering with the watch.
Please rst contact the nearest authorized BRISTON dealer
who will proceed with the return and please read Termes &
Conditions in ofcial website : www.briston-watches.com or
contact the Customer Service by e-mail: sc@briston-watches.
com
We will not be responsible for any consequential damages
arising from the ownership or use of timepiece.
Should your timepiece become inoperative due to a defect in
materials or workmanship, please return it to our ofce.
In case of substitution of your BRISTON watch, we will always
try to nd a similar product for your best satisfaction.
BRISTON can not guarantee exact & similar patterns or colors
specially with the “tortoise shell” pattern as the cellulose
acetate is handmade & unique.
Please include your watch, the completed warranty form
(with stamp of the shop) together with your proof of purchase
clearing stating the nature of the fault.

www.briston-watches.com