BroadMobi BMC R708A User manual

BMC R708A User Manual
Interface
key
Illustrate
Power key
Long press over 5 seconds to power on and long press to power off
WPS
Press to active the WPS
Reset
The Reset button is on the opposite side of the machine. If you forget
Administrator password or Wireless network key, you can press the
Reset key to restore factory default settings.
LED Indication
Indicator
Color
Working Status
Power
LED
Green
Solid:booting up the device
Amber
Blink:Charging
Blink:
Turn
on-0.5s
Turn
off-0.5s
Blue
Solid:Battery High(100%-60%) or Charge Completed
Amber
Solid:Battery Middle(60%-15%)
Red
Solid: Battery too low nearly shutdown(〈15%)
SMS LED
Blue
Blink:NewSMS
Signal
LED
Blue
Solid: Regiester to LTE(not connect)
Blink: Connected toLTE network
Green
Solid: Regiester to 3G(not connect)
Blink: Connected to3G network
Purple
Solid: Regiester to2G(not connect)

Blink: Connected to2G network
Red
Solid:No Service/Device Error
WiFi LED
Blue
Solid:No Client
Blink: Client is actived
Blink: WPS is actived
Blink:
Turn
on-0.2s
Turn
off-0.1s
Installation
Follow the diagram to install the SIM card and SD card
Tips: Always switch the device off and disconnect the charger before removing the
battery.
1. Remove the back cover and battery;
2. Insert the SIM card and SD card. Ensure that the contact area on the card is facing
down and that the beveled corner on the card is facing the beveled corner on the
holder.
3. Align the battery contacts with the battery compartment connectors, and insert
the battery. Replace the back cover lastly.
Charge

Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
1. Connect the charger to an outlet.
2. Connect the USB charger plug to your device’s USB port.
3. When the device indicates a full charge, disconnect the charger from the device,
then from the outlet.
One：Using charge adapter
Two：Using USB port

BMC R708A Usage
R708A support 4G/3G networks. Insert the SIM card, Wi-Fi devices and the
computer can access the Internet through R708A, enjoy high-speed network
services.Smart phones, tablet computers, game consoles and other Wi-Fi devices
can be connected with the R708A Wi-Fi connection for Internet access.
Computers & laptops etc. may be connected to the R708A via USB cable for
Internet Access.
R708A connects computer for the first time via a USB connection, you need to
follow the prompts to install the driver
Wi-Fi wireless Internet access
In order for a WiFi device to establish a connection with the R708A for the first time,
you will need to select the R708A SSID (WiFi name) & enter the relevant WiFi
password, which you may find in the following ways:
Method one: on the nameplate view the default SSID and Wi-Fi passwords

Method Two: Login management page view
1.Computer, open your browser, input http://192.168.0.1 and enter.
●The default Account is admin
●The default Password is admin
Enter the Account and Password, login the administration pages
2.Enter the Wi-Fi menu, view the default SSID and Wi-Fi password

●The default SSID is R708A
●The default Wi-Fi Password is 87654321
★Recommend that you start using R708A administration pages after setting a
convenient landing memorizing SSID and a higher safety factor Wi-Fi
passwords
Install the driver and connecting the device
USB Connection:Windows 7 for example
1. Keep R708A powering on,Plug the device into your computer,it will shows like
the following pictures step by step.

2. Double-click the , wait for the installation to complete

3. Check the network card is installed correctly,like the following pictures
Or,
Establish Wi-Fi connection:you must ensure that the computer equipped with a
wireless network card. If the computer showed the presence of Wi-Fi

connectivity, the wireless LAN is available. Otherwise, you need to check your
wireless network card is working properly.
1. In the Wi-Fi list, select the SSID consistent with R708A Wi-Fi, click Connect
2. Enter the correct Wi-Fi password, click OK
3. Wait a moment, Wi-Fi connection is displayed next to the name, Wi-Fi
connection is successful

WebUI
●Home
First part of the main display settings and network status information, such as
IPaddress, SIM card status, type and quality of the network signal, whether it is
roaming, with or without a new message, and traffic statistics,and system