Brookside Design Vis-i-Rack VR864 User manual

Vis-i-Rack VR864/VR165
High Capacity Roll Storage Rack
Installation Instructions
Part# Description Qty
Tools required for assembly: Phillips screwdriver
1 End Cap 4
2 Upper tube rails with rungs 2
3 Wall Braces 2
4 Lower tube rails with feet and rungs 2
5 Bolt 4
6 Hex Nuts 4
7 Flat Washers 6
8 Long Drywall Screw 6
Page: 1 /3

Vis-i-Rack VR864/VR165
High Capacity Roll Storage Rack
Installation Instructions
1) Attach wall braces (part 3) to lower tube rails with feet (part 4) using bolts (part 5) with hex nuts (part 6).
2) Attach wall brace (part 3) to upper tube rails (part 2) using bolts (part 5) with hex nuts (part 6).
Page: 2 /3

Vis-i-Rack VR864/VR165
Page: 3 /3
High Capacity Roll Storage Rack
Installation Instructions
3) Slide upper tube rails into lower tube rails with feet.
4) Locate wall studs and attach rack to wall using six (part 8) screws. If you cannot locate wall studs we suggest you
attach the rack to a solid wall surface. If you cannot locate the studs or are unable to attach to a solid wall surface,
we suggest that you have the rack installed by a professional using hollow wall anchors.