Brookstone BKWIFICAMWL1 User manual

USER MANUAL
For more products please visit www.brookstone.com
WiFi Hidden
Security Camera
FCC ID: 2AYUS-K231

For more products please visit www.brookstone.com
FCC Statement:
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
2. This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between
the radiator and any part of your body.

For more products please visit www.brookstone.com
WARRANTY INFORMATION
One Year Limited Warranty.
Customer Service: 732-994-2301; email: [email protected]
©Smartpoint LLC,
250 Liberty Street Metuchen NJ, Suite 1A
The BROOKSTONE trademark, names and logos are owned by
BKST Brand Holdings LLC ©2021. All rights reserved
Manufactured, marketed and distributed by Smartpoint LLC, under license
Google, Android and Google Play are trademarks of Google LLC.
App Store®is a registered trademark of Apple, Inc
All trademarks and Registered trademarks are property of their respective owners
Made in China

SPECIFICATIONS
Model: BKWIFICAMWL1
Resolution:1920x1080
Alarm: Motion detection
Viewing Angle: 70°
Audio: Microphone built-in
Micro SD Card Storage: Up to 128GB
Power Supply: AC100-240V
Power Output: DC5V / 1A
Wireless Type: Wi-Fi 2.4GHz
Operating System:
Android™ 8.0 or higher, iOS 7.0 or higher
FEATURES
• Wi-Fi remote controlled through App
• Hidden appearance(looks like USB block)
• Cordless, plugs directly into outlet
• Motion detection
• Live video
• Video recording
• Takes still photos
• Cloud storage or Micro SD Card storage

PRODUCT CONFIGURATION
Lens
Items included in package:
Hidden Security Camera, 2 Detachable Face Plates,
and User Manual.
USB port
Reset button
Plug
Camera face plate is detachable
Indicator LED
Micro SD Card Slot

DOWNLOAD APP
Brookstone Smart
1. Android: download “Brookstone Smart” app
on Google Play.
2. iPhone: download “Brookstone Smart” app
from the App Store. *

REGISTRATION AND LOGIN
1. Run the “Brookstone Smart” app from your
smart phone.
2. Register and login.
*Screenshots may slightly differ from actual app.
*

PUSH NOTIFICATIONS
1. You can turn on/off notifications for all devices
connected to app by clicking on the “Me” button at the
bottom right of the screen.
2. Then click on ”Settings” button. From there you can turn
on/off all notifications.
3. To view notifications in the app, click on “message
center” on the “me” tab on the bottom.
4. To turn on/off notifications for just the camera

REMOVE A DEVICE
1. From the home screen, click on the device you would like
to remove.
2. Then click on the edit symbol on the top right of the
screen.
3. From there you would then click the “Remove Device”
button at the bottom of the screen.

1. Make sure phone is connected to your
Wi-Fi network and that it is a 2.4GHz network.
2. Remove face plate and plug Hidden Camera
into the wall and wait about 75-90 seconds for blue
light to flash rapidly to begin set up process. If light
is not, press and hold reset button for 5 seconds and
then release and wait about 75-90 seconds for light
to start blinking rapidly. Camera is now ready to be
set up. (Replace faceplate after set up process is
complete)
3. Press the (+) symbol in the top right corner of
the app and select the Smart Camera from
the list of devices to add.
ADD THE DEVICE

4. Press the “next step” button
5. Make sure phone is connected to the Wi-Fi
network that the device will be connected to.
Enter your password for the Wi-Fi network.
6. Follow the directions in the app and hold the
QR code on the screen in front of the view of the
camera.
SINCE THE CAMERA DOES NOT HAVE A SPEAKER
YOU WILL NOT HEAR A PROMPT. When the camera
successfully reads the QR code on your screen, the blue
light will stop blinking fast and start blinking slow.
Then you can press “I Heard a Prompt” to continue.

7. Connecting process will begin. Do not turn off
Hidden Camera or phone while connecting. Wait for
connection process to complete.
8. Once device has been successfully added, name
the device what you would like it to be called in
the app. The Hidden Camera is ready for use.

APP FUNCTIONS
Live Video
To view live video simply click on the device under “All
devices” and you will see your live video at the top
immediately. Hit the full screen button in the bottom right
corner of the live video to see your live footage at full screen
on your phone.

Video Recording
To manually record video clips press the “record” button one
the main camera screen. To end recording, press “record”
button again. To view recordings, press the “Photo Album”
button. All of the video recordings and photos you take will
be here in the photo album. To view all footage that your
camera has recorded, press “Playback” in you have a micro
SD card in the camera. You can also purchase optional
cloud storage by clicking on “Cloud Storage” if you do not
have a micro SD card inserted in your camera.

Taking a Photo
To take a photo, press “screenshot” and the photo will be
saved to your phone in the photos and video section.

Motion Detection
The camera uses infrared sensors when someone/something
appears within its detection area. Push notifications will be
sent your phone once motion is detected.
To access control of motion detection press the camera
setting button at the top right. On the next page you can
select “motion detection”. From there you can turn it on/off
and set the sensitivity setting. You can also get to this from
hitting the “alarm” button on the main camera page.

Hub controls (sound, video quality, signal strength)
You can control features from the live video feed. There is a
volume button that is used to mute and unmute the live
feed(This must be set to unmute in order to record sound on
manually recorded video clips). Next to that button is the
video quality button and it can be used to switch between
standard and high definition video. In the top right, the
signal strength of the camera is shown.

Sharing the Device
To share access to your camera with someone else’s
Brookstone Smart account, press the camera settings button
at the top right of the main camera screen. Then hit “Share
Device”. On the next page press “Add Sharing” at the
bottom. After that, enter the email on the person’s
Brookstone Smart account that you would like to share the
camera with. They will get a notification to accept and after
that the other person will have access to view your camera
through the Brookstone Smart app on their phone.