Brother BAS-311E User manual

BAS-311E, 311EL, 326E, 326EL 1/41
2000.7
BAS-311E 311EL
326E 326EL
Programmable Electronic Pattern Sewer
with Cylinder Bed
Specifications BAS-311E BAS-311EL BAS-326E BAS-326EL
Machinehead Lockstitchpatterntackingsewingmachine(withlargeshuttlehook)
Application Medium,heavy,extraheavymaterials
Sewingspeed 2,500rpm(Whenstitchlengthis3mmorless)
Stitchlength 0.05- 12.7mm
SewingareaX - Y 130 ×60mm 220 ×60mm 200 ×100mm 220 ×100mm
Max.numberofstitches 20,000
Feedmechanism Steppingfeed,pulsemotordrive
Heightof workclamp Solenoidtype
25mm
Pneumatictype
30mm
Pneumatictype30mm
Steppingpresserfootliftstroke 0,3.0 (Factorysetting) -8.0 mm
No.ofstitches 20,000stitchesperpattern(max.100patterns,360,000stitches/2HDfloppydisk)
Needle DP ×5,DP ×17,MR
Minimumresolution 0.05mm
Test function Operationtestfunctionprovidedforusewithlowspeeddrive
Safetydevice Automaticstopfunctionforactivationintheeventofmisoperationrealizedwithintermediatestopfunction
andsafetycircuits
Motor Three-phase400Winductionmotor
Datastoragemethod 3.5 floppy disk 2HD /1.44 MB, 2DD
Patterneditingfunctions Line,curve,circle,arc,zigzagstitch,doublestitch,parallelstitch,offset,resizing,rotating,etc.
Powersupply Single-phase 110 V, 220 V, 230V, 240 V 3-phase 220 V, 380 V, 400 V, 600 VA
Airpressure 0.49 Mpa 1.8 l / min
Machinedimensions Standing:1,200 (W) ×590(D) ×1.350(H)mm
Sitting:1,200(W)×590 (D)×1,120(H)mm
Weight Machinehead:60kg(BAS-311E),65kg(BAS-311EL,BAS-326E,BAS-326EL)
Controlbox10-20kg(Dependingonvoltage)

BAS-311E, 311EL, 326E, 326EL2/41 2000.7
BAS-311E-
*Only pneumatic specifications are available for sewing extra heavy materials.
BAS-311EL-
BAS-326E-
Application
1Heavymaterials
2Mediummaterials
BAS-326EL22-
Application
1Heavymaterials
2Mediummaterials
*The BAS-311EL, 326E, 326EL is available in pneumatic specification only.
*For BAS-311E, 311EL, 326E, 326EL pneumatic specification, compressor type is also available.
Workclampdrive
1Solenoidtype(Unittype)
2Pneumatic type (Separate type)
Application
1Heavymaterials
2Mediummaterials
3Extraheavymaterials
Application
1Heavymaterials

BAS-311E, 311EL, 326E, 326EL 3/41
2000.7
GAUGE PARTS LIST
Presser foot [Models BAS-311E,311EL,326E, 326EL]
AS42843-001*1*2 BS42844-001 CS42845-001 DS42846-001
ES42847-001 F157237-001 G158592-001 JS42848-001
XY S42849-001*3
Needle hole plate [Models BAS-311E,311EL,326E, 326EL]
AS10211-001 DS29997-001 ES10212-101*1*2 ED S30925-001 FS10213-001*1*2
Forheavymaterials For medium materials
FD S30926-001 HS30450-001 LS25127-001 MS34348-001*1
Forextraheavymaterials
The *1 symbol is for standard part for BAS-311E & 311EL.
The *2 symbol is for standard part for BAS-326E & 326EL.
The *3 symbol is for horizontal wiper.

BAS-311E, 311EL, 326E, 326EL4/41 2000.7
One-touch work clamp (Option parts) [Models BAS-311E,311EL]
Ref.No. Partname Partcode Q’ty
1One-touchholderassy,UN S24612-001 1
3One-touchwork clampset S44794-001 1
3-1 One-touchholderassy,L S20280-101 1
3-2 One-touchholderassy,R S20286-101 1
3-3 Workclampholderassy,L S20289-101 2
3-4 Workclampholderassy,R S20293-101 2
3-5 Bolt,socketSM4.37x 8 018680-822 8
[Models BAS-326E, 326EL]
Ref.No. Partname Partcode Q’ty
3One-touchwork clampset S44414-001 1
3-1 One-touchholderassy,L S44415-001 1
3-2 One-touchholderassy,R S44417-001 1
3-3 Workclampholderassy,L S20289-101 2
3-4 Workclampholderassy,R S20293-101 2
3-5 Bolt,socketSM4.37x 8 018680-822 8

BAS-311E, 311EL, 326E, 326EL 5/41
2000.7
Work clamp [Models BAS-311E,311EL]
Ref.No. Partname Partcode Q’ty
75-3 Workclampguidebracket S42798-001 1
75-4 Workclampadjustingplate S42799-001 2
75-5 Adjustingplate S42800-001 2
75-6 Workclamp,SE-OP S42802-001 2
75-7 Screw,pan SM3.57–40 x5 062670-512 4
[Models BAS-326E, 326EL]
Ref.No. Partname Partcode Q’ty
75-3 Workclampguidebracket S42798-001 1
75-4 Workclampadjustingplate S44451-001 2
75-5 Adjustingplate S42800-001 2
75-6 Workclamp,SE-OP S44453-001 2
75-7 Screw,pan SM3.57–40 x5 062670-512 4
*These optional parts are used to prevent work clamp looseness.

BAS-311E, 311EL, 326E, 326EL6/41 2000.7
Blank for work clamp [Models BAS-311E]
Partname Partcode Q’ty
<Thick3.2mm>
Workclampblank,A–3.2 S43824-001 1
<Thick4.0mm>
Workclampblank,A–4.0 S43826-001 1
<Thick5.0mm>
Workclampblank,A–5.0 S43828-001 1
<Thick3.2mm>
Workclampblank,B–3.2 S43825-001 1
<Thick4.0mm>
Workclampblank,B–4.0 S43827-001 1
<Thick5.0mm>
Workclampblank,B–5.0 S43829-001 1
<Thick6.0mm>
Workclampblank,–6.0 S43830-001 1

BAS-311E, 311EL, 326E, 326EL 7/41
2000.7
Blank for work clamp [Models BAS-311EL]
Partname Partcode Q’ty
<Thick3.2mm>
Workclampblank,A–3.2L311L S45604-001 1
<Thick4.0mm>
Workclampblank,A–4.0L311L S45608-001 1
Forleft
<Thick5.0mm>
Workclampblank,A–5.0L311L S45612-001 1
<Thick3.2mm>
Workclampblank,A–3.2R311L S45605-001 1
<Thick4.0mm>
Workclampblank,A–4.0R311L S45609-001 1
Forright
<Thick5.0mm>
Workclampblank,A–5.0R311L S45613-001 1
<Thick3.2mm>
Workclampblank,B–3.2L311L S45606-001 1
<Thick4.0mm>
Workclampblank,B–4.0L311L S45610-001 1
<Thick5.0mm>
Workclampblank,B–5.0L311L S45614-001 1
Forleft
<Thick6.0mm>
Workclampblank,6.0L311L S45616-001 1
<Thick3.2mm>
Workclampblank,B–3.2R311L S45607-001 1
<Thick4.0mm>
Workclampblank,B–4.0R311L S45611-001 1
<Thick5.0mm>
Workclampblank,B–5.0R311L S45615-001 1
Forright
<Thick6.0mm>
Workclampblank,6.0R311L S45617-001 1

BAS-311E, 311EL, 326E, 326EL8/41 2000.7
Blank for work clamp [Models BAS-326E]
Partname Partcode Q’ty
<Thick3.2mm>
Workclampblank,SEA –3.2 S44391-001 1
<Thick4.0mm>
Workclampblank,SEA –4.0 S44393-001 1
<Thick5.0mm>
Workclampblank,SEA –5.0 S44395-001 1
<Thick3.2mm>
Workclampblank,SEB–3.2 S44392-001 1
<Thick4.0mm>
Workclampblank,SEB–4.0 S44394-001 1
<Thick5.0mm>
Workclampblank,SEB–5.0 S44396-001 1
<Thick6.0mm>
Workclampblank,SEB-6.0 S44397-001 1
<Thick3.2mm>
Workclampblank,UNA–3.2 S44398-001 1
<Thick4.0mm>
Workclampblank,UNA–4.0 S44400-001 1
<Thick5.0mm>
Workclampblank,UNA–5.0 S44402-001 1
<Thick3.2mm>
Workclampblank,UNB–3.2 S44399-001 1
<Thick4.0mm>
Workclampblank,UNB–4.0 S44401-001 1
<Thick5.0mm>
Workclampblank,UNB–5.0 S44403-001 1
<Thick6.0mm>
Workclampblank,UNB-6.0 S44404-001 1

BAS-311E, 311EL, 326E, 326EL 9/41
2000.7
Blank for work clamp [Models BAS-326EL]
Partname Partcode Q’ty
<Thick3.2mm>
Workclampblank,SEA –3.2 S51051-001 1
<Thick4.0mm>
Workclampblank,SEA –4.0 S51053-001 1
<Thick5.0mm>
Workclampblank,SEA –5.0 S51055-001 1
<Thick6.0mm>
Workclamp blank,SE A- 6.0 S51057-001 1
<Thick3.2mm>
Workclampblank,SEB–3.2 S51052-001 1
<Thick4.0mm>
Workclampblank,SEB–4.0 S51054-001 1
<Thick5.0mm>
Workclampblank,SEB–5.0 S51056-001 1
<Thick6.0mm>
Workclampblank,SEB-6.0 S51058-001 1
<Thick3.2mm>
Workclampblank,UNA–3.2 S51059-001 1
<Thick4.0mm>
Workclampblank,UNA–4.0 S51061-001 1
<Thick5.0mm>
Workclampblank,UNA–5.0 S51063-001 1
<Thick6.0mm>
Workclampblank,UNA-6.0 S51065-001 1
<Thick3.2mm>
Workclampblank,UNB–3.2 S51060-001 1
<Thick4.0mm>
Workclampblank,UNB–4.0 S51062-001 1
<Thick5.0mm>
Workclampblank,UNB–5.0 S51064-001 1
<Thick6.0mm>
Workclampblank,UNB-6.0 S51066-001 1

BAS-311E, 311EL, 326E, 326EL10/41 2000.7
One-touchcassetteclamp assy [Models BAS-311E]
Partname Partcode Q’ty
<Thick0.5mm>
Cassetteclampassy,OT311 S43691-001 1
<Thick1.0mm>
Cassetteclampassy,OT311 S43691-002 1
<Thick2.0mm>
Cassetteclampassy,OT311 S43691-003 1
[Models BAS-311EL]
Partname Partcode Q’ty
<Thick0.5mm>
Cassetteclampassy,OT311L S45591-001 1
<Thick1.0mm>
Cassetteclampassy,OT311L S45593-001 1
<Thick2.0mm>
Cassetteclampassy,OT311L S45595-001 1
[Models BAS-326E]
Partname Partcode Q’ty
<Thick0.5mm>
Cassetteclampplateassy,326-OT S44374-001 1
<Thick1.0mm>
Cassetteclampplateassy,326–OT S44376-001 1
<Thick2.0mm>
Cassetteclampplateassy,326-OT S44378-001 1
[Models BAS-326EL]
Partname Partcode Q’ty
<Thick0.5mm>
Cassetteclampplateassy,326-OT S51067-001 1
<Thick1.0mm>
Cassetteclampplateassy,326–OT S51069-001 1
<Thick2.0mm>
Cassetteclampplateassy,326-OT S51071-001 1

BAS-311E, 311EL, 326E, 326EL 11/41
2000.7
For feed plate attachment [Models BAS-311E]
Partname Partcode Q’ty
<Thick1.2mm>
Feedplateblank,A311 S43697-001 1
<Thick1.2mm>
Feedplateblank,B311 S43698-001 1
<Thick1.2mm>
Feedplateblank,C311 S43699-001 1
Feedplateinnerplate S43823-001 1
Feedplatesettingbracket S12586-001 1

BAS-311E, 311EL, 326E, 326EL12/41 2000.7
For feed plate attachment [Models BAS-311EL]
Partname Partcode Q’ty
<Thick1.2mm>
Feedplateblank,A311L S45597-001 1
<Thick1.2mm>
Feedplateblank,B311L S45598-001 1
<Thick1.2mm>
Feedplateblank,C311L S45599-001 1
Feedplateinnerplate S45603-001 1

BAS-311E, 311EL, 326E, 326EL 13/41
2000.7
For feed plate attachment [Models BAS-326E]
Partname Partcode Q’ty
<Thick1.2mm>
Feedplateblank,326A S44405-001 1
<Thick1.2mm>
Feedplateblank,326B S44406-001 1
<Thick1.2mm>
Feedplateblank,326C S44407-001 1
Feedplateinnerplate S44390-000 1

BAS-311E, 311EL, 326E, 326EL14/41 2000.7
For feed plate attachment [Models BAS-326EL]
Partname Partcode Q’ty
<Thick1.2mm>
Feedplateblank,326A S51045-001 1
<Thick1.2mm>
Feedplateblank,326B S51046-001 1
<Thick1.2mm>
Feedplateblank,326C S51047-001 1
Feedplateinnerplate S48555-000 1

BAS-311E, 311EL, 326E, 326EL 15/41
2000.7
Work clamp [Models BAS-311E]
Ref.No. Partname Partcode Q’ty
6Workclamp,R311 S42772-001 1
7Workclamp,L311 S42773-001 1
8Washer,plain M4.37 025680-232 2
9Bolt,SM4.37 x7 153403-002 2
10 Positioningplate S10065-001 2
11 Screw,panSM4.37-40x5 062680-512 2
202 Workclamp,UN S43986-001 1
203 Workclamp,311UN S43987-001 1
[Models BAS-311EL]
Ref.No. Partname Partcode Q’ty
6Workclamp,R311L S44614-001 1
7Workclamp,L311L S44613-001 1
8Washer,plain M4.37 025680-232 2
9Bolt,SM4.37 x7 153403-002 2
10 Positioningplate S10065-001 2
11 Screw,panSM4.37-40x5 062680-512 2

BAS-311E, 311EL, 326E, 326EL16/41 2000.7
Work clamp [Models BAS-326E]
Ref.No. Partname Partcode Q’ty
6Workclamp,R326 S44431-001 1
7Work clamp, L 326 S44432-001 1
8Washer,plain M4.37 025680-232 2
9Bolt,SM4.37 x7 153403-002 2
10 Positioningplate S10065-001 2
5Workclamp,UN326 S44448-001 1
Work clamp [Models BAS-326EL]
Ref.No. Partname Partcode Q’ty
6Workclamp,R326 S51030-001 1
7Work clamp, L 326 S51031-001 1
8Washer,plain M4.37 025680-232 2
9Bolt,SM4.37 x7 153403-002 2
10 Positioningplate S10065-001 2
5Workclamp,UN326 S51042-001 1
For one-touch work clamp [Models BAS-311E,311EL,326E, 326EL]
Partname Partcode Q’ty
OT–feedplatebracketassy S14841-001 1

BAS-311E, 311EL, 326E, 326EL 17/41
2000.7
Feed plate blank for one-touch work clamp [Models BAS-311E]
Partname Partcode Q’ty
<Thick1.2mm>
OT–feedplateblank,A S43700-001 1
<Thick1.2mm>
OT–feedplateblank,B S43821-001 1
<Thick1.2mm>
OT–feedplateblank,C S43822-001 1
[Models BAS-311EL]
Partname Partcode Q’ty
<Thick1.2mm>
OT–feedplateblank,A311L S45600-001 1
<Thick1.2mm>
OT–feedplateblank,B311L S45601-001 1
<Thick1.2mm>
OT–feedplateblank,C311L S45602-001 1

BAS-311E, 311EL, 326E, 326EL18/41 2000.7
Feed plate blank for one-touch work clamp [Models BAS-326E]
Partname Partcode Q’ty
<Thick1.2mm>
OT–feedplateblank,A S44408-001 1
<Thick1.2mm>
OT–feedplateblank,B S44409-001 1
<Thick1.2mm>
OT–feedplateblank,C S44410-001 1
Feed plate blank for one-touch work clamp [Models BAS-326EL]
Partname Partcode Q’ty
<Thick1.2mm>
OT–feedplateblank,A S51048-001 1
<Thick1.2mm>
OT–feedplateblank,B S51049-001 1
<Thick1.2mm>
OT–feedplateblank,C S51050-001 1

BAS-311E, 311EL, 326E, 326EL 19/41
2000.7
For sewing the bar tack “61.5 x 86.5”[Models BAS-311E,311EL]
Ref.No. Partname Partcode Q’ty
159 Workclamp,SR S14254-001 1
160 Workclamp,SL S14255-002 1
163 OT–workclampassy,D S14846-003 2
164 Screw,flangeSM4.37 149168-001 2
Feed plate for one-touch work clamp [Models BAS-311E,311EL]
Partname Partcode Q’ty
Fordenim
<Thick1.2mm>
OT–feedplateblank,DE S14253-001 1
Forgeneral
<Thick1.2mm>
OT–feedplate S14252-001 1

BAS-311E, 311EL, 326E, 326EL20/41 2000.7
For one-touch work clamp
For basting the vent [Models BAS-311E,311EL]
Ref.No. Partname Partcode Q’ty
165 Feedplate S13092-001 1
166 Workclamp,R S13090-001 1
167 Workclamp,L S13091-001 1
For attaching the thread loop [Models BAS-311E,311EL]
Ref.No. Partname Partcode Q’ty
168 Feedplate S13098-001 1
169 Workclamp,R S13096-001 1
170 Workclamp,L S13097-001 1
For sewing the bar tack “23 x 6”[Models BAS-311E,311EL]
Ref.No. Partname Partcode Q’ty
171 Workclamp,R311-004 S23818-001 1
172 Workclamp,L311-004 S23819-001 1
173 Feedplate,311-004 S23820-001 1
For sewing the bar tack “10.4 x 4.4”[Models BAS-311E,311EL]
Ref.No. Partname Partcode Q’ty
174 Workclamp, R311–005 S23821-001 1
175 Workclamp, L311–005 S23822-001 1
176 Feedplate,311-005 S23823-001 1