Brother BE-0901E PC Parts list manual

1
REPLACING HEAD BOARD
1. Make sure machine is OFF and Unplugged.
2. Remove cover assy. (Six screws removed “A”, Three loosened “B”)
3. Identifying Main Bord. (Also: Power Supply, and Head Board)
A
A
A A A
A
B
Power Supply
Main Board
Head Board Main Board
Head Board
Power Supply
B BE ES S- -9 91 16 6, ,9 90 01 1, ,1 12 21 16 6, ,1 12 20 01 1
For Technical Assistance Please Call Toll Free 1-877-4BROTHER

2
REPLACING HEAD BOARD
4. Unplugging all wire connector harnesses. P1, P2, P3, P4, P5, P6, P7, P8, P9, P10, P11 and
P12.
5. Unplug all connectores to remove board. However, keep in mind that connectors only go
in one spot and can not be confused.
6. Board is held inplace by plastic clip locks. In order to unlock you will need to squeese
locks and lightly pull-up on board to release.
(Fig. 1-1)
Four-clip locks
hold board down.
plastic clip locks plastic clip locks
B BE ES S- -9 91 16 6, ,9 90 01 1, ,1 12 21 16 6, ,1 12 20 01 1A AC C
For Technical Assistance Please Call Toll Free 1-877-4BROTHER

3
REPLACING HEAD BOARD
7. Once you remove the old board you are ready to install the new one.
A. Installing board - Please follow reverse instructions on removal.
8. After board is installed and all plugged in you will need to up-grade software accordance
to model of machine. (For up-grading machine please follow up-grade procedure form)
A. 916 Model 0901EM-367.bup
0901EP-367.bup
0901ES-367.bup
B. 1216 Model
1201BM-367.bup
1201BP-367.bup
1201BS-367.bup
9. After board is installed, machine is up-graded and restarted you are ready for operation
and checks.
(Questions or concerns please contact technical support: 1-877-427-6843.)
Note. As times pass software versions may change with out notice.
B BE ES S- -9 91 16 6, ,9 90 01 1, ,1 12 21 16 6, ,1 12 20 01 1A AC C
For Technical Assistance Please Call Toll Free 1-877-4BROTHER