C Prox CPWIFISW1 User manual

11 Callywhite Business Park, Callywhite Lane, Dronfield S18 2XP
[phone] [email protected] www.quantek.co.uk
CPWIFISW1
WiFi Smart Switch Manual
Features:
•Connects to home WiFi
•Turn devices on and off remotely through the App
•Manage numerous smart switches and other Tuya compatible smart devices from
one App
•Compatible with Amazon Alexa, Google Assistant & Siri (via Shortcuts)
•Set schedules and timers
•Switch device on automatically when you get home (Beta)
•Share access with other users permanently or for a set time period
•Remove access to other users instantly
•Latching or timed mode
•Group device management
•Built in 433.92MHz receiver for remote controls
Specification:
•Input voltage: 7-32Vac/dc or 5V Micro-USB
•Max current load: 10A
•WiFi standard: 2.4GHz, 802.11 b/g/n
•Standby/max current draw: 80mA/115mA
•Dimensions: 73 x 46 x 30mm

Device setup
1. Download the ‘Smart Life’ App by searching in the mobile App stores or
scanning the following QR codes.
2. Create an account in the App, or if you already have an account just login.
3. Supply power to the WiFi switch and wire the relay output to the device you
are controlling.
Reset
Manual switch
External switch interface
Network indicator

Wiring examples
4. Power on the device.
5. Reset the device by pressing the match button for 5 seconds until the red
network LED indicator is flashing quickly every 0.5 seconds (if the network
indicator is already flashing quickly, skip this step).
Light
Set mode to latching
Gate
Set output to inching
mode - 2 secs
Refer to gate panel
manual for Start terminals

6. Add & connect the device in the App
Tap ‘+’ then ‘Add Device’
After a few seconds the device
will be found, tap ‘Add’
Tap ‘+’
Select a 2.4GHz WiFi network,
enter your password and click
‘Next’.
7. Name the device.
8. When the network is disconnected, the switch will automatically change to
Bluetooth control from the phone. (Must be within range).
9. Click the On/Off button on the App to switch the relay and control the device.

App functions
1. Set the following:
Countdown (delay before the output activates)
Weekly schedules (up to 8 per device)
Circulate (set the device to switch on and off on a loop)
Random
Inching (set the output timed) Set to 2 seconds when connecting to a gate, door, garage, etc.
Tap here to enter
function operation
interface.
1. Countdown
Schedule
Circulate
Random
Inching
2. Relay status
RF remote control setup
3. Rename
Offline notification
Third-party control
Share Device
Create group
Remove device

2. Set the following:
Relay status (when the device is switched back on after losing power)
RF remote control setup
Tap Add
When prompted, press the remote control button you want to add within 10 seconds
The message ‘Add Success’ will be displayed
To delete a remote control, swipe it to the left and tap delete
3. Edit device name & location.
Manage third party control, setup Alexa etc.
Share device with other users.
Create a group to control more than one device by a single tap.
Share device with other users
Other users must have a Smart Life account
Tap ‘Share Device’
Tap ‘Add Sharing’
Tap ‘Share with the Account
Smart Life’.
Enter the email or phone number
of the account you want to share
with and click ‘Done’
Tap on the name of the account
you have shared with
Then you can set a validity
period (if required) or unshare
the device

Create smart scenes and setup Siri
Tap ‘Scene’ then ‘+’ or ‘Create
Scene’
Tap ‘Launch Tap-to-Run’
Tap ‘+’
Tap ‘Run the Device’
Select the appropriate switch
Select the name of switch again,
select ‘ON’ and then tap ‘Save’
followed by ‘Next’
Tap the 3 dots to rename the
scene then tap ‘Save’
Tap ‘Add to Siri’

Select the scene
Tap ‘Change Voice Phrase’ and
enter the desired phrase
Tap ‘Done’
Please note, to use with Siri on other phones, you must share the ‘Home’ with other accounts, rather
than just the device.
Tap ‘Me’ > ‘Home Management’ > Select the name of the Home > ‘Add Member’
Please also make sure that the ‘Shortcuts’ App is downloaded on the phone.

Setup Alexa
Link Alexa and Smart Life Apps.
You may need to login to
Amazon/Alexa.
In the Alexa App, tap ‘Devices’
then scroll across to ‘All Devices’
Tap the name of the switch
Tap ‘Create a Routine’
Tap the ‘+’

Name the routine. Then tap
‘When this Happens’
Tap ‘Voice’ and enter the
desired voice command. Then
tap ‘Next’
Tap ‘Add Action’
Tap ‘Smart Home’
Tap ‘All devices’
Tap the name of the switch
Tap ‘Power – ON’ then ‘Next’
Save your routine

Switch the device automatically when you get to a location
Please note this feature is a Beta service and requires location services to be on all the time.
Tap ‘Scene’ then ‘+’ or ‘Create
Scene’
Tap ‘When location changes’.
Tap ‘Arrive’.
Select location. Zoom in or out to
adjust activation radius. Tap ‘OK’.
Tap ‘+’
Tap ‘Run the Device’
Select the appropriate switch
Select the name of switch again,
select ‘ON’ and then tap ‘Save’
followed by ‘Next’

Tap the 3 dots
Rename the scene and choose
the effective period (if required)
Choose and tap ‘Next’
Tap ‘Save’