Allied Telesis AT-8000S/24POE User manual

Allied Telesis www.alliedtelesis.com
Datasheet | Switches
AT-8000S/24POE
Layer 2 Stackable Fast Ethernet Switch
A
T-8000S/24POE
24-port stackable 10/100TX Power over
Ethernet switch with 2 active SFP bays
(unpopulated) and 2 standby 10/100/1000T
ports (RJ-45)
Overview
One of a series of stackable switches from
Allied Telesis, the AT-8000S/24POE provides
high performance Layer 2 switching in an
affordable fixed configuration platform
combined with Power over Ethernet to provide
power to edge devices including IP Phones and
wireless access points.This switch offers 24
10/100 ports, two fixed SFP Combo slots plus
two integrated stacking connectors that deliver
a total of 4Gbps stacking bandwidth.The
stacking capability integrated into this platform
is configured as a resilient ring topology
designed to provide high reliability and
simplified management for higher port density
applications.
Combined Ethernet and Power for
Branch Office and
Wiring Closet
Connectivity
Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices where power is
needed for remote devices.The state-of-the-art
QoS capability of this product ensures reliable
delivery of advanced network services such as
voice while effectively controlling the continually
increasing traffic needs found in today’s networks.
Easy Access Networking
Featuring an industry standard CLI and Allied
Telesis’ intuitive yet fully featured WEB interface
the advanced features of the AT-8000S/24POE
are accessible to a wide range of system
administrators.The well known CLI and WEB
interfaces significantly reduce learning time and
minimize the cost of deployment.
Secure Management
Only authorized administrators can access the
management interface of the AT-8000S series.
Protocols such as SSL, SSH and SNMP v3
facilitate this protection of your network with
local or remote connections.
Securing the Network Edge
To ensure the protection of your data, it is
important to control access to your network.
Protocols such as 802.1x port based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a pre-
determined part of your network offering guests
such benefits as Internet access while ensuring
the integrity of your private network data.
Key Features
Easy,Well Known Management
•Industry Standard CLI
•Simple intuitive, fully featured Allied Telesis
Web Interface
•Secure encrypted WEB and CLI management
with SSH v2 and SSL
•SNMP
Power over Ethernet
•Provides standards based 802.3af
Power over Ethernet to all 24 10/100 ports
•Support for up to 24 class 2 Powered
devices at 7.3 watts
•Support for up to 11 class 3 Powered
devices at 15.4 watts
Affordable Truly Stackable 10/100 Switching
Platform
•Single IP address Stack management
•4Gig Resilient Ring Stacking Architecture
•Across Stack Link Aggregation
•Across Stack VLAN configuration
•Across Stack Port Mirroring
•Redundant standby stack master
All the QoS needed in the wiring closet for
today’s Voice and Data Networking
•8 Priorities assigned to 4 queues
•802.1p for Layer 2 QoS
•DSCP (Diffserv) for Layer 3 QoS
•802.1p to DSCP remarking traffic ready for
transport to the Layer 3 core of the network
Securing the Network at its most vulnerable
point
•802.1x and RADIUS network login: for
advanced control of user authentication
and accountability
•Guest
VLAN: to ensure visitors or unauthorized
users connect only to
services defined by IT.E.g.Internet
•TACACS+: for ease of management
security administration

Allied Telesis www.alliedtelesis.com
AT-8000S/24POE | Layer 2 Stackable Fast Ethernet Switch
System Configuration
W x D x H 440mm x 257mm x 44mm
(17.32” x 10.11” x 1.76”)
Weight 3.7kg
Mounting 19” rack-mountable hardware
included
System Capacity
64MB RAM
16MB Flash Memory
400Mhz CPU
Up to 4,096 VLAN ID
8,000 MAC address
Performance
Wire speed switching on all Ethernet ports
14,880pps for 10Mbps Ethernet
148,800pps for 100Mbps fast Ethernet
1,448,000pps for 1000Mbps Gigabit Ethernet
Ethernet throughput 9.5Mpps
Chipset switching capacity 12.8Gbps
MTBF 252,271.22 hours
Store and forward mode
Non blocking switch fabric
Auto-MDI/MDI-X
Port speed
10/100-TX RJ-45
10/100/1000TX RJ-45
100-FX, 1000-SX, 1000-LX SFP slot
RS232 DB9 pin, male port
Internal power supply
Power over Ethernet
Total Power Budget 225W
For Switch 12V/ 45W
POE Budget 50V/ 180W
POE Max supported 802.3af class 3 devices (15.4W):
11 ports
POE Max supported 802.3af class 2 devices (7.3W):
24 ports
Interface Standards
802.3 10Base-T & 10Base-FL
802.3u 100Base-TX & 100base-FX
802.3z 1000base-SX
802.3ab 1000Base-T
General Standards
802.1d Bridging
802.3x BackPressure/ Flow Control
Redundancy Standards
802.1D Spanning Tree Protocol
802.1W Rapid Spanning Tree
802.1s Multiple Spanning Tree
802.3ad LACP Link Aggregation
(with up to eight members per
group and up to eight groups per
device)
Static port trunk
Quality of Services (QoS)
QoS in layer 2 (802.1p compliant Class of Service)
Traffic prioritization using 802.1p, ToS,DSCP fields
Map 802.1p priorities to CoS queues to prioritize traffic
at Egress.
Strict Scheduling and Weighted Round Robin
VLANs
IEEE 802.1Q VLAN Tagging
Up to 256 VLANs
Port-based VLANs
MAC-based VLANs
Private VLANs
GARP VLAN Registration Protocol (GVRP)
IEEE 802.3ac
Multicast Standards
RFC 1112 IGMP snooping (ver. 1)
RFC 2236 IGMP snooping (ver. 2)
RFC 3376 IGMP snooping (ver. 3)*
*Future release
Management and Monitoring
WEB, CLI, Serial
RFC 1157 SNMPv1/v2c
RFC 2570 SNMPv3
RFC 1213 MIB-II
RFC 1215 TRAP MIB
RFC 1493 Bridge MIB
RFC 2863 Interfaces group MIB
RFC 1643 Ethernet like MIB
RFC 1757 RMON 4 groups: Stats, History,
Alarms, Events
RFC 2674 802.1Q MIB
RFC 1866 HTML
RFC 2068 HTTP
RFC 854 Telnet
RFC 783 TFTP
IP address allocation
RFC 951/ RFC 1542 BootP/ DHCP
Manual
RFC 2030 SNTP,Simple Network Time Protocol
Syslog Event
Dual Software Images
Stacking
Up to six units
Single chip appearance
Single IP management
Backup master
Full duplex link with 2Gbps performance
Trunking across stack
Port mirroring across stack
VLAN across stack
Security
Management Security: user name and password
protection
SSHv2 Telnet management
SSLv3 WEB management
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
IEEE 802.1x Port-based network access control
Guest VLANs
Fault Protection
Broadcast Storm Control

USA Headquarters |19800 North Creek Parkway |Suite 200 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 Tai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
© 2006 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000180 Rev. E
AT-8000S/24POE | Layer 2 Stackable Fast Ethernet Switch
Power Characteristics
Voltage Input 100-240VAC
Voltage Output 48VDC
Current 1.5A
Heat Dissipation 768.3 BTU/hour
Clock Frequency 166Mhz
Environmental Specifications
Operating Temp 0°C to 45°C (32°F to 113°F)
Storage Temp -25°C to 70°C (-13°F to 158°F)
Relative Humidity 10% to 90% non-condensing
Storage Humidity 5% to 95% non-condensing
Operating Altitude maximum 3,000m (9,843ft)
Electrical/ Mechanical Approvals
Safety UL 1950 (UL/cUL), EN60950 (TUV)
EMI FCC Class A, EN55022 Class A,
VCCI Class A, C-Tick,
EN61000-3-2, EN61000-3-3
Immunity EN55024
RoHS compliant
Package Description
One AT-8000S/24POE switch
Power cord AC
Rackmount kit
Rubber feet for desktop installation
RS232 management cable
Stacking cable
User guide in CD
Limited Lifetime warranty card
Country of Origin
China
Ordering Information
AT-8000/24POE-xx
24-port stackable 10/100TX POE L2 switch with 2
active SFP bays (unpopulated) and 2 standby
10/100/1000T ports (RJ-45)
Where xx = 10 for US Power cord
20 for no power cord
30 for UK power cord
40 for Australian power cord
50 for European power cord