Cadillac GPS Receiver User manual

2011 Cadillac STS Navigation System M
Infotainment System . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . 3
Overview . . . . . . . . . . . . . . . . . . . . . . . 4
Radio ....................... 13
AM-FM Radio . . . . . . . . . . . . . . . . . 13
Satellite Radio . . . . . . . . . . . . . . . . 20
Audio Players . . . . . . . . . . . . . . 22
CD/DVD Player . . . . . . . . . . . . . . . 22
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Auxiliary Devices . . . . . . . . . . . . . . 33
Navigation . . . . . . . . . . . . . . . . . . 34
Using the Navigation
System . . . . . . . . . . . . . . . . . . . . . . 34
Maps . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Navigation Symbols . . . . . . . . . . . 39
Navigation Menu . . . . . . . . . . . . . . 47
Destination .................... 62
OnStar
®
System . . . . . . . . . . . . . . 77
Configure Menu . . . . . . . . . . . . . . . 79
Global Positioning
System (GPS) . . . . . . . . . . . . . . . 86
Vehicle Positioning . . . . . . . . . . . . 87
Problems with Route
Guidance . . . . . . . . . . . . . . . . . . . . 88
If the System Needs
Service . . . . . . . . . . . . . . . . . . . . . . 89
Ordering Map DVDs . . . . . . . . . . 89
Database Coverage
Explanations . . . . . . . . . . . . . . . . . 89
Voice Recognition . . . . . . . . . . 89
Personalization . . . . . . . . . . . 100
Phone ..................... 100
Bluetooth . . . . . . . . . . . . . . . . . . . . 100
Index ..................... i-1

Infotainment System 3
Introduction
GENERAL MOTORS, GM, the GM
Emblem, CADILLAC, the CADILLAC
Crest & Wreath, and the name STS
are registered trademarks of
General Motors LLC.
DTS and DTS Digital surround are
registered trademarks of Digital
Theater systems, Inc.
Dolby
®
is manufactured under
license from Dolby
®
Laboratories.
Dolby
®
, MLP Lossless, and the
double-D symbol are trademarks of
Dolby
®
Laboratories.
The information in this manual
supplements the owner manual.
This manual describes features that
may or may not be on your specific
vehicle either because they are
options that you did not purchase or
due to changes subsequent to the
printing of this owner manual.
Please refer to the purchase
documentation relating to your
specific vehicle to confirm each of
the features found on your vehicle.
For vehicles first sold in Canada,
substitute the name “General
Motors of Canada Limited”for
Cadillac Motor Division wherever it
appears in this manual.
Keep this manual with the owner
manual in the vehicle, so it will be
there if it is needed. If the vehicle is
sold, leave this manual in the
vehicle.
Litho in U.S.A.
Part No. 20954289 A First Printing ©2010 General Motors LLC. All Rights Reserved.

4 Infotainment System
Canadian Vehicle Owners
(Propriétaires des Véhicules
Canadiens)
A French language copy of this
manual can be obtained from your
dealer or from:
On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l'adresse
suivante:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
1-800-551-4123
Numéro de poste 6438 de langue
française
www.helminc.com
Overview
Read this manual thoroughly to
become familiar with how the
navigation system operates.
The navigation system includes
navigation and audio functions.
While entering the vehicle or when
turning the vehicle off, some DVD
Map Disc noise is normal.
Keeping your eyes on the road and
your mind on the drive is important
for safe driving. The navigation
system has built-in features
intended to help keep your eyes on
the road and mind on the drive.
Some features may be disabled
while driving. Note that these
functions will be grayed-out.
A grayed-out function indicates it is
not available when the vehicle is
moving.
All functions are available when the
vehicle is parked. Do the following
before driving:
.Become familiar with the
navigation system operation,
control buttons on the faceplate,
and touch-sensitive screen
buttons of the navigation
system.
.Set up the audio by presetting
favorite stations, setting the
tone, and adjusting the
speakers.
.Set up the navigation features
before beginning driving, such
as entering an address or a
preset destination.
.Set up your phone numbers in
advance so they can be called
easily with the press of a single
button or a single voice
command (for navigation
systems equipped with phone
capability).

Infotainment System 5
{WARNING
Taking your eyes off the road too
long or too often while using the
navigation system could cause a
crash resulting in injury or death
to you or others. Focus your
attention on driving.
{WARNING
Avoid looking too long or too
often at the moving map on the
navigation screen. This could
cause a crash and you or others
can be injured or killed. Use the
turn-by-turn voice guidance
directions whenever possible.
Use the navigation system to:
.Plan a route.
.Select a destination using
various methods and choices.
.Follow turn-by-turn route and
map guidance with voice
prompts, only if permitted by
traffic laws, controls, and
conditions.
You should always be alert and
obey traffic and roadway laws and
instructions, regardless of the
guidance from the navigation
system. Because the navigation
system uses street map information
that does not include all traffic
restrictions or the latest road
changes, it may suggest using a
road that is now closed for
construction or a turn that is
prohibited by signs at the
intersection. Because the system
uses limited information, you must
always evaluate whether following
the system's directions is safe and
legal for the current conditions.
When the navigation system is
turned on, a screen may appear
with the information below, and you
must read and acknowledge the
information it contains.
{WARNING
Taking your eyes off the road for
extended periods could cause a
crash resulting in injury or death
to you or others.
To help avoid a crash in which you
or others could be killed:
.Always concentrate on your
driving first by keeping your eyes
and mind on the road, and your
hands on the wheel.
.Follow system directions only if
permitted by traffic laws,
controls, and conditions.

6 Infotainment System
.Before using this system, read
the owner's manual and learn
how it operates.
.Some system controls cannot be
used the when vehicle is
moving.
After you acknowledge the start up
information you will be able to
access the NAV (navigation) and
DEST (destination) functions. Once
accessed, you can enter or delete
information in the navigation system
or access other functions. See
instructions later in this section.
Every fifty times the vehicle is
started and the navigation system is
turned on, the Warning screen
appears. After reading the warning,
select OK to load the map DVD
information. If OK is not selected, all
control buttons except for NAV
(Navigation) and DEST
(Destination) can be accessed. You
can also press the NAV control
button to have this Warning screen
appear.
When getting started, set the
navigation system to your
preference or delete information you
may have entered using various
options.

Infotainment System 7
A. Audio Status Line
B. Audio Source Screen.
C. North Up/Heading Up Symbol.
D. No GPS Symbol.
E. Navigation Menu Symbol.
F. Map Scales.
G. Guidance Window Symbol.
H. Z(Map DVD Eject).
I. Map DVD Loading Slot.
J. M(CD/DVD Changer Loading).
K. Z(CD/DVD Changer Eject).
L. CD/DVD Changer Loading Slot.
M. On(Power/Volume).
N. ¦m¥(Navigation Screen
Tilt) Key (in/out).
O. Clock.
P. Memory Point Symbol.
Q. POI Symbol (Point of Interest).
R. BAND.
S. AUX (Auxiliary).
T. ROUTE.
U. )(Map).
V. w(Tune).
W. SRCE (Source).
X. e(Audio).

8 Infotainment System
Y. CONFIG.
Z. k(Navigation Voice Prompt
Repeat).
AA. ¦t u ¥(Seek/Scan).
Deleting Personal Information
This navigation system can record
and store destinations. At times,
such as the disposal of your vehicle,
you may want to delete these
destinations. Refer to the following
sections to delete the destination
information that has been stored.
See “Memory Points”under
Navigation Menu on page 47 for
deleting stored destinations.
Storing Radio Station Presets
To set preset radio stations:
1. Press O/nto turn the
system on.
2. Press BAND.
3. Select the desired band (AM,
FM1, FM2, XM1, or XM2
(if equipped)).
4. Seek, scan, or tune to the
desired stations using the seek
and scan arrows or the
tuning knob.
5. Press and hold one of the six
preset screen buttons, at the
bottom of the screen, until a
beep is heard or see the station
displayed on the selected preset
button.
6. Repeat the steps for each
preset.
See “Preset Stations”under AM-FM
Radio on page 13 and Satellite
Radio on page 20 for more
information.
Setting the Clock
To set the time:
1. Press O/nto turn the
system on.
2. Press CONFIG.
3. Press H.
4. Select the 12hour or 24hour
screen button to display the time
in standard or military time.
5. Select AM or PM.
6. Select the appropriate
time zone.
7. Select the Daylight Saving Time
button, if necessary.
8. Press and hold the hour and
minute arrows to increase or to
decrease the time or press the
GPS TIME button to reset radio
time to GPS time.

Infotainment System 9
The radio uses the GPS satellite to
set the time. The vehicle needs to
be in an open area to receive the
signal. See “Clock”under Configure
Menu on page 79 for more
information.
Setting the Region, Entering
an Address and Point of
Interest, and Storing a Home
Destination and Preset
Destinations
Before entering an Address, Point of
Interest, Home, or Preset
Destination, select the appropriate
region that contains the final
destination. The vehicle must be
stopped to perform this operation.
Setting the Region
To set the region:
1. Press O/nto turn the
system on.
2. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 36 for more
information.
A notice may appear. Press
the I agree screen button to
proceed.
3. Press ROUTE.
4. Press the Region screen button.
5. Select the appropriate region
numbered screen button that
contains the final destination.
The system returns to the
DESTINATION ENTRY screen. See
“Region”under Destination on
page 62 for more information.
Entering an Address
To set a destination by entering a
street address:
1. Press O/nto turn the
system on.
2. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 36 for more
information.
A notice may appear. Press
the I agree screen button to
proceed.
3. Press ROUTE. Verify that the
selected Region is correct.
4. Press C(Address).

10 Infotainment System
5. Enter the street name using the
alpha keypad on the screen.
Do not enter directional
information or street type, and
use the space symbol screen
button (U) between street or
city names. For example, the
street name N. Royal Oak Rd.
should be entered as
royalUoak. Use the
backspace (V) screen button if
an incorrect character has been
entered.
6. Select the desired street name
with the correct designation
(Dr., Ln., St., etc.) from the list.
7. If there is more than one city, the
system displays the list of cities
that have a street with that
name. Select a city from the list.
8. Enter the house number using
the numeric keypad on the
screen and press OK.
A map screen appears with the
destination marked.
9. Select h(Destination) symbol.
10. Select Guide.
11. Once driving begins, an audio
prompt to “Proceed to the
highlighted route”is heard. The
vehicle is now in route
guidance mode.
See “Address”under Destination on
page 62 for more information.
Entering a Point of Interest (POI)
To set a destination by entering a
Point of Interest (POI):
1. Press O/nto turn the
system on.
2. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 36 for more
information.
A notice may appear. Press
the I agree screen button to
proceed.
3. Press ROUTE. Verify that the
selected Region is correct.
4. Press i(POI).
5. Enter the specific title of the
POI in the name space (i.e.
Washington Monument) using
the alpha keypad on the screen.
6. Select the POI from the list.
7. If there is more than one city, the
system displays the list of cities
that have a street with that
name. Select a city from the list
or select the Input Name screen
button to input the city name.
A map screen appears with the
destination marked.
8. Select h(Destination) symbol.
9. Select Guide.
10. Once you begin driving, an
audio prompt to “Proceed to
the highlighted route”is heard.
You are now in route
guidance mode.

Infotainment System 11
Using the Category or City
selections will aid the system in
finding your POI by limiting the
search options. See “Point of
Interest (POI)”under Destination on
page 62 for more information.
Storing a Home Destination
1. Press O/nto turn the
system on.
2. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 36 for more
information.
A notice may appear. Press the I
agree screen button to proceed.
3. Press )(Map).
4. Press the Menu screen button
from the map screen.
5. Press N(Memory Points).
6. Press L(Home).
7. Press Add.
8. Press Address and enter all
address information.
9. Press OK.
The Lwill be highlighted on the
DESTINATION ENTRY screen.
See “Using Your Home or Preset
Destinations”in this section for
more information.
See “Memory Points”under
Navigation Menu on page 47 for
more information.
Storing a Preset Destination
1. Press O/nto turn the
system on.
2. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 36 for more
information.
A notice may appear. Press the I
agree screen button to proceed.
3. Press the )(Map).
4. Press the Menu screen button
from the map screen.
5. Press N(Memory Points).
6. Press A(Preset Dests.).
7. Press Add and select the
numbered preset row to store
the destination as.
8. Press Address and enter all
address information.
9. Press OK.
The numbered preset
destination will be highlighted on
the DESTINATION ENTRY
screen. See “Using Your Home
or Preset Destinations”in this
section for more information.
See “Memory Points”under
Navigation Menu on page 47 for
more information.

12 Infotainment System
Using Your Home or Preset
Destinations
These destinations are available for
selection while driving.
1. Press O/nto turn the
system on.
2. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 36 for more
information.
A notice may appear. Press
the I agree screen button to
proceed.
3. Press ROUTE. Verify that the
selected Region is correct.
4. Select Lor one of the available
preset destination symbols.
A map screen appears with the
destination marked.
5. Select h(Destination).
6. Select Guide.
7. Once driving begins, an audio
prompt to “Proceed to the
highlighted route”is heard. The
vehicle is now in route
guidance mode.
See “Preset Destination”or
“Home”under Destination on
page 62 for more information.
Canceling Guidance
Guidance is canceled once at the
final destination. To cancel guidance
prior to arrival at the final
destination:
1. Press )(Map).
2. Press the Menu screen button
from the map screen.
3. Press E(Change Route).
4. Press Cancel Guidance.
5. Press Yes to confirm
cancellation.
Guidance Volume
To adjust the volume of voice
guidance prompts:
1. Press CONFIG.
2. Press 3(Navigation set up).
3. Press >(Volume).
4. Select the desired volume or
select Off. The system plays
back the new volume level.
See “Volume”under Configure
Menu on page 79 for more
information.

Infotainment System 13
Cleaning the Display
If the panel or the display is stained,
wipe it with a dry, soft cloth, such as
a silicon cloth.
Notice: If you use abrasive
cleaners when cleaning glass
surfaces, you could scratch the
glass. When cleaning the glass,
use only a soft cloth and do not
spray cleaner directly on the
system.
Do not apply spray cleaner directly
to the system, the cleaner could
affect the mechanical parts.
Do not wipe the panel with a hard
cloth or use a volatile liquid such as
thinner or alcohol, it could scratch
the surface or erase the characters.
Radio
AM-FM Radio
The vehicle has a feature called
Retained Accessory Power (RAP).
With RAP, the audio system can be
played even after the ignition is
turned off. See “Retained Accessory
Power (RAP)”in the Index of the
vehicle's owner manual for more
information.
The audio system is operated using
navigation system menus. The
audio menus are explained in this
section.
Radio Personalization
With this feature, the latest audio
system settings that were adjusted,
the last time your vehicle was
operated, can be recalled. This
feature allows two different drivers
to store and recall their own audio
system settings. The settings
recalled by the audio system are
determined by which RKE
transmitter (1 or 2) was used to
enter the vehicle. The number on
the back of the RKE transmitter
corresponds to driver 1 or to
driver 2. The audio system settings
automatically adjusts to where they
were last set by the identified driver.
The settings can also be recalled
using the memory screens under
the CONFIG MENU or voice
recognition. See Personalization on
page 100 for more information.
When battery power is removed and
later applied, the audio system
preset stations does not have to be
reset.

14 Infotainment System
Playing the Radio
On(Power/Volume):
1. Press to turn on and off.
2. Turn to increase or to decrease
the volume.
BAND: Press to access the audio
source screen. Then press this key
to switch between AM, FM, WX
(weather), or XM (if equipped).
AUX (Auxiliary): Press to play the
video and audio devices connected
to the auxiliary jacks. See Auxiliary
Devices on page 33 for more
information.
SRCE (Source): Press to change
the audio source from the radio
band to CD, audio DVD, or video
DVD, depending on what is loaded
in the six-disc DVD changer, or from
DVD/CD to radio mode.
e(Audio): Press to view the
AUDIO ADJUST screen. See “Audio
Adjust”screen in this section.
« ª (Seek/Scan):
1. Press the arrows to go to the
next or previous station and stay
there.
2. Press and hold either arrow for
less than two seconds to scan
stations. The radio goes to a
station, plays for a few seconds,
then goes to the next station.
3. Press either arrow again to stop
scanning or press the scan
screen button.
Tuning Knob: Turn to change
frequencies.
Finding a Station
Press the band/source screen
button, located in the top left corner
(AM, FM, CD, etc.), from any screen
to access the audio source screen.
Once this screen is displayed, press
BAND to toggle between the bands
or press the desired band screen
button, to select it.
FM source shown, other sources
similar
Scan: To scan stations, press the
Scan screen button. The radio goes
to a station, plays for a few
seconds, then goes to the next
station. Press Scan again to stop
scanning.
To scan preset stations, press and
hold Scan for two seconds. The
radio goes to the next preset
station, plays for a few seconds,
then goes to the next preset station.
Press Scan again to stop scanning.

Infotainment System 15
While in A.B.C mode, the system
changes bands and screens to the
current band.
If available on the vehicle, the 1 - 6
(preset seek) steering wheel control
can also be used. Each press of this
button goes to the next preset
station.
Auto Store (Automatic): Select to
automatically create a preset station
list of the strongest stations
available in the local area. Once this
button is selected, the system starts
storing stations in sequential order,
starting from the station currently
selected. Select this button again to
return to the original preset stations.
This is not available for XM™
Satellite Radio Stations or when
A.B.C. has been selected on.
Info (Information): See “Radio
Data System (RDS)”in this section.
Category: See “Radio Data
System (RDS)”in this section.
Preset Stations
Storing Preset Stations
This feature stores up to 24 preset
stations. Six AM, six FM, six WX
(weather), and six XM™, if equipped
can be stored. To store presets:
1. Turn the audio system on or
select BAND.
2. Select the audio band.
3. Seek, scan, or tune to the
desired station.
4. Press and hold one of the six
preset screen buttons for more
than two seconds or until a beep
is heard.
5. Press e(Audio Adjust) to adjust
the tone, Digital Signal
Processing (DSP), fade, and
balance. The screen times out
and the changes are stored to
the preset station.
6. Repeat the steps for each
preset.
A.B.C Preset Stations
A.B.C: This feature stores up to
42 presets, six stations in seven
different lists. The presets within
each list can be mixed: AM, FM,
or XM™, if equipped. The list
names are A - G.
Press the A.B.C screen button to
enter this feature. Press the left/right
arrows to scroll through the lists.
The name of the list is displayed
between the two arrows and the
presets for each list are displayed
on the preset buttons. These
presets are in addition to any preset
stations that may already be stored.
To exit this feature, press A.B.C.
To store the A.B.C presets:
1. Turn the audio system on or
select BAND.
2. Select A.B.C.
3. Scroll to the desired list (A - G).
4. Select the audio band. The
presets within each list can be
mixed: AM, FM, or XM™,
if equipped.

16 Infotainment System
5. Seek, scan, or tune to the
desired station.
6. Press and hold one of the six
preset screen buttons for more
than two seconds or until a beep
is heard.
7. Press e(Audio Adjust) to adjust
the tone, Digital Signal
Processing (DSP), fade, and
balance. The screen times out
and the changes are stored to
the preset station.
8. Repeat the steps for each preset
and list.
Audio Adjust
e(Audio Adjust): Press to access
the AUDIO ADJUST menu and to
adjust the tone, Digital Signal
Processing (DSP), fade, and
balance for all sources. The system
automatically stores audio
adjustment settings as changes are
made to a preset station.
Audio Pilot (Noise Compensation
Technology): The vehicle has
Bose AudioPilot
®
noise
compensation technology.
To use this feature, press the Audio
Pilot screen button. To turn it off,
press this button again. The button
highlights when this feature is on.
When on, AudioPilot
®
continuously
adjusts the audio system
equalization, to compensate for
background noise, so that the music
always sounds the same at the set
volume level.
This feature is most effective at
lower volume settings where
background noise can affect how
well you hear the music being
played through the vehicle's audio
system. At higher volume settings,
where the music is much louder
then the background noise, there
may be little or no adjustments by
AudioPilot
®
. For more information
on AudioPilot
®
, visit www.bose.com/
audiopilot.
Multi-channel: When available,
press this screen button to play the
DVD Audio source in surround
mode. Press this screen button
again to have the audio play in
2-channel mode. The system plays
Dolby and DTS tracks in surround
sound. This feature depends on the
media in the DVD changer.
Setting the Tone
P(Treble): Press plus (+) or
minus (−) located next to this
symbol to increase or decrease the
treble. Press the center position to
adjust the setting to the center.

Infotainment System 17
Mid (Mid-range): Press plus (+) or
minus (−) located next to this
symbol to increase or decrease the
mid-range. Press the center position
to adjust the setting to the center.
D(Bass): Press plus (+) or
minus (−) located next to this
symbol to increase or decrease the
bass. Press the center position to
adjust the setting to the center.
Z(Speaker): Press plus (+) or
minus (−) located next to this
symbol to increase or decrease the
speaker when in surround mode or
Center Point DSP setting is
selected. It increases or decreases
the amount of surround sound.
Press the center position to adjust
the setting to the center.
Adjusting the Speakers
Left/Right (Balance): To adjust the
balance between the right and the
left speakers, press and hold the
Left or Right screen buttons. To
center the balance and the fade,
press the center, where the two
lines meet.
Front/Rear (Fade): To adjust the
fade between the front and the rear
speakers, press and hold the Front
or Rear screen buttons. To center
the balance and the fade, press the
center, where the two lines meet.
Digital Signal Processing (DSP)
This feature is used to provide a
choice of five different listening
experiences. DSP can be used
while listening to the audio system
or the six-disc DVD changer. The
type of DSP selected is displayed
on the status line.
Center Point: Press to enable
Bose
®
5.1 Studio Surround
®
sound.
Normal: For non-surround sound
sources only. Press this button to
adjust the audio to be in normal
mode. DSP will be in the off mode.
Driver: For non-surround sound
sources only. Press this button to
adjust the audio to give the driver
the best possible sound quality.
Talk: For non-surround sound
sources only. Press this button
when listening to non-musical
material such as news, talk shows,
and sports broadcasts. Talk makes
spoken words sound more clear.
Rear Seat: For non-surround
sound sources only. Press this
button to adjust the audio to give the
rear seat occupants the best
possible sound quality.
5.1 Surround: Press this button,
when listening to a DVD, to give a
full affect of surround sound
listening. The Centerpoint screen
button must be selected to select
the 5.1 Surround screen button.

18 Infotainment System
Audio
Press to access several audio
features that may be turned on and
off and several options are available
for adjustment. The screen buttons
next to each selected option
highlights when on. The items on
this menu depends on which audio
source is playing.
Auto Store: Press to turn the Auto
Store on for the current audio
source selected. When on, this
button appears on the main audio
screen. This button is not available
when in XM™.
Info (Information): This button is
only available when in FM or XM™.
Press to turn information on. The
information changes depending on
the audio source is selected. When
on, the Info screen button is
available to select from the audio
main menu.
Category: This information
changes depending on what audio
source is selected. This button is
only available when using the FM or
XM™audio modes. Press this
button to turn the Category function
on. When on, the button is available
to select from the audio main menu.
r [ rj# # (CD/MP3
Controls): This button is only
available when using the CD or
MP3 audio modes. When on, these
screen buttons, rewind, fast forward,
play, pause, previous folder, and
next folder, is available to select
from the audio main menu.
Traffic: This button is only
available when using the FM or CD/
DVD audio modes. When on, the
Navigation System searches for
stations that broadcast traffic
announcements.
The following screen buttons are
only available for video DVDs:
Audio Language: Press to view a
list of language choices. Select the
desired language to change the
spoken language. The list of
languages depends on the
languages supported by the disc.
Subtitle Language: Press to view
a list of languages to choose for
subtitles. Select the language
desired. The list of languages
depends on the languages
supported by the disc.
Menu Language: Press to view a
list of languages to choose for the
DVD menu text. The list of
languages depends on the
languages supported by the disc.

Infotainment System 19
Parental Level: Select this button
if you choose to set up parental
protection. Use the keypad to enter
the password. Select from options
such as change level and change
password, as necessary.
Radio Data System (RDS)
The audio system has a Radio Data
System (RDS). RDS features are
available for use only on FM
stations that broadcast RDS
information. With RDS, the
radio can:
.Seek to stations broadcasting
the selected type of
programming
.Receive announcements
concerning local and national
emergencies
.Display messages from radio
stations
.Seek to stations with traffic
announcements
This system relies on receiving
specific information from these
stations and only works when the
information is available. In rare
cases, a radio station may
broadcast incorrect information that
causes the radio features to work
improperly. If this happens, contact
the radio station.
The RDS system is always on.
When information is broadcast from
the FM station that is on, the station
name or call letters display on the
audio screen. RDS may provide a
program type (PTY) for current
programming and the name of the
program being broadcasted.
[ ] (No Traffic Announcements):
Appears on the status line when
traffic is selected, but the station
does not broadcast traffic
announcements.
[TA] (Traffic Announcements):
Appears on the status line
when the station selected
broadcasts traffic announcements.
TA announcements depends on the
station.
Info (Information): Press this
button to display information
broadcasted by the RDS station
when in FM. This is not available for
AM or WX stations.
Category: Press this button when
in FM to view the program types.
They appear in place of the preset
stations. Select a category and the
system starts seeking for available
stations within the selected
category. If none are found, the
system displays “None Found”and
returns to the last selected station.
To seek to another category, press
seek/scan. The system seeks to
another station in the category.

20 Infotainment System
To scan stations in the category,
press the Scan screen button. The
system starts scanning the stations
in the category. Press the Scan
screen button to stop scanning
stations.
To exit out of category, select the
category screen button and the
program types no longer display.
Each of the six category names
displayed, include a grouping of
other program types, see the
following table. This is not available
for AM or WX (weather) stations.
Group Name Category
POP
Rock
Classic Rock
Adult Hits
Top 40
Oldies Music
Nostalgia
College
Group Name Category
EASY
Soft Rock
Soft
R&B
Soft R&B
Religious Music
TALK
News
Information
Sports
Talk
Language
Religious Talk
Personality
Public
Weather
CNTRY Country Music
CLASS Classical
JAZZ Jazz Music
Satellite Radio
XM™Satellite Radio Service
XM™is a satellite radio service that
is based in the 48 contiguous United
States and 10 Canadian provinces.
XM Satellite Radio has a wide
variety of programming and
commercial-free music,
coast-to-coast, and in digital-quality
sound. During your trial or when you
subscribe, you will get unlimited
access to XM Radio Online for
when you are not in the vehicle.
A service fee is required to receive
the XM service. For more
information, contact XM at
www.xmradio.com or call
1-800-929-2100 in the U.S. and
www.xmradio.ca or call
1-877-438-9677 in Canada.
When XM™is active, the channel
name and number, song title, and
artist will be displayed on the
screen.