Cashmaster Sigma 100 User manual

quick start guide
sigma
100

The display will show the value, eg: sigma
100
100
0,00
+>
5x20
sigma
100
sigma
100
sigma
100
sigma
100
sigma
100
Counting Coins
Loose Coins Packaged Coins
2c=0.00 Scoop
0,43
+>
20cx50 10,00
10,00
+>
0
10,00
+>
Keys: Up Arrow
Down Arrow
Loose Coins
Notes
>
+
+>
1cx43 0,43
0,00
sigma
100
+>
1cx43 0,43
0,00
quick start guide
Functions:
Cash Types:
On/Off
Plus
Cash Type Print Packaged Coins
Auto Scroll
Auto Add
Indicator
Press the Cash Type key until the indicator points to "Loose Coins". Press the Cash Type key until the
indicator points to "Rolled Coins".
Place a roll of coins onto the hod.
The display will show the value, eg:
Remove the roll and the value will automatically
be added to the grand total:
(Note: If Manual Coin is on, you will need to select
the denomination first. If Auto Add is off, you will
need to add the value by pressing the Plus key.)
Getting Started
- Place the Sigma 100 on a firm, even surface, away from draughts and vibrations.
- Insert the HOD, pushing the connection firmly into place.
- Plug the adaptor into the back of the Sigma 100 and turn on the mains power supply.
- Turn on the Sigma 100 using the On/Off key (please ensure that the coin scoop is not placed on the cash counting machine prior to switching on).
- Leave your Sigma 100 plugged into the mains for at least 12 hours to charge the battery. The machine can still be operated during this time.
You can select the denomination you require with the Up or
Down Arrow keys.
Place a scoop full of coins onto the hod.
The display will show the value, eg:
Remove the Scoop and the value will automatically
be added to the grand total:
(Note: If Auto Add is off, you will need to add the
value by pressing the Plus key.)
Press the Cash Type key until the indicator points to "Notes".
You can select the denomination you require with the Up or Down Arrow keys.
Place slices of notes onto the hod.
Remove the notes and the value will automatically be added to the grand total, eg:
(Note: If Auto Add/Scroll is off, you will need to add the value by pressing the Plus key.)
Counting Loose Notes
- To delete a sub total, select the desired denomination, then hold down the "Plus" key until the value returns to zero.
- To delete the grand total, hold down the "Plus" key until the display shows "Press the Plus key again to confirm". Pressing the "Plus" key again will clear the
- To print your count information, press the "Print" key (CP3 printer must be attached).
- If Multi Currency is available, switch currencies by pressing the Up and Down arrows simultaneously until the desired currency is displayed.
- Hold down the "On/Off" button for 2-3 seconds to turn off.
grand total. Pressing any other key will abort.
sigma
100
10=0 0
100,00
+>
cash value of applied
denomination
denomination and
number of pieces
grand total
current cash
type indicator

sigma
100
quick start guide
Place 8 -10 notes of the chosen denomination onto the
hod. After a reading is displayed, continue adding notes
in small numbers. Remove all of the notes and repeat
until you can increase the number of notes applied each
time. Eventually the machine will accept up to 25/30*
notes each time.
PRESS ZERO KEY - The scale is not at zero. Push the ON/OFF key once to return the scale to zero.
SCOOP message - If the machine is asking for the scoop when the scoop is already placed on the hod, simply zero the machine
by pressing the ON/OFF key once.
The Sigma 100 will read the weight of the notes it counts
and will make any adjustments required to its permanent
m e m o r y . R e p e a t t h i s p r o c e s s f o r a l l t h e o t h e r
denominations.
If the following message appears on the display, then too many notes have been applied: sigma
100
Too many notes
Remove Some
2
Box Contents
Teaching the Sigma 100
'Grams' mode
Common Error Messages
1
hod
coin scoop
Sigma 100
The Sigma 100 can also be used as a standard hi-precision weighing machine. Ideal for checking letter and parcel weights prior
to posting.
To access 'Grams' mode, press and hold the 'Down Arrow' key and the 'Cash Type' keys ( + ) simultaneously. This will
show the following message on the display:
The Sigma 100 is now in 'Grams' mode, capable of weighing.
To return to Counting mode, press and hold the 'Down Arrow' key and the 'Cash Type' keys simultaneously. The screen will
now return to its original display.
sigma
100
0.0g
Grams Mode
AC adaptor
Product Specification Functions
Till count - 1
10 hour battery life
Grams mode
ISO 9001:2001 Registered Extended warranty
Connectivity: optional
Multi currency
Counts loose, bagged and rolled coins
Counts loose notes
Printer port
All Cashmaster machines are calibrated at the factory but note weights do vary slightly depending on age and usage, the following
should be completed on receipt of your new machine to obtain optimum performance.
Remove some notes until you get a valid reading, then continue placing notes, as above.
SUSPECT BAG / ROLL - Bag / Roll of coins applied is suspect. User may leave bag on hod and select the correct coin denomination
by pressing the or keys
(If scoop tare switch is active.)
* The maximum note slice quantity that can be applied is governed by the currency condition and may alter between countries.