Cellinx CamPilot STH120 User manual

1
Full HD IP Box Camera
CamPilot STH120
User Manual
CamPilot STH120
(Lens are sold separately)
•1/3" Panasonic CMOS
•True Day & Night / 3D DNR / WDR / BLC / DEFOG
•C/CS Mount, DC Iris Lens Support
•1920x1080 resolution at 30FPS
•Multi-codec support : H.264 / MJPEG / MPEG-4
•Multi-stream with variable resolution & frame
-1st stream : H.264 or MJPEG @ 1080p~VGA
-2nd stream : H.264, MPEG4 or MJPEG @ D1~CIF
-3rd stream : H.264, MPEG4 or MJPEG @
CIF~QCIF
•Stream based motion detection
•Multi-codec audio support : G.711 / G.726
•Two-way audio supported (Full Duplex)
•Alarm Input (1ch) / Output (1ch)
•SD / SDHC card support
•Power : DC 12V, 1A (PoE)
Before installing and using the product,
please read this manual carefully.
Be sure to keep it handy for later reference.
Overview
Accessories
An adaptor and a LAN cable are not included in the product

2
Precaution
WARNING
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS
■ Do not open or modify
Do not open the case, as it may be dangerous and cause damages.
■ Do not put objects inside the unit
Make sure that no metal objects or flammable substances get inside the camera. It could cause
fire, short-circuits or damages.
■ Be careful when handling the unit.
To prevent damage, do not drop the camera or subject it to strong shock or vibration.
■ Install away from electric or magnetic fields.
■ Protect from humidity, dust and high temperature.
An additional case that is temperature-controllable, damp-proof and waterproof is required for
outdoor use.
■ Cleaning
Dirt can be removed from the case only by wiping it with a soft cloth moistened with a soft
detergent solution.
■ Mounting Surface
The mounting surface material must be strong enough to support the camera.
■ CamPilot STH120 can be used for surveillance purpose.
Be thoroughly informed of related regulations prior to installation to ensure compliance with such
regulations

3
Overview
Features and Appearance
CamPilot STH120 is an IP Camera that transmits real-time high-resolution digital video
and audio data with H.264 high compression rate over Internet or Intranet.
DC12V (Power, No polarity)
LAN / POE (Network)
VIDEO (D1 output for test, BNC connector)
RESET (Setting initialization switch)
AUDIO IN / OUT
RS422 (Pan/Tilt communication,
TX: transmission, RX: reception)
DIO (Digital Input / Digital Output)
DC Iris connector
▶Rear (detail)
▶Top
▶Side
▶Front
C/CS mount ring

4
Specification
Specification
Camera Module Device 1/3" Panasonic CMOS
Pixels 1944(H) x 1092(V) = 2,122,848 (pixel) (Effective)
Min. Illumination Color : 1.0 lux / BW : 0.5lux / Color DSS : 0.002 lux / BW DSS : 0.001 lux
Resolutions Digital ; 1920x1080p(1080p/30fps) , 1280x720p(720p/60fps)
Shutter Speed Auto / Manual ( 1/30(1/25) ~ 1/60000 )
Function
AGC, WDR/BLCMode, DAY&NIGHT(Auto / Day / Night / Ext),
SMART IR, WHITEBAL (Auto / Manual / etc.), 2D/3DDNR, DEFOG
Privacy Zone Off / On (32 points)
S/NRatio more than 50dB (AGCoff)
Video Compression Compression Type H.264(MPEG4 AVC) @L3.0 / MJPEG / MPEG4
Resolutions 1080p / 720p / D1 / 4CIF/ VGA / CIF/ QVGA / QCIF
Bitrate 32Kbps ~ 6Mbps
Frame Rate 30FPS @1920x1080p
Streaming H.264 Triple Streamor Simultaneous H.264 / MPEG4 / MJPEG
Audio Streaming Bi-Directional Audio Tw o way, full duplex
Audio Compression G.711 / G.726
Audio Line Input Line level input. Nominal 0-dB input level is 1.0 VRMS.
Audio Line Output Line level output. Nominal output level 1.0 VRMS.
External I/O AlarmInput / Output 1 ch / 1ch
RS422 (RS485) 1Ch. for External Device Control like a Serial Device
Local Storage Micro SD/ SDHCCard support up to 32 GB
Reset Button Restore to default setting (Network, Password and etc)
Network Ethernet Ethernet(10/100 Based-T), RJ-45 Connector
Protocol
TCP, IP, HTTP, DHCP, FTP, DNS, DDNS, NTP, ICMP,
SNMP, SMTPE, UPnP, RTP, RTSP, Onvif
Software OS Embedded OS (Linux)
Web Browser IE8.0 or above
SDK Cellinx SDK 4.0
Security MD5 Password / iptables (firewall) / SSL
Operating Temperature -10°C~ 55°C/ 14°F~ 131°F
Power Power Requirement DC12V 1A / PoE(IEEE802.3af)
Physical Weight 1.5 kg
Case Material Aluminum(IP66)
Items
* All specifications are subject to change without notice.

5
Specification
Dimension
REF Monitoring PC Requirements
Item
Specification
Monitoring
PC
Processor
Pentium Core2 Duo or more
RAM
2GB or more
Graphic Card
512MB or more
OS
Windows 2003 / XP / Vista / 7
Monitor Resolution
1024 X 768 pixels or more
Network
10/100 Base-T LAN
▶Front
▶Side
▶Top
▶Rear

6
Connection
Basic connection
(1) DC 12V –power, DC 12V 1A adaptor (No polarity, auto switching)
(When the PoE is used, the power connection is not necessary.)
(2) LAN / POE –ETHERNET, LAN cable (RJ45 jack,Auto detection of cross/direct cable)
(Please, refer to the standard of “IEEE 802.3af”)
Expert connection
(1) AUDIO IN / OUT
- IN: microphone, line level input (RCA jack, an amplified microphone should be used.)
- OUT: speaker, line level output (RCA jack, 8Ω)
(2) RS422: external device control (etc. PTZ receiver)
(3) DI (Digital Input): sensor, no polarity (N.O / N.C are all available.)
(4) DO (Digital Output): alarm, relay switch (nominal voltage 5VDC, 1A)
An example of the relay device that is connected on “DO (Digital Output)”
Fix the mount ring with the wrench after assembling the lens
IP address setup
Set the IP address (Refer to “Network” at p.7~8)
Manufacturer: SUNWOO /
Model: SW LY2N
▶Relay device
▶The hole for fixing the mount ring

7
Network
Setting an IP address
Change the network setting value with the program “NVTManagement”
1. NVTManagement execution
• Execute the file “NVTManagement.exe”
2. IP address set-up
• Click the button “NVT Scan”, select the model.
• Input the IP address, Subnet Mask, Gateway and DNS Server IP address, click the button
“Apply”
• If you don’t have a proper IP address, ask the network administrator.

8
Network
3. Accessing to CamPilot STH120 with a web browser
Open a web browser on a monitoring PC and enter the IP address assigned to a CamPilot
STH120 as following
Example> http://192.168.1.2
• The page as below shows up after the connection is completed.
ID / Password :
root / pass (Initial Value)
Login button :
it enables you to move to the Web
Monitoring Page. On checking the
Setting box and clicking the button, you
can move to the Web Setting Page.
Guest Login :
you can move to the Web Monitoring
Page as “guest”
Refer to the document “STH120_Web_Manual.pdf” for the Web server.
< 초기 접속화면 >
< 영상 모니터링>
▶The Initial Page
▶Web Monitoring Page