_________________________________________________________________________________________________________________
Tel: 0086-755-33633930 Fax: 0086-755-33633934 www.chainwayits.com 5 / 10
Smart phone APP dose not distinguish rollover alarm and impact alarm, both are considered as emergency
alarm.
If there is impact or rollover during sleeping, device will wake up and send alarm after being online. If there is
impact or rollover during working, device will send alarm immediately.
3.4 Device Status
Device indicators status: when device gets power at first time, three indicators will blink at same time and then
turn off. The yellow and red indicators will blink after that, which means initialization has been finished. The
yellow is online indicator, quick blinking means offline, slow blinking means online. The red is positioning
indicator, quick blinking means not fixed position, and slow blinking means fixed position.
Device status query: when device is online, user can query status by smart phone APP, can obtain detailed
working status and know current working status.
Uploading contents: device ID, protection status, online status, status update time, communication signal
strength, satellites positioning status, accelerator sensor status, bus connection status, device firmware
version, module version and runtime etc.
Device sleeping: if device starts at first time, device will keep online until device sleep after fixing position. If
device does not fix position in 25 minutes, it will sleep soon. If device has already fixed position, it will sleep in 2
minutes. Device will wake up 1 time every 1 hour during sleeping, and then sleep again after 200 seconds.
3.5 Mileage and Fuel Consumption Collection
Mileage collection: device can collect GPS speed and meter speed to calculate interval mileage and send to
platform. Platform works out total mileage according to interval mileages.
Fuel consumption collecting: device can connect BUS to collect interval fuel consumption data and send to
platform. Platform works out total fuel consumption according to interval fuel consumption data, and make
various fuel consumption diagrams.
3.6 Driving Behavior Optimizing
Device can collect harsh acceleration, harsh deceleration, high engine revolution times, mismatch between
speed and revolution, over speed times and idle times etc and send to platform for calculation and statistics.
Smart phone APP grades driving behavior according to platform data.
Over speed: if driving speed is over than preset speed and last preset time, it will be considered as over speed.
Harsh acceleration: when acceleration in 2 seconds is more than preset acceleration, it will be considered as
harsh acceleration.
Harsh deceleration: if deceleration in 2 seconds is more than preset deceleration, it will be considered as
harsh deceleration.
Harsh turn: if turn in 5 seconds is more than 50° and driving speed is more than 3.5 km/h, it will be considered
as harsh turn.
High revolution: if revolution is more than preset revolution, it will be considered as high revolution.
Speed not matches revolution: device obtains vehicle speed and engine revolution, and then check whether
the matching relation between the revolution and the speed has obeyed the preset matching relations.
Idle times: if vehicle keeps static status or speed is always less than preset value, it will be considered as idle
status. The idle times will add one more every 10 minutes if vehicle is in idle status.
