Chasing Control Console User manual
1
6
9
10
11
32
33
12
14 15 16 21
20
29
30
31
22
23
24
25
26
17 18 19
13
27
28
7
8
2
3
4
5
CHASING Control Console User
Manual
V1.0
CHASING Control Console is a professional control platform designed for high-end
professional users. The Aluminum-alloy shell is strong and durable. The built-in
13.3-inch 1080P display delivers real-time ROV underwater images, which are
clearly visible in even direct sunlight.The ergonomic control platform, with a
number of well-designed switches, buttons and interfaces, makes it can control
ROV and USV simultaneously, as well as AC direct power supply, USBL, manipulator
arm, image sonar, external lights and other professional accessories. Four brackets
can be set separately to adapt to various terrains.With rollers at the bottom, it
can be easily carried like a suitcase after folding. It can work anywhere easily.
1. Power Switch: Long press to turn on/off the control console power.
2. Standard Interface：Control console charging /Remote controller /ROV
tether socket.
3. ROV Left Angel Adjustment：Adjust the ROV pitch angle.
4. USV Left Control Sticks: Used to control the navigation of the USV.
5. ROV Left Control Sticks: Used to control the navigation of the ROV.
6. RJ45 Interface 1: 10/100Mbps Ethernet.
7. RJ45 Interface 2: 10/100Mbps Ethernet.
8. Lifting Platform: Control the ROV lifting platform of the USV.
9. USB Interface 1: USB2.0
10. USB Interface 2: USB2.0
11. USB Fast Charging Interface: QC3.0 charging interface.
12. USV Function Key Area
13. User Defined Function Key Area
14. ROV mount 1: ROV manipulator operating button.
15. Photo/Video: Short press to take photos, long press to start / end recording
video
16. Unlock: Unlock/Lock Motors
17. ROV mount 2: ROV accessories operation button (user-defined).
18. One-key reset: Short press to reposition the ROV return to a horizontal
state/ Long press to switch control mode.
19. Led Control: On / off led light (0%50%100%)
20. 12V DC Interface: 12VDC/3A output.
21. AC Power Output Interface: ROV AC Power Interface.
22. AC Power Socket: AC power input.
23. AC Power Switch: I=ON，O=OFF
24. ROV Right Angel Adjustment: Adjust the rollover angle.
25. USV Right Control Sticks: Used to control the navigation of the USV.
26. ROV Right Control Sticks: Used to control the navigation of the ROV.
27. AC Power Protection Switch: Air protection switch and leakage protection
switch.
28. Signal Indicator Light: Indicator light for control console, ROV and USV. The
green light is always on when working.
29. Display Button: Adjust the parameters of the display screen.
30. Display: Touch screen.
31. Light Shield
32. Wheel
33. Removable bracket: used to support the control console.
Installation and connection
Mounting bracket 1
·2.1 Not using AC power supply
·2.2 Using AC power supply
Connect the ROV to the control console2
Precautions
1. Please press the pill-shaped button on the upper right corner of the leakage
protection switch every month to verify whether the protection switch is
working properly.
2. Please take the control console lightly to avoid possible damage to screen or
other parts.
3. Do not splash water or liquids on the control console to avoid damaging the
hardware.
Charging Guidance
1.The CHASING Control Console supports 25.2V 2.9A and 25.2V 8A chargers for
charging.
2. Red light indicates Charging, green light indicates fully charged.
3. Please disconnect the charger in time after charging is completed.
4. Please unplug the charger after charging.
This content is subject to change without prior notice,
you could have the latest user manual by the www.chasing.com.
www.chasing.com
Specifications
SIZE
WEIGHT
OPERATING TEMP
Control Console Screen
484×375×178mm
11 Kg
-10℃~45℃
SIZE
RESOLUTION
DISPLAY
BRIGHTNESS
13.3 Inch
1920×1080
1000 cd/㎡
INTERFACE
AC INPUT
AC OUTPUT
Interface
Battery
RJ45 × 2
USB 2.0 Host × 2
QC 3.0 USB ×1
200 V ~ 240 V
220V
RUNTIME
BATTERY
CHARGE TIME
8 Hours
226.8Wh
3A Charger: 4.5 Hours
Do not run out
of battery power
Charge when
power is less
than 25%
When not in use,
keep battery
power at
50% ~ 70%
Working
temperature
-10℃ ~ 45℃
（-18℉ ~ 113℉）
Take out the four brackets from
the control console package, pull
the brackets to the longest
length (users can adjust the
length according to needs). Align
the socket on the back of the
control console and tighten the
brackets clockwise to complete
the installation.
Connect tether to connector of the ROV and reserve a suitable length. Hang
the hook of the cable head on the hook bracket at the rear of the machine and
tighten it. The other end is connected to the connector ② of the control
console and tighten it.
1) When the docking station is not in use, insert one end of the AC tether with
the latch to the AC power supply component of the ROV.
2) When using the docking station, install and connect the docking station to
the ROV at first. And then insert the end of the AC tether with the latch to the
AC tether connector of the docking station.
Reserve a suitable length and Hang the hook of the cable head on the hook
bracket at the rear of the machine and tighten it. Insert the other end of the AC
tether to the AC power supply output interface at the top right of the control
console panel 21 , and then connect the AC power supply 220V power cable to
the AC power socket 22 of the control console to complete the connection.
·3.1 Not using AC power supply
· 3.2 Using AC power supply
Power ON3
Long press the power switch ① in the upper left corner of the control console
panel for one second, then the ROV will power on with a self-test sound, while
the control console’s touch screen lights up, wait until the touch screen is fully
activated, find the CHASING GO1 App, click it to enter the App control interface,
then you can get the real-time image and control the ROV.
Press the power button 23 to “I” status to power on, then follows the steps
3.1 “Not using AC power supply”.
Note: To use the AC power supply function, you need to turn on the AC power
supply option in the APP after the ROV is successfully connected.
Other manuals for Control Console
1
