Christina Watches 505 User manual

USER MANUAL - MODEL 505
www.christinadesignlondon.com
CAL. 706.B

www.christinadesignlondon.com 2
USER MANUAL - MODEL 505
Movement specication: RONDA caliber 706.B quartz analog movement with the following
displays: Date, day, moon phase and calendar week
Day change: Tuesday to Sunday approx. midnight;
Monday approx. 12.15 a.m.
Date change: Monday to Sunday approx. 1.30 a.m. to 3.00 a.m.
Change of moon phase: Monday to Sunday approx. 8.00 p.m.
Change of calendar week: Monday approx. 12.15 a.m.
Times during which calendar functions must not be changed (limited time zones)
Calendar functions must not be altered between 11.30 p.m. and
5.30 a.m. because automatic changes are in progress at these ti-
mes. Pressing the pusher during these times may damage the mo-
vement
Setting of time after a battery change
Winding crown position 1
- Normal position Watch is running
Winding crown position 2
- Stop-second Movement stops (interruption of motor pulses)
D
A
1 2

www.christinadesignlondon.com 3
USER MANUAL - MODEL 505
1. Set moon phase
Set date
Set day
Rotate hands clockwise past midnight until the full moon position
appears in the window on the dial. Continue rotating hands until
6.00 a.m. (outside of limited time zone).
With the winding crown turn the hands forwards and backwards
past midnight until the day of the last full moon is reached (check
calendar) and use the quick-change corrector (pusher A) to set the
date of the last full moon. Then use the crown to turn the hands
forwards until the current date is reached.
You have now set the corect moon phase position, date and day
Quick change correctors
Pusher D at 2 o´clock position
- Quick change corrector for
calendar week
Pressing pusher Dmoves the calendar weekn display forward by
one week.
You must not use this quick change corrector between 11.30 p.m.
on Saturday and 12.45 a.m. on Tuseday because the automatic
change mechanism is in operation between these times
Push-piece A at 4 o´clock position
- Quick change corrector for
date
Pressing pusher Amoves the date forward by one day.
You must not use this quick change corrector between 11.30 p.m.
and 5.30 a.m. because the automatic change mechanism is in ope-
ration between these times
Set day
Only possible using the
winding crown
Set the watch to 11.30 p.m. and then rotate the hands forward to
12.30 a.m. The day will change to the following day. Repeat this pro-
cedure by winding the hands backward and forwards past midnight
until you reach he current day of the week. You must not use this
quick-change corrector between 11.30 p.m. and 5.30 a.m. because
the automatic change mechanism is in operation between these ti-
mes