CiERA EZ StandTall ONE User manual

CiERA EZ StandTall ONE™
Thank you for purchasing the StandTall ONE™ Portable TV Stand. This TV stand is designed to accommodate flat panel TVs
from to 28" to 70" diagonal weighing up to 90 Lbs.
Name Part Qty.
Base A 1
Column A B 1
Column B C 1
Receiving Bracket D 1
Column Support
Inserts
E 2
VESA 100x100 to
200x200 Interface
F 1
VESA 300x300 to
400x400 expander
G 2
Allen Wrench H1 1
Allen Wrench H2 1
M5x12mm Screw I 2
M6x60mm Screw J 4
Column Connector
Screw
K 1
Step 1 Step 2
Part E
Part A
Part I
Part H2
Part J
Part H2
Part B
Part C
Part B
Part K
Part D
Part H1
Step 3 Step 4
Page 1 of 2
Copyright © 2016 CiERA Portables All rights reserved.

VESA 100x100 to 200x200 TV’s
Align VESA Bracket (F) with the narrowest part of the “Keyholes
up” with the corresponding mounting holes on the back of your
TV. Attach VESA Bracket to your TV with provided screws and
tighten with provided Allen Wrench (H2) until firm. Do not over
tighten!
Remove the side clamp from Receiving Bracket (D) and set aside.
Position widest part of “Keyholes” on VESA Bracket with the four
receiving screws on Receiving Bracket (D) and slide VESA Bracket
downward making sure the VESA Brackets is on all for receiving
screws of the Receiving Bracket. Proceed to “Securing Your TV”
below
Attaching VESA 100-200 Bracket to TV Attaching TV to Receiving Bracket (D)
Important: Once VESA Bracket is in place on the
Receiving Bracket (D) re-attach side clamp.
Page 2 of 2
Copyright © 2016 CiERA Portables All rights reserved.
Step 1 Step 2
IMPORTANT! Securing your TV
Attaching VESA 300x300 and 400x400 Wings
Remove the side clamp from Receiving Bracket (D) and set aside.
Position widest part of “Keyholes” on VESA Bracket with the four
receiving screws on Receiving Bracket (D) and slide VESA Bracket
downward making sure the VESA Brackets is on all four receiving
screws of the Receiving Bracket (D). Proceed to “Securing Your
TV” below.
Align VESA Bracket (H&G) with the
narrowest part of the “Keyholes” in the
up position. Align with the
corresponding mounting holes on the
back of your TV. Attach VESA Bracket
to your TV with provided screws and
tighten with provided Allen Wrench
(H2) until firm. Do not over tighten.
VESA 300x300 to 400x400 TV’s
Align the VESA Wings (G) holes with
grip nut mounting holes on the VESA
200 Bracket (F). Attach Wings (G) to
the front of the VESA 200 Bracket (F)
with provided screws as shown in the
image to the left.
Step 1 Step 2
Attaching VESA Bracket to TV
Step 3
Attaching TV to Receiving Bracket (D)
Determine your TV’s VESA pattern and select appropriate method below