Cino US100 User manual

Hand-free Stand
Installation Guide
US 100

1
Overview
Thank you for purchasing Cino US100 Hand-free Stand. The US100 is
specifically designed for hands-free applications, delivering great flexibility to
maximize users’ comfort and productivity. This document provides an easy
reference for assembling and installing the US100.
Assemble the Stand
Step 1
Screw Hole
Base Supporter
Package Content :
Bracket
Scanner Holder
Angle Adjustment Knob
Base
Turn the base upside-down
and open the base supporters.
Turn the base to the front side
and place the base on you
r
desired location.
Insert a M4 (approx. 8~10mm
long) flat head self-tapping
screw into the screw hole of
the base.
Tighten the screw to secure
the base to the flat surface.
If you would like to fix the stand
by screw, please follow below
procedures.
Please note that the M4 screw is
not provided in this package.

2
Step 2
Step 3
Dismount the Stand
Fit the bracket into the base to
lock the bracket to the base.
Place the scanner holder on
the bracket groove properly.
Insert the angle adjustment
knob. Turn the knob clockwise
to secure the scanner holder
to the bracket.
The stand is now ready to be
used with the scanner. You
can loose the knob to adjust
the angle.
Release the knob to remove
the scanner holder.
Prepare a long screwdriver
and insert it into the hole on
the top of the bracket.
Loose the screw from the
base and remove the base
from the mounted surface.

CINO GROUP
P/N: YMAUF00010010R0
© Copyright PC Worth Int’l Co., Ltd.
© Copyright Cino Group
US100 Installation Guide
International Edition, Rev. A1
PC WORTH INT’L CO., LTD.
www.cino.com.tw