USX-MOUNT XMM006-09 User manual

XMM006-09
INSTRUCTION MANUAL
For 26-55" TV
If you have any questions along the way, just give us a call
1-800-460-0956 or mail to [e-mail].
We’re ready to help!
TM
CA-A1

Before getting started, let’s check below lists to make sure it is just right for you!
2
3
4
5
2
Does your TV
(including accessories)
weigh MORE than
60 lbs. (27 kg)?
What is your
wall made of?
Do you have
all the tools
needed?
(NOT INCLUDE) Tape
Measure
CAUTION
Pencil Level Screw
driver
Electric
Drill
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
Drywall with
wood studs? CAUTION:
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
Solid concrete ?
1/2 in.
(13 mm)
Socket
Wrench
Stud
Finder
5/32 in.
(4.0 mm)
Wood
Drill Bit
● This product is designed for use in wood stud, solid concrete walls - DO NOT install into drywall alone
● The wall must be capable of supporting five times the weight of the TV and mount itself
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Unsure?
Call Customer Service:
1-800-460-0956
3/8 in.
(10 mm)
Masonry
Drill Bit
Hammer
1
Check your TV
VESA is within
Min and Max size
No? This mount is NOT compatible.
Yes? Perfect !
MAX:400mm/15.74"
(MIN:75mm/2.95")
MAX:400mm/15.74"
(MIN:75mm/2.95")

400mm
[15.75in]
400mm
[15.75in]
TV INTERFACE 3-D
WALL PLATE
FULLY ASSEMBLED MOUNT TOP VIEW - RETRACTED SIDE VIEW - RETRACTED
TOP VIEW - EXTENDED SIDE VIEW - EXTENDED
3
50mm
[1.97in]
224mm
[8.82in]
112mm
[4.41in]
444mm
[17.48in]
444mm
[17.48in]
481mm
[18.95in]
71mm
[2.81in]
+5°
-15°
281mm
[11.04in]

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
4
Allen Key
x1
M6x8mm Bolt
x4
M4x12mm
M6x12mm
M8x25mm
M4x30mm
M6x35mm
Extended arms
x4
Spacers
TV Screws
x4
x4
x4
x4
x4
x4
M6x17mm
M8x22mm
M4 M6
10mm
2.5mm
Washers
x4
x4 x4
x8 x4
x4
M8x45mm
TV plate
x1

Parts and Hardware for STEP 2
5
Lag Bolt
x4
Wall Plate
x1
Velcro x3
x2
M6x10mm Bolt
Contact us at telephone [phone] (USA)
or mail to [e-mail]. to have
these additional pieces shipped directly to you.
Concrete Wall Anchor
4pcs

6
1-1 Choose Configuration
If your TV VESA size is above 200*200mm, you need to assemble extended arms onto TV plate
using bolts and Alley key per below option 3 - option 6 shown.
①
②
③
④① 75X75
② 100X100
③ 100X200
④ 200X100
⑤ 200X200
⑤
①
②
③
④
⑤
①
②
③
④
⑤
①
②
③
④
⑤
⑥ ⑥
⑥ ⑥
150X150
⑥
Option 1
Option 2
200X300
400X200
⑧
⑦
⑨
⑧
⑦
⑧
⑦
⑧
⑦
⑧
⑦200X400
⑨
⑩⑨⑩
⑨⑩ ⑨ ⑩
300X200
⑩
Option 3
Option 4

7
400X400
400X300
300X300
Option 5 Option 6

8
M8
M6
M4
1-2 Select TV Screws

Tips: If you need to combine M6/M8(c/e/f) screws with
2.5mm spacers( i ), you have to remove the inner circle.
9
Yes, choose suitable screws, washers and spacers.
1-4 Attach the TV Plate
No!
No, choose suitable screws and washers.
VESA≤200X200mm
200X200mm<VESA≤400X400mm
1-3 Need Spacer?

CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall, must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
● Stud center must be verified
1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using a thin nail,
or an edge to edge stud finder.
2. Position the wall plate at your desired height and line up the holes with your stud center line. Level
the wall plate and mark the hole locations.
Centre line
10
Wall plate

3. Drill pilot holes using a 5/32 in. (4.0 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.36 in. (60 mm). Be sure to drill into the center
of the studs.
4. Install wall plate using three lag bolts . Tighten the lag bolts only until they are pulled firmly
against the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
Go to STEP 3 on PAGE 14
5/32"
(4.0mm)
11
Wall plate
No!
2.36"(60mm)

CAUTION: Avoid potential personal injury or property damage!
● Mount the wall plate assembly directly onto the concrete surface
● Minimum solid concrete thickness: 8 in. (203 mm)
1. Position the wall plate on the wall at your desired height. Level the wall plate and mark the
hole locations.
2. Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.36 in. (60 mm).
2.36"(60mm)
3/8"
(10mm)
12
Wall plate

13
3. Insert four anchors.
CAUTION: Be sure the anchors are seated flush with the concrete surface.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
4. Insert wall plate using four lag bolts .Tighten the lag bolts only until they are pulled firmly
against the wall plate.
Wall plate
Please contact us at telephone [phone] (USA) or
mail to [e-mail]. to have these
additional pieces shipped directly to you.
Concrete Wall Anchor
(Not included)
No!

Before hanging TV, please try to pull the mount to make sure that it has been assembled on the wall
tightly.
14
Wall plate

15
TV
1 2

Loosen
Tighten
5-1 TV leveling adjustment (±4°):
Loosen 2 leveling bolts on the rear of TV plate by
maximum 2 turns, adjust to level, and retighten to secure.
16

5-2 Tilting angle adjustment (+5°/-15°)：
Pull TV to your desired angle then fasten 2 tilting bolts with allen key .
-15°
+5°
Tilting bolts
Handle
17

5-3 Cables manage:
Manage TV cables orderly and guide them through the velcros.
Velcro
18