Claybrook Altar User manual

1.08.21
Fitting Instructions
If you require any further assistance regarding specification data and technical advice please contact
us at [e-mail]
ALTAR HEATED TOWEL RAIL
Queensgate House, Cookham Road,
Bracknell, Berkshire, RG12 1RB
Tel [phone] Fax [phone]
www.towelrads.com
General Care and Safety Guide
Please read these instrucons carefully before installing and
operang the towel rail.
450 -17w, 630 - 23w
488101, 488105, 488103, 488106, 488104, 488100
488109, 488111, 488108, 488112, 488110, 488107
TOOLS REQUIRED (NOT SUPPLIED)
- Drill & Drill Bit
- Pencil
- Spirit Level
- Measuring Tape
- 12V Transformer
ELCOT
Heated Towel Rail
Installation Manual
Finishes Available: Chrome, Matt Black, Brushed Brass, Rose Gold, Polished Brass and Brushed Brass

If you require any further assistance regarding specification data, technical advice or samples,
please contact us at [e-mail]
ALTAR HEATED TOWEL RAIL
1.08.21
Fitting Instructions
Queensgate House, Cookham Road,
Bracknell, Berkshire, RG12 1RB
Tel [phone] Fax [phone]
www.towelrads.com
Installing your Towel Rail
Always choose a safe locaon for the Towel Rail, keeping in mind the
safety precauons outlined. The transformer must be installed in a
accessible and dry locaon.
WARNING: Installaon must be completed by a qualified professional electrician in line with current electrical
regulaons and local standards.
Switch off mains power to esure your safety before installing the Towel Rail.
Fix the wire from the wall to the terminal from the Towel Rail.
Fix the Towel Rail to the mounng base with hex screw at the boom
of the Towel Rail.
This guide shows the installaon of a single rail. Two or more rails can be installed together but must be wired in
parallel to each other.
Pre-wiring in the wall cavity or ceiling is required.
Measure and mark out bracket posions, making sure they are level.
Fix mounng bracket.
Fix the mounng round base to the wall with screws. Ensure the wire
from the wall reaches the connecon from the rail.

1.08.21
Fitting Instructions
If you require any further assistance regarding specification data and technical advice please contact
us at [e-mail]
ALTAR HEATED TOWEL RAIL
Queensgate House, Cookham Road,
Bracknell, Berkshire, RG12 1RB
Tel [phone] Fax [phone]
www.towelrads.com
Operang your Towel Rail
WARNING: Installaon must be completed by a qualified professional
electrician.
ELECTRICIAN INFORMATION
A copy of this User Manual should be le with the purchaser.
Each 12V Towel Rail installaon needs at least one 12V transformer.
The transformer must be located in a dry and accessible locaon.
Distance from the transformer to the Towel Rail must be less than 2 metres.
HEAT CONTROL
These
These Towel Rails run at a single temperature.
Please be aware they do get hot to the touch.
CAUTION: The Towel Rail generates heat during use. Proper precauons
must be taken to prevent the risk of burns, scalds, fires or other damages
to persons.
Do not aempt to dismantle the Towel Rail. there are no user serviceable
parts. For service or repair, contact an authorised electrical service
t
technician.
We have taken great care to ensure that this product reaches you in perfect condion. However should any parts
be damaged or missing please contact your point of purchase. This does not affect your statutory rights.
WARRANTY:
Towel Rails are guaranteed for 3 years for manufacturing defects
.
CARE AND MAINTENANCE
Regular cleaning with a so cloth will keep the surface of your Towel Rail looking new. Soapy water can be used to
remove stubborn stains and then buff dry.with a so cloth. Do not use abrasive or chemical cleaners to clean your
Towel Rail as these will damage the surface over me.