Clear One Unite 150 User manual

1
WALL MOUNT 150 UNITE
®
Q
UICK START GUIDE

2
WHAT’S INCLUDED:
Pieces Item
1 Wall Mount
1 Cross recessed, pan head with tail machine teeth screw, UNC 1/4’’-20*8
5 Cross recessed, pan head with dielectric flat tail machined screws,
PWM3*6
NOT INCLUDED:
* These screws need to be provided by the installer based on the thickness of the wall.
Caution: It is the responsibility of the installer to ensure the camera and its
mounting hardware are firmly secured, so that the camera does not fall.
Anchoring hardware appropriate to the wall type must be selected and
provided by the installer.
Pieces Item
4 *M5 expansion screws

3
INSTALLATION
Step 1.
a) Position mount on wall and mark wall for anchor placement.
b) Pre-drill holes in wall.
c) Secure mount to wall using M5 expansion screws (not included).
NOTE: Check depth of the mounting holes by inserting a straw or toothpick,
and measure against the length of screws.
Step 2.
a) Attach camera to mount.
b) Secure using PMW3*6 screws.

4
Service and Support
If you need assistance setting up or operating your product, please contact us. We welcome your
comments so we can continue to improve our products and better meet your needs.
Technical Support
Telephone: [phone]
E-mail: [e-mail]
Cable Access
Secures Camera to Count (1/4-20)
Camera Positioning Posts
© 2017 ClearOne Communications, Inc. All rights reserved. Information in this document is subject to change without notice.
Other product names may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or ClearOne’s products in the United States and/or other countries.
ClearOne Document: QSG-0046-001 Revision 1.0 June 2017.