Clever Little Monkey Bambu User manual

Bambu
Changing Table
Hardware list
Screw A
52pcs
N
Nut B
52pcs
Boards list
Tray
Part
Chest
Part

Installation instructions
Step% 1:" Assemble" the"tray"first," insert" two" side5boards" and"
bottom" board" by" inserting"screws" “A”" into" pre5drilled"
sockets,"and"tighten"with"nuts"“B”"in"a"clockwise"direction." %
Step% 2:% Insert"the"front"board," using" nuts" “B," tightening" in" a"
clockwise"direction.%
%
%
%
Step% 3:% "Turn" the" tray" upside" down," insert" nuts" “B”" to"
every"screw"hole,"then"tighten"clockwise." %
%
Step%4:%Assemble"the"changing"unit:%Insert"screws"“A”"in"each"
pre5installed"hole"as"shown"below"on"each"panel"
"
"
%
Step%5:%Lay"one"side"board"flat"and"insert"top"board,"bottom"
board"and"backing"board"over"the"screws"“A”."
Step%6:%Tighten"all"in"clockwise"direction"with"nuts"”B”%
"
"
"
"
"

%
%
Step% 7:"Install" two" middle" boards."Tighten" in" a" clockwise"
direction"using"nuts"“B”"
%
%
Step% 8:"Install"the" other" side" board,"tighten" in" a" clockwise"
direction"with"nut"“B”"
"
"
Step% 9:"Turn" the" changing" table" on" its" side" and" install"the"
front"board,"tightening"clockwise"with"nuts" " “B”."
Step%10:""Final"step:"Put"the"tray"on"the"changing"table."
"
"
"