Cloudinary 56402 User manual

123456789012345678901234567890121234567890123456789012345678901212345678901234

56402

Genius Stand

Assembly Instructions

AScrew M6X8mm 4 EA

A1 ScrewM8X40mm 4 EA

BKnob 2 EA

CThreaded Square Washer 2 EA

DCaster Wrench 1 EA

E5” Locking Caster 2 EA

F5” Caster 2 EA

GAllen Wrench 1 EA

P1 LeftLeg 1 EA

P2 RightLeg 1 EA

P3 Lower Cross Brace 1 EA

P4 Stability Panel 1 EA

P5 Short Bracket 2 EA

P6 Long Bracket 2 EA

Part Drawing Description Qty Part Drawing Description Qty

Hardware List

Do not use unless all screws are tight. At least every six months, check all screws to be sure

they are tight. If parts are missing, broken, damaged, or worn, stop use of the product

until repairs are made by your dealer using factory authorized parts.

Assembly Diagram

IdentifyandSeparateallthePartsandHardware.

1.)

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

Illustration # 2

Illustration # 1

2.)

3.)

Attach Left and Right Legs (P1 & P2) to the Lower Cross Brace (P3) using 4 screws (A1) as shown

inillustration#1. Fingertightenonlyatthis point.

DeterminetheheightyouwanttheStabilityPanel(P4)soitwillwork with your size board.

Attach the Stability Panel (P4) to the Left and Right Legs (P1 & P2) using 4 screws (A) as

showninillustration#2. TightenallScrewswithAllenWrench(G).

Small Board Location

Large Board Location

4.)

EIllustration # 3

P2P1

5.)

Illustration # 4

Illustration # 5

Attach 2 Locking Casters (E) and 2 Casters (F) to the bottom of the Left Leg (P1) &

RightLeg(P2)asshown in illustration #3. TightenallcasterswithCasterWrench(D).

6.) YourGeniusStandisshippedwithtwo Long

Brackets(P6)installedatthetop. Youmayneed

tochange these brackets and use twoShort

Brackets(P5)ifyourboardisthinner.

Seeillustration#5.

PlaceaThreadedSquare Washer(C)ontopof a Long Bracket(P6) andinsert both into one of

thebracketholdersat the bottom of the Stability Panel(P4). Secure the two using one

Knob(B)asshown in illustration #4. Repeat this Stepforthe other side.

26” 36”

68 1/2”

To 84 3/4”

32 1/4”

5” Casters

30 1/2”

2 5/8”

TO 5”

Note:

1/2”To

4 1/4”

See

Note

56402

Genius Stand

56402_04-25-14

YourGeniusStandis

shippedwithtwoLong

Brackets(P6)installed

atthetop. You may need

toswitchtheLong

Brackets(P6)out and use

twoShort Brackets (P5)if

yourboardisthinner.

30” to 46 1/4”

inHighSetting

45 1/4” to 61 1/2”

inLow Setting

Table of contents

Other Cloudinary Rack & Stand manuals

Cloudinary

Cloudinary WSP 420 User manual

Popular Rack & Stand manuals by other brands

Kogan

Kogan KAWLM70TLTA user guide

Markes International

Markes International U-RACK02 Instructions for use

Cooper Lighting

Cooper Lighting GR316 Specification sheet

EDI

EDI MX Series user manual

HUANUO

HUANUO HNCM5 instruction manual

Vivo

Vivo MOUNT-MACM1 instruction manual

Panasonic

Panasonic TY34WDM60J - STAND FOR CT34WDM60 Assembly instructions

Pioneer

Pioneer PDK-FS02 operating instructions

IBM

IBM S822LC Quick install guide

Philips

Philips LCA2210 user manual

HumanCentric

HumanCentric 101-2060 manual

Screen Technics

Screen Technics Interfit Projector Lift manual

LEGRAND

LEGRAND CHIEF HTSTS installation instructions

Clas Ohlson

Clas Ohlson PSW007M manual

ricoo

ricoo TS7111 quick start guide

Velleman

Velleman HQMS10010 user manual

GW Instek

GW Instek GRA-408 Assembly guide

Vega

Vega SHLM MI4 operating instructions