1) Engage dealer or specialist for installation. If installation done
leakage, electrical shock fire. is del'ec1we it
2) Install according to this installation instructions
leaka
e,
electrical shock fire. If installation is detective. it will cause water
water
3) Use the attached accessories parts and specified
water leakage, electrical shock fire. for installation.
nthQI"\AIIC!Q
cause the set to
4) Install at a strong and firm location which is able to withstand the set's
or
installation is not properly done, the set will drop and cause
5) For electrical work, follow the local national
independent circuit and single outlet must be and this installation instructions. An
in electrical work, it will cause electrical shock fire.
6) Use the specified cable and connect tightly and the cable so that
no
external force
the terminal.
If
connection
or
fixing is not
or
fire at the connection.
7) Wiring routing must be properly arranged so that control board cover is fixed
nrnncrl\l
is not fixed perfectly, it will cause heat-up
at
connection
of
fire or
.olot"'trlt"'!:!1
8) When carrying out piping connection, take care not to let air substances other than the
refrigerant go into refrigeration cycle. Otherwise, it will cause lower capacity, abnormal
in
the refrigeration cycle, explosion and
9) Do not modify the length
of
the power
single outlet with other electrical appliances. cord or use
of
extension and do not share the
it will cause fire
or
electrical shock.
found
on
1) This equipment must be earthed and installed with earth current breaker. It may cause electrical
shock if grounding
is
not perfect.
2) Do not install the unit
at
place where
of
flammable gas may occur. case gas leaks and
accumulates at surrounding
of
the unit, it may cause fire.
3) Carry out drainage piping as mentioned in installation instructions. If water
may enter the room and damage the furniture.