CAREFULLY READ THESE INSTRUCTIONS IN THEIR ENTIRETY
BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
IMPORTANT SAFEGUARDS
Installation of fans and electrical work may present a possible shock or fire
hazard if improperly installed or used. All electrical work should be performed
in accordance with all federal, state and local safety regulations and require
proper grounding. All work should be performed by a certified electrician.
Before starting installation, turn OFF electricity at the main fuse or circuit
breaker that controls the power to the fixture/room you are working on.
Means for disconnection must be incorporated in the fixed wiring in accordance
with wiring rules. Fans and light MUST be grounded. Bracket MUST be firmly
attached to a solid structure and MUST be nailed between beams if timber
option is required.
All set screws must be checked and retightened where necessary
before installation.
SAFETY
Only approved COCOWEB speed controllers should be used for the
operation of COCOWEB fans. The use of unauthorized controllers will
void the warranty.
DO NOT mix blades from one fan to another. All blades MUST be
replaced if damaged.
To reduce the risk of personal injury, do not bend the blade brackets when
installing the brackets, do not balance the blades, and do not clean the fan while
it is in motion. Do not insert foreign objects in between rotating fan blades.
WARNING
1
•
•
•
•
•
•
