Colordreamer DP250 User manual
DMX Pixel Board-DP250/DP300
Static White/RGB
Client
Project
Order Code
QTY
Thank you for purchasing the Colordreamer DMX Pixel Board
Our manual will describe the installation and mounting of the product as well as a descriptio
n of how to use it.
Please read and understand this manual in its entirety before using the product.
Product Warranty is void if product is not installed as per installation instructions and in
compliance with all local and provincial codes.
SAFETY RECOMMENDATIONS AND WARNINGS
Do not handle except at a static free workstation or wearing anti-static wrist strap
Do not make modifications or alter the product
Keep away from flammable material.
Dot not use products if cable or connector are damaged
Dot not drop, knock or shake the products. Rough handing can damage the electronics.
Do not use any silicone or other chemicals on outside surface.
Do not use chemicals or abrasives to clean the luminaires as this many voids the warranty.
Ensure installation complies with local electrical rules and regulations.
Ensure mains input power is surge protected
Do not connect or disconnect the luminaire while the power is connected.
Connectors are to be kept clean and dry at all times.
Input Voltage range 15-24VDC
Colordreamer Products are cooled by convection. Provide adequate ventilation by providing
free air flow around.
If the ambient temperature around the luminaires exceeds 55degrees, do not use the
products and turn off the system.
Power off the luminaires during service or when not in use.
For best color mixing results, ensure the boards have the same orientation.
Product Overview
The Colordreamer DP250/DP300 LED Pixel Board features 36 individually controllable SMD
LEDs on a 6 X 6 matrix with 41.66mm or 50mm pitch. Size 250X250mm or 300X300mm
available.
Product Specification
Models DP2503603 DP3003603
LED
Color RGB RGB
Light Source Epistar or CREE LED Epistar or CREE LED
Color R:619-624nm
G:520-540nm
B:460-480nm
R:619-624nm
G:520-540nm
B:460-480nm
LED QTY 36LEDs 36LEDs
Performance
Lumen Output Update soon Update soon
Efficacy Update soon Update soon
Beam Angle 115° 115°
Electrical
Input Voltage 15-24VDC 15-24VDC
Power Consumption 8W 8W
Control
Protocols DMX512 Control DMX512 Control
PWM Frequency 1KHz@16-Bit Grayscale/256KHz@8-Bit Grayscale
Addressing Auto Addressing or Manual Addressing with Colordreamer
Addressing Tool
Physical
Material FR4 PCB Board
Finish Color Black/White
Optics Open
Dimensions (LXWxH) 250*250mm 300*300mm
Cable Entry Side Entry
Mounting Surface Mounted
Packing Package Size 53*36*36cm
Environment
Operating
Temperature
-30℃ to +50℃
Storage Temperature
-40℃ to +70℃
Humidity 0-90% non-condensing
IP Rating Dry, Indoor/IP20
Certification and Safety
Certification CE/ETL
Warranty 2Years Limited Warranty from the Date of Manufacture
Contact us if you need extended warranty
Remark: The given data of CCT, beam angles, lumen output and electrical power are typical
value. Due to the tolerances of the production process and the electrical components, the
values can vary up to 10%.
System Diagram
Option1:
Option2:
The wiring diagram shows only typical connection. Actual wiring depends on production
configuration and installation on site.
PIN Designations
P1(IN) Description P2(OUT) Description
DC24V 24VDC DC24V 24VDC
DI+ DMX IN+ DO+ DMX Out+
DI- DMX IN- DO- DMX Out-
GND GND GND GND
Maximum Circuit Loading-Single Run
Maximum Current Through cables and connectors≤5A
LED Power Maximum Leader Cable Length
from Junction Box to First Fitting
Max Daisy Chain Length with Signal
Power Feed
8W per dot 20meter 4pcs
Values are based on end to end spacing. Extended cables or jumper cables will affect loading.
Accessories List (Need Order Separately)
Name Order Code Description
Leader Cable 67E2FB-20CM IP67 Connector,20cm Long 2PIN Female to open wire
Leader Cable 67E2FB-5M IP67 Connector,5Meter Long 2PIN Female to open wire
Leader Cable 20E4FB-20CM IP20 Connector,20cm Long 4PIN Female to open wire
Leader Cable 20E4FB-5M IP20 Connector,5Meter Long 4PIN Female to open wire
Jumper Cable
67E2M2F-5M IP67 Connector,5Meter Long 2PIN Male to 5PIN Female
Jumper Cable
20E4M4F-5M IP20 Connector,5Meter Long 4PIN Male to 4PIN Female
IP67
Connector to
XLR Cable
67E4F5XM-
20CM
20CM Long 4PIN IP67 Female Connector to XLR 5PIN
Male Cable
IP67
Connector to
XLR Cable
67E4F5XM-5M
5M Long 4PIN IP67 Female Connector to XLR 5PIN Male
Cable
Power Injector
Y Cable
67T4M4F2M IP67 Connector,15CM 4PIN Male for LED;15CM 4PIN
Female for LED;15CM 2PIN Male for Power
This manual suits for next models
3
Table of contents
