comfortel VENICE User manual

These instructions show how to install and maintain your Comfortel product.
Specic adjustments vary according to each model.
www.comfortel.com.au
OWNERS GUIDE
WORK STATIONS
VENICE

2
www.comfortel.com.au
CONTENTS
NOTE
PURCHASE DATE ..............................................................................................
INVOICE NUMBER ...........................................................................................
WARRANTY PERIOD BY PRODUCT........................................ 3
SAFETY PRECAUTIONS........................................................... 4
VENICE
VENICE.................................................................................. 5
VENICE ASSEMBLY ................................................................ 6
MIRROR INSTALLATION......................................................... 7
MOUNTING TO WALL............................................................ 8
POSITIONING ........................................................................ 9
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE ....................................... 10

3
www.comfortel.com.au
WARRANTY PERIOD BY PRODUCT
NOTICE
The information contained in this document is subject to change without notice and should not be construed as a commitment by
Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in this document nor does it make expressed or
implied warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and
tness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages in connection with or arising out of the use of
this document and the program material.
PERIOD AND DESCRIPTION PRODUCTS
12 MONTHS PARTS AND LABOUR All products
2 YEARS PARTS ONLY All products excluding small electrical appliances
3 YEARS PARTS ONLY All electric actuators
5 YEARS PARTS ONLY Taps cartridge, Ceramic basins
10 YEARS PARTS ONLY Taps – all parts excluding the cartridge Gas-lis and gas-li swivel plates
TERMS AND CONDITIONS
SEE WARRANTY CARD FOR MORE DETAILS ON TERMS AND CONDITIONS.
For more information about our warranty, see our warranty card, which is available from Comfortel or contact us at
www.comfortel.com.au.
All rights are reserved. No part of this document may be photocopied, reproduced or
translated to another language without prior written consent of Comfortel Furniture Pty Ltd.

4
www.comfortel.com.au
SAFETY PRECAUTIONS
LISTED BELOW ARE ESSENTIAL SAFETY PRECAUTIONS:
GENERAL SAFETY
1. Read carefully and keep these instructions in a safe place.
2. Use this product only for its intended function and do not use
attachments not recommended by the manufacturer.
3. Do not use outdoors.
ELECTRICAL APPLIANCES
4. All GPO’s must be installed by a qualied Electrician in
accordance with Australian standards.

5
www.comfortel.com.au

Dimensions:
W: 76cm H: 180cm
Bench:
Depth: 28cm
Code: 8800
VENICE
The gorgeous Venice range of mirror workstations will bring style sophistication to any hair salon. With fully upholstered edges, clean
lines, modern design and versatility to suit any salon design.
VENICE

6
www.comfortel.com.au
VENICE ASSEMBLY
x2x2x1x1 x1x4 x4
6
6
5
5
7
7
7
7
6
6
x2
1 2 3 4 5 6 7 8
7
4
1
1
2
2
3
5
4
5
7
IMPORTANT
IF INSTALLING MIRRORS ON DOUBLE FRAMES,
PLEASE DISCARD THE BLACK STEEL FRAME PACKED
WITH YOUR MIRROR. THE BLACK STEEL FRAME PACKED
WITH YOUR MIRROR IS FOR WALL MOUNTING ONLY.
ASSEMBLY
1. Venice Steel Frame x1
2. Venice mirror x1
3. Venice bench x1
4. Steel pins x2
5. Small pin screws x4
6. Large screws x4
7. Foam mirror support x2
8. Allen Key x1
DIAGRAM A
Front view
DIAGRAM B
Contents
x2x2x1x1 x1x4 x4
6
6
5
5
7
7
7
7
6
6
x2
1 2 3 4 5 6 7 8
7
4
1
1
2
2
3
5
4
5
7

7
www.comfortel.com.au
MIRROR INSTALLATION
IMPORTANT
IF INSTALLING MIRRORS ON DOUBLE FRAMES,
PLEASE DISCARD THE BLACK STEEL FRAME PACKED
WITH YOUR MIRROR. THE BLACK STEEL FRAME PACKED
WITH YOUR MIRROR IS FOR WALL MOUNTING ONLY.
ASSEMBLY
1. Venice Steel Frame x1
2. Venice mirror x1
3. Venice bench x1
4. Steel pins x2
5. Small pin screws x4
6. Large screws x4
7. Foam mirror support x2
8. Allen Key x1
x2x2x1x1 x1x4 x4
6
6
5
5
7
7
7
7
6
6
x2
1 2 3 4 5 6 7 8
7
4
1
1
2
2
3
5
4
5
7
DIAGRAM C
Back view

8
www.comfortel.com.au
MOUNTING TO WALL
MOUNTING TO WALL STEPS
1. Position frame on wall 300mm
2. Using xings (Not supplied), secure frame to wall
3. Slide mirror over pins and position onto Venice wall frame
4. Secure mirror on Venice steel frame using screws provided
5. Slide bench onto steel pins
DIAGRAM D
Back view
300mm
Floor
Wall
760mm
IMPORTANT
WALL FIXINGS NOT SUPPLIED.
WALL STUDS AND NOGGINS ARE NOT
REQUIRED WHEN INSTALLING MIRRORS
VENICE STEEL FRAME

www.comfortel.com.au
9
POSITIONING
IMPORTANT
ELECTRICALLS MUST BE INSTALLED BY A QUALIFIED
ELECTRICIAN IN ACCORDANCE WITH AUSTRALIAN STANDARDS.
1800mm300mm
760mm
280mm
1800mm300mm
Wall
Floor Floor
760mm
Chair Chair
1300mm - 1500mm
280mm
760mm
Spacing
DIAGRAM E
Side view
DIAGRAM G
Floor view
DIAGRAM F
Front view

10
www.comfortel.com.au
CLEANING AND MAINTENANCE
VINYL
Aer every client, the vinyl must be cleaned.
All upholstery needs some care; good housekeeping will help to prolong the life
of any upholstered products.
Avoid extreme temperatures. Extreme cold can make your vinyl prone to
cracking, while extreme heat can cause permanent stretching.
Avoid exposing your products to direct sunlight for prolonged periods of time.
ALWAYS FOLLOW THE CLEANING INSTRUCTIONS
• Clean regularly (weekly) to remove body oils which cause hardening
• To clean use a sponge which has been moistened in warm soapy water
• Aer cleaning with a sponge, dry with a so, clean cloth
• Stubborn grime may require gentle scrubbing with a so brush
MAINTENANCE
A periodic inspection of all components and fasteners should
be made to ensure that your washlounge is structurally intact
and functioning properly. Damaged and broken parts should
be replaced and loose fasteners tightened.
All maintenance to be carried out by a suitably qualied tradesperson.
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.
For more information about our products and services, visit our showroom or to
contact us visit us at: www.comfortel.com.au.
Please note: your warranty does not cover wrinkling, creasing, soiling, fading, pulls,
tears or cuts. Fair wear and tear is not covered by your warranty.
CLEANING AND MAINTENANCE

www.comfortel.com.au
11

Last Updated: 19/08/15
CONTACT US
www.comfortel.com.au
VIC Showroom
10/126-134 Fairbank Rd
Clayton South VIC 3169
Ph: 03 8581 8111
NSW Showroom
64 Hotham Pde
Artarmon, NSW 2064
Ph: 02 9966 5900
QLD Showroom
Unit 18, 6 Maunder St
Slacks Creek, QLD 4127
Ph: 07 3209 1444
SA Showroom
101 Grange Rd
Allenby Gardens, SA 5009
Ph: 08 7225 8998
WA Showroom
2&4, 25 Catherine St
Bentley, WA 6102
Ph: 08 9258 4446
NZ Showroom
23 Church St
Onehunga, Auckland, NZ
Ph: 09 525 3357