Concourse Vogue User manual

SEAT INSTALLATION
INSTRUCTIONS
1300 650 059 | concoursegolf.com

5.0 Place the seat post into the
rectangular mounting bar socket as
indicated below with the logo at the top
of the seat facing outwards so access to
the storage compartment is convenient.
4.0 Ensure that the mounting bar extends
horizontally with the ground, to align
with the wheel. Once positioned
correctly tighten the grip so it remains in
the correct position.
6.0 Now check that there is at least 85mm
clearance from the bottom of the seat to
the ground. This helps reduce the chance
of the base catching on uneven terrain
and seat swivelling around.
1.0 Remove all contents from packaging
and check that you have the following
items.
2.0 The seat should be installed on the
right side of your buggy (looking from
the rear with the handle infront of you). It
attaches via the vertical bar as indicated.
For customer support or product enquiries, please contact Concourse Golf.
3.0 Using the allen key provided, undo the
2 mounting screws which allow the grip on
the mounting bar to open.
Position the grip on the mounting bar
30mm above the join where the vertical
bar meets the horizontal base bar as
indicated below.
Seat
Seat Mount Bar
Allen Key
30mm
Attach here
Finally, check that the mount is
securely attached.
85mm
1300 650 [e-mail]