CondoMounts CLMMMA2022 User manual

SA-GA12WA05
0-8kgs/0-17.6lbs
Load
15” - 32” 75/100/200
VESA
-90°/+85°
T
ilt 180°
Swivel
Rotate
360°
Gas Spring Monitor Wall mount
gnidivorp ot detacided si llAgnippohS .tcudor p ruo gnisoohc rof uoy knahT
the highest level of quality and service to our customers. If you are satisfied
? nozamA no kcabdeef ruoy erahs yldnik uoy dluow , meti eht htiw
Please do not hesitate to contact us if you have any issue.
Call: [phone]
Mon-Fri 8:00am – 9:00pm (Eastern Time) (Canada/USA)
Installation V
Email: [email protected] Website: www.ShoppingAll.com ideo
Column Monitor Mount
US PATENT NO. US11221102B2
WARNING STATEMENTS
PRODUCT LINE GRAPH
01
183.5mm/7.2”
90°
85°
180°
360°
0-355mm/0-14.0”
360°
Warning
Prior to the installation of this product, the installation instruction must be read
and completely understood. Failure to do so may result in personal injury,
property damage or voiding of manufacturer warranty.
Do not install on a structure that is prone to v ibration, or movement. Reinforce
the structure as required before installation.
Pay attention to the weight capacity of the mount. Exceeding the limitation can
result in impairment or serious injury and property damage.
Never operate the mount if parts are missing or damaged. Contact your local
service center for warranty service.
Do not use this product for any purpose or in any configuration not explicitly
specified in this instruction. We hereby disclaim any and all liability for injury or
damage arising from incorrect assembly, Incorrect mounting, or incorrect use of
this product.
Recommended mounting surfaces: Wooden studs or solid-flat concrete. If the mount
is to be installed on any surface other than wooden studs, use suitable hardware.
US PATENT NO. US11221102B2
Column Monitor Mount
Load
20 kgs/44 lbs
CLMMMA2022
Need Help? Contact our pros:
647-557-5699 [email protected] condomounts.com
Installation Video

WARNING S TATEMENTS
PRODUCT LINE GRAPH
01
183.5mm/7.2”
90°
85°
180°
360°
0-355mm/0-14.0”
360°
Warnin g
Prior to the installation of this product, the installation instruction must be read
and completely understood. Failure to do so may result in personal injury,
property damage or voiding of manufacturer warranty.
ecrofnieR .tnemevom ro ,noitarbiv ot enorp si taht erutcurts a no llatsni ton oD
the structure as required before installation.
Pay a tten tion to t he weigh t c apaci ty of t he moun t. Exc eeding the limi tation can
.egamad ytreporp dna yrujni suoires ro tnemriapmi ni tluser
Do not use this produ ct for any purpose or in any con figura tion not explici tly
speci fied in this instruction. We hereb y disclaim any and all liabili ty for injury or
this produc t.
Re commended moun ting sur faces: Wooden stud s or solid- flat con crete. If the moun t
is t o be ins talled on any sur face other than wooden st uds , use sui table hardware .
Never operate the mount if parts are missing or damaged.
damage arising from incorrect assembly, incorrect mounting, or incorrect use of
Change Fonts- Standardi e to a nice font
remove gaps
remove
remove
PRODUCT LINE GRAPH
01
WARNING STATEMENTS
Prior to the installation of this product, the installation instruction must
be read and completely understood. Failure to do so may result in
personal injury, property damage or voiding of manufacturer warranty.
Pay attention to the weight capacity of the mount. Exceeding
the limitation can result in impairment or serious injury
and property damage.
Never operate the mount if parts are missing or damaged.
Do not use this product for any purpose or in any conguration not
explicitly specied in this instruction. We hereby disclaim any and all
liability for injury or damage arising from incorrect assembly, incorrect
mounting, or incorrect use of this product.
Warning
183.5mm/7.2”
90°
85°
180°
360°
0-355mm/0-14.0”
360°
3.5”/9cm
3”/7.5”

M4x12 (x4)M4x8 (x4) M4x30 (x4)
a
e
c
b
d
(x2)
(x1)
(x1)
M8x16 (x2)
12X5.8X16 (x4)
A
B
C
(x1)
S=3mm (x1)
S=5mm
D
E
F
H
I
(x1) (x1)
M5 (x4) M5 (x4)
Extra screw
(x2)
M5x6 (x3) (x1)
02
PARTS INCLUDED

STRAP & COLUMN MOUNTING BRACKET INSTALLATION
FREE END
OF STRAP
Hold column mounting bracket to the column
where you would like to mount the monitor
03
Ask a second person to wrap the strap
around the column
STEP 1
STEP 2

Person #2 should insert free end of strap
into the slot of the ratchet buckle
04
STEP 4
STEP 3

05
STRAP & COLUMN MOUNTING BRACKET INSTALLATION
STEP 5

C
M8x16
M5x6
M5x6
I
ARM INSTALLATION
06
STEP 1
STEP 2
Insert and fasten the screw
through the washer and put on
the plastic connection cap.
Insert the Extention Arms to the wall plate and Put Spring Arms onto the
extension arm.
Cable Management Installation

M4x12
M4x8
A
B
M4x30
12X5.8X16
H
OR
MONITOR INSTALLATION
Attach adaptors if 200 x 200 VESA is required.
07
STEP 1
STEP 2
Flush Surface Installation: Install 4 screws through faceplate to monitor via
mounting holes.
Recessed Surface Installation: Put 4 spacers between faceplate and
monitor. Install 4 screws through faceplate, spacers to monitor via mounting
holes.

MONITOR INSTALLATION
08
STEP 3
S=5mm
Lift the VESA plate along with monitor and put it on head slot.
GAS SPRING TENSION ADJUSTMENT
Press down the
arm to a horizontal
position
Be sure to keep the arm in horizontal
position during adjustment. Or else, it
would be difcult to adjust the mount.
1 turn ≈ 1 lbs ≈ 0.4kg
NOTE: Turn clockwise to reduce
tension for lighter monitors and
counter-clockwise to increase
tension for heavier monitors.
Use a hex wrench to adjust the height tension of the gas spring arm after
the monitors are installed, to keep different weight of monitors
still at any position.

TILT & SWIVEL ADJUSTMENT
09
CABLE MANAGEMENT INSTALLATION
D
S=3mm
S=5mm
S=5mm
S=5mm
S=3mm
VESA Tilt Adjustment
VESA Swivel
Adjustment
Arm Swivel Adjustment
Tighten the bolt with the Allen Key to make the tilt and swivel adjustment.
Route the cables along the mounting arm.