Connects2 Vision CAM-SU2-AD User manual

Subaru
WRX 2016 > Forester 2017 - 2018
WRX (with Nav) 2015 > Impreza 2015 - 2016
XV Crosstrek 2015 >
Allows the retention of an OEM reverse camera when installing an aftermarket
head unit.
Note: for vehicles with base model 6.2” radio screen.
User Manual
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
The place of installation must be free of moisture and away from heat sources. Please
ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Reverse Camera Interface
For select Subaru vehicles
APPLICATION:
DISCLAIMER:
CAM-SU2-AD

www.connects2.com
2
Connects2Vision
CONTENTS
• Reverse Camera Interface
• Instructions
INSTALLATION
1. Connect the black wire on the CAM-SU2-AD to a source of Ground.
2. Connect the black wire from the voltage dropper to a source of Ground.
3. Connect the red wire on the CAM-SU2-AD to the blue/red wire on the
voltage dropper.
4. Attach the blue/white wire on the voltage dropper to a source of accessory
power.
5. Connect the male yellow RCA connector on the CAM-SU2-AD to the
aftermarket camera camera input.
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2