converted DZ41 User manual

1
DZ41 DISPLAY
USER MANUAL

2
Find us on your favourite social media channels
Tag your posts with #Convertedbikes
FOLLOW THE CONVERTED
LOVE YOUR CONVERTED BIKE?
SHOW US YOUR ADVENTURES
#Convertedbikes

3
DISPLAY OVERVIEW 4
MAIN USER SCREEN 6-8
-TURNING THE SYSTEM ON AND OFF
-VIEWING THE MAIN USER INFORMATION
-SETTING THE PEDAL ASSIST LEVEL
-LIGHTS
-WALK ALONG
-BATTERY LEVEL INDICATOR
ADJUSTING SETTINGS 9-10
-UNITS
-AUTO OFF
-WHEEL DIAMETER
-ASSIST SPEED-LIMIT SETTING
-LIGHT SENSOR
DATA RESET 11
FAULTS 12
-TROUBLE SHOOTING
-ERROR CODES
CONTENTS

4
DISPLAY OVERVIEW
POWER ON/OFF
ASSIST LEVEL UP
/LIGHTING (2 SEC)
ASSIST LEVEL DOWN
/WALK (2SEC)
MODE
66.5mm
49.3mm
46.9mm

5
REALTIME INFO
RUNNING SPEED /AVERAGE
SPEED /MAX SPEED
PEDAL ASSIST LEVEL
0 NO ASSIST - 5 MAX ASSIST
BATTERY LEVEL
LIGHTS ON/OFF
TRIP / ODOMETER

6
VIEWING THE MAIN USER INFORMATION
After starting up the display the default main user screen is ‘speed’.
Press Mode to change the indicated information in sequence as below:
Running Speed + Trip Distance> Average Speed + Trip Distance >Max
Speed + Odomater Distance .
TURNING THE SYSTEM ON AND OFF
Ensure the switch on the battery is in the ‘On’ position.
Hold the Display Power button for 2 seconds then the display will power
on.
With the display on, holding the Power button for 2 seconds will turn off
the system.
Additionally, you can shut the system down by turning the battery off.
MAIN USER SCREEN

7
SETTING THE PEDAL ASSIST LEVEL
Adjusting the assist level sets the amount of motor power that assists
your pedalling.
Press + (UP) or - (DOWN) to change the output power of the motor. The
power ranges from level 0 to level 5. Level 0 deactivates the pedal assist
system. Level 5 is the maximum power.
LIGHTS
Hold the + button for 2 seconds to turn on the Converted System riding
lights and display back light. The light symbol will show when on.
Hold the + button for 2 seconds to turn the lights off.
Converted System lights can be purchased from
www.converted.co.nz or dealers.

8
WALK ALONG
Hold the - button down to cause the bike to move along at walking
speed.
BATTERY LEVEL INDICATOR
The 5 battery bars represent the capacity of the battery.

9
UNITS
In the ‘OF’ mode, use the + or - buttons to adjust the Auto-Off time
(the time it takes to auto shut down when no input is provided).
default is 5 Minutes, choose between 1, 2, 3, 5, 8 or 10 minutes.
Press Mode to conrm the modication and go to the next setting.
In the ‘UN’ (unit) mode, use the + or - buttons to toggle between
KM/H and MPH
Press Mode to conrm the modication and go to the next setting.
Enter and adjust within the settings menu.
SETTINGS
AUTO-OFF
1.
2. Press and hold
Immeditiately
(before 10 seconds)
Turn the system on, within 10 Seconds press and hold Mode. The
screen will switch to the ‘setting’ mode, starting at UN(units). Press
Mode again to conrm the modication and go to the next setting.

10
WHEEL DIAMETER SETTING
In the IN mode press + and - to select the correct value to match the
wheel diameter. Selectable values include: 14, 16, 18, 20, 22, 24, 26,
27.5, 700C, 28, 29.
Press Mode to conrm the modication and go to the next setting.
ASSIST SPEED-LIMIT SETTING
LIGHT SENSOR
When the running speed is faster than MAX SPEED, the controller will
cut off the motor power. MAX SPEED default setting is 25Km/h. Press
+/- to select the desired value. 99Km/h is unlimited.
Press Mode to conrm the modication and go to the next setting.
It is possible to set the display backlight (and riding lights if tted) to
automatically turn on when its dark.
In ‘LS’ mode, toggle the light sensor On-Off
Hold down Mode for over 2 seconds to
conrm and quit the setting mode.

11
CLEARING TRIP METER, MAX AND AVERAGE SPEED
Turn the system on, AFTER 10 Seconds press and hold ‘M’.
The screen will switch to the ‘data clear’ mode, alternately showing
Max/average speeds and the trip meter.
Press ‘M’ to clear data and exit to the main user mode.
After 5 seconds and no key press, the display will switch back to main
user mode without clearing data.
1.
2. Press and hold
after waiting 10
Seconds
DATA RESET

12
FAULTS
TROUBLE SHOOTING
My bike won’t go!
1. Ensure the battery is charged by pressing the battery level
indicator button on the side of the battery.
2. Follow the cables on the bike and make sure no plugs have
been pulled out.
3. Make sure that brake levers are in their ‘out’ position.
Disconnecting the brake lever plug can help remove this as a
potential issue.
4. Contact your Converted System dealer.
ERROR CODES
If the system detects an electrical issue, an error code will show up on
the display. This can assist in determining the fault and will self clear
after the fault has been xed.
04 Throttle not returning
Check for obstruction or damage to throttle movement.
Replace throttle.
05 Throttle sensor problem
Replace throttle.
06 Low voltage protection
Flat battery or incorrect battery. Change battery. Check for
battery connections for corrosion.
07 Over voltage protection
Incorrect battery. Use correct battery.

13
08 Motor sensor problem
Contact service center.
09 Motor wire problem
Contact service center.
11 Temperature sensor problem
Contact service center.
12 Current sensor error
Contact service center.
14 Motor Temperature error
Contact service center.
21 Speed sensor problem
Check speed sensor is close to magnet on wheel. LED on
sensor should ash when magnet passes. If no ash,
replace sensor.
30 Communication problem
Check all plugs. Check cables for damage. Contact service
center..
Contact us at
[e-mail]
FindyourlocaldealerthroughourConvertedwebsite
www.converted.co.nz