Safeline Fd4-can User manual

www.safeline-group.com

accessories are copyrighted by law.

Reliability – brought to you from Tyresö, Sweden

Floor display

FD4-CAN v.2.01 EN

FD4-CAN

Manual

2FD4 -CAN v.2.01 EN

Introduction

Content Introduction

Technical data 3

General information 4

Installation

Wiring instructions 5

LED 6

Settings 7

Conguration

Programming 8

Conguration  9

Certicate

Programming 10

FD4-CAN

FD4 -CAN v.2.01 EN

Introduction

Power: 19-28 VDC

Size (H x W x D): 61 x 80 x 25 mm

Current consumption, standby: 120 mA / 24 VDC

Max output current on each output: 200 mA

Max output current for the card: 1 A / 24 VDC

Power input: 20-30 VDC

Input current on each input: 8 mA / 24 VDC

SD-card: Kingston and Verbatin 1, 2 or 4 GB

Speaker output: 0,6Wat8Ω

0,3Wat16Ω

All outputs are shortcut protected.

Technical data

4FD4 -CAN v.2.01 EN

Introduction

This unit was built with state-of-the-art technology and to

generally recognised safety related technical standards currently app-

licable. These installation instructions are to be followed by all people

working with the unit, in both installation and maintenance.

It is extremely important that these installation instructions are made

available at all times to the relevant technicians, engineers or servicing

and maintenance personnel. The basis prerequisite for safe handling

and trouble free operation of this system is a sound knowledge of the

basic and special safety regulations concerning conveyor technology,

and elevators in particular. The unit may only be used for its intended

purpose. Note in particular that, no unauthorised changes or additions

may be made inside the unit or individual components.

Exclusion of liability

The manufacturer is not liable with respect to the buyer of this product

or to third parties for damage, loss, costs or work incurred as a result of

accidents, misuse of the product, incorrect installation or illegal chang-

es, repairs or additions. Claims under warranty are likewise excluded in

such cases. The technical data is the latest available. The manufacturer

accepts no liability arising from printing errors, mistakes or changes.

Declaration of conformity

Download ”The declaration of conformity” at our website:

www.safeline-group.com

Safety Precautions!

- Only trained professionals, who are authorised to work on the equip-

ment,shouldinstallandcongurethisproduc t.

- This quality product is dedicated for the lift industry. It has been

designedandmanufacturedtobeusedforitsspeciedpurposeonly.

If it is to be used for any other purpose, SafeLine must be contacted in

advance.

-Itshouldnotbemodiedoralteredinanyway,andshouldonlybe

installedandconguredstric tlyfollowingtheproceduresdescribedin

this manual.

- All applicable health and safety requirements and equipment

standards should be considered and strictly adhered to when installing

andconguringthisproduct.

-Afterinstallationandcongurationthisproductandtheoperation

of the equipment should be fully tested to ensure correct operation

before the equipment is returned to normal use.

Electrical and electronic products may contain materials, parts and

units that can be dangerous for the environment and human health.

Please inform yourself about the local rules and disposal collection

system for electrical and electronic products. The correct disposal of

your old product will help to prevent negative consequences for the

environment and human health.

General

information

20-30 VDC

CAN H

CAN SHLD

CAN L

IO4

IO3

IO2

IO1

20-30 VDC

CAN H

CAN SHLD

CAN L

SPK

TERM

SD-CARD

RUN ERR

0 V

CAN L

CAN H

20-30 VDC

0 V

CAN L

CAN H

20-30 VDC

0 VDC