Hyundai S465D User manual

Type No. LT46DW001
Model. S465D
Multi Function 2D/3D Wide Monitor
User’s Guide

U.S.A.
U.S.FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
INFORMATION TO THE USER
NOTE : This equipment has been tested and found to comply with the limits for
a Class A digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet of a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/Monitor technician for assistance.




Changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Connecting of peripherals requires the use of grounded shielded signal cables.

DECLARATION OF CONFORMITY
WE HYUNDAI IT CORP.
Ami-ri Bubal-Eub Ichon-Si Kyungki-Do
467-860 KOREA
declare under our sole responsibility that the product:
Kind of equipment : LCD MONITOR
Type-Designation : LT46DW001
to which this declaration relates is in conformity with the
following standard(s) or other normative document(s)
Safety : EN 60065:2001+A1
EMC : EN 55022/1998+A1:2000+A2:2003
EN 55024 :1998+A1:2001+A2:2003
EN 61000-3-2:2006
EN 61000-3-3:1995+A1:2001+A2:2005
following the provisions of the Low Voltage Directive 73/23/EEC,
93/68/EEC and the EMC Directive 89/336/EEC.
Accredited testlaboratory:
TÜV Rheinland
Am Grauen Stein
51105 Köln
KOREA / January 30, 2009 Jong Won, Choi Ho Suk, Chon
(Place and date of issue) (Name and signature of authorized person)

S465D
Multi Function 2D/3D Wide Monitor
Contents
S465D
Multi Function 2D/3D Wide Monitor
1. Introduction ................................................................ 1/51
2. Safety Information ..................................................... 1/51
3. Safety Tips................................................................... 7/51
4. Handling Instructions ................................................ 8/51
5. 3D Monitor Setting Guide.......................................... 8/51
6. Q&A for 3D Mode....................................................... 9/51
7. 3D Mode Specification ............................................. 11/51
8. Installing the monitor............................................... 12/51
9. Title and function of each part................................ 14/51
Front .......................................................................................... 14/51
Rear............................................................................................ 15/51
Remote Control......................................................................... 16/51
How to insert batteries ............................................................ 16/51
10. How to connecting Digital RGB (HDMI)................ 17/51
HDMI PC Timing........................................................................ 18/51
HDMI Video Timing .................................................................. 18/51
11. How to connecting analog RGB (PC D-SUB) ......... 19/51
Support timing for PC............................................................... 20/51
12. How to connecting the component ...................... 21/51
Support timing for component................................................ 22/51
13. How to Connecting the S-Video or Video ............ 23/51
14. Adjusting OSD and explanation of its function ... 24/51
15. 3D Setting ............................................................... 40/51
16. Display power management.................................. 46/51
17. Troubleshooting...................................................... 47/51
18. Specifications .......................................................... 51/51

S465D
Multi Function 2D/3D Wide Monitor
1/51
1. Introduction This manual contains instructions for installing and operating HYUNDAI IT CORP. S465D.
HYUNDAI IT CORP. S465D is a highly ergonomic color display unit.
46” viewable WUXGA LCD
High quality screen re-scaling capability
100-240V AC input voltage
VESA DPMS (Display Power Management Signaling)
VESA DDC1/2B compatibility
Advanced digital On-Screen-Display controls
Digital Signal Input by HDMI Compatability
Fast and accurate auto adjustment
Most advanced image scaling
Supporting VESA Flat Panel Monitor Physical Mounting Interface
2D/3D Convertible
•
•
•
•
•
•
•
•
•
•
•
2. Safety Information The socket-outlet shall be installed near the equipment and shall be easily accessible.
This Monitor has been engineered and manufactured to assure your safety.
You can prevent serious electrical shock and other hazards by keeping in mind the following:
If there is a persistent accumulation of dusts or water on the
plug, please make sure to wipe it off using a dry cloth.
- It may cause a fire or an electric shock.

S465D
Multi Function 2D/3D Wide Monitor
2/51
Firmly plug in the power cord so that it does not pull out.
- An unstable connection may cause fire.
Do not use a damaged power cord or plug, or loose outlet.
- It may cause electric shock or fire.
Do not put a water bowl, vase, candle, bug repellant smoke,
cigarette, plants, or heavy thing on the monitor.
- It may cause electric shock or fire and also heavy things may
cause injury when they fall.
Do not install in a place where there is oil, smoke, excessive
humidity, or where water may be sprinkled on it.
- This may cause electric shock or fire.
Do not install on an unstable place or small support.
- This may cause the monitor to fall, resulting in serious injury
especially to children.

S465D
Multi Function 2D/3D Wide Monitor
3/51
Never attempt to open, fix, or modify your monitor.
- When there is a need for fixing, call a service center.
Fire or electric shock may be caused.
Do not put a metallic object like chopstick, wire, or puncher or in
flammables like paper or a match in a vent, headphone jack, or
AV jacks of the monitor.
- Electric shock or fire may be caused.
When the monitor produces abnormal noise, burning smell, or
smoke, unplug the monitor immediately and call a service center.
- Electric shock or fire may be caused.
Please avoid touching the panel at the rear of monitor as it is
producing high temperature.
- Direct contact with the hot surface may cause physical burns.
Do not place any heat sources such as radiators and heat
registers, etc. near the monitor.
- It may cause a fire.

S465D
Multi Function 2D/3D Wide Monitor
4/51
Do not block ventilating slits with a tablecloth.
- Blocking the ventilation slits may produce internal heat increase,
resulting in a fire.
Do not allow children to climb or play on the monitor.
- This may cause the monitor to fall resulting in serious injury.
Do not place toys and cookies, etc. on the monitor, which may
attract children’s attention.
- This may cause the monitor to fall, resulting in serious injury.
When cleaning the monitor, make sure to disconnect the power
plug and use a dry, soft cloth for a cleanup.
- Please avoid using chemicals such as wax, benzene,
alcohol, thinner, mosquito spray, air freshener, lubricant or
synthetic detergent.
Unplug when you do not use your monitor for a long time.
- If dust is stacked on the monitor, electric shock or fire may be
caused from heat, fire, or deterioration of insulation.

S465D
Multi Function 2D/3D Wide Monitor
5/51
When moving the monitor, two or more people are advised to carry it.
- This may cause damage to the unit or personal injury.
Never touch the power plug or outlet with wet hands.
- This may cause electric shock.
Do not install the product on the floor.
- This may cause the monitor to fall resulting in serious injury.
Unplug the product during lightning or thunderstorms and never
touch the antenna cable.
- It may cause a fire or an electric shock.
In the event of damaging or dropping the product, switch off the
power and remove the plug.
- Using a damaged product may cause an electric shock or a fire.
- Contact your local service center.

S465D
Multi Function 2D/3D Wide Monitor
6/51
Before moving the product, ensure to switch off the power and
unplug all the electrical cords and the external connection cords
such as an antenna cable and other source connections, etc.
- Electrical cords may be damaged, resulting in a fire or an
electrical shock.
Ensure the power cord doesn’t trail across any hot objects like a
heater.
- This may cause a fire or an electric shock.
Consult a service center or customer service for inside cleaning
about once a year.
- When dust is piled inside the monitor for a longtime, fire or
malfunction may be caused.
Cleaning and Maintenance- To avoid to risk of electric shock, do not disassemble the Cabinet of display Unit. The Cabinet
is not user-serviceable. Remember to unplug the display unit from the power outlet before
cleaning.
Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or
benzene, abrasive cleaners or compressed air.
Do not wipe the screen with a cloth or sponge that could scratch the surface.
To clean your antistatic screen, use water and a special microfiber screen cleaning tissue used
in optical lens cleaning, or lightly dampen a soft, clean cloth with water or a mild detergent.
If the instructions above do not help in removing stains, contact an authorized service agent.
•
•
•
•
•