Converters.TV 15113 User manual

HDMI HDBaseT-Lite CAT5e/6/7
RepeaterID# 15113
Operation Manual

Intro uction
This HDBaseT™ Repeater allows HDBaseT Lite systems to be extended
and cascaded. The model supports the highest quality of uncompressed
high definition HD video up to 4K×2K (Ultra HD), up to 8 channels of
uncompressed multi channel audio, RS 232 and IR control systems,
complete HDBaseT 3Play convergence with just a simple connection over a
single CAT5e/6/7 cable.
Features
•HDMI, DVI and HDCP compliant
•Supports 3D over HDMI and 4k×2k (Ultra HD) resolution
•Supports CEC bypass
•Doubles up the distance of HDBaseT transmission between
HDBaseT
•Lite transmitter and receiver, with a single repeater. The
transmission
•distance can be added up 60 meters for every additional repeaters
up to 3 tiers
•Uncompressed video support up to 1080p@60Hz/36 bit and 4k×2K
(Ultra HD)
•Audio support up to LPCM 7.1CH, Dolby TrueHD and DTS HD
Master Audio
•3Play Convergence: Full uncompressed HD Video, Audio and
•Controls (IR and RS 232) over a single CAT5e/6/7 cable
•Installation friendly
Applications
•HDBaseT Lite signal extension up to 60m (up to 120m with
additional optional Repeater unit), 180m (1080p) in total (cascaded
3 times)
•Extending a zone's output range
•Cascading HDBaseT Lite equipment
System Requirements
HDBaseT Lite Transmitter and HDBaseT Lite Receiver with CAT5e/6/7
connection cables.

Operation Controls
an Functions
Front Panel
1. MODE LED
The yellow LED will flash when the unit is powered or when an active
receiver is connected.
2. CAT5e/6 OUT
Connect to the receiver unit with a single CAT5e/6/7 cable (up to 60m).
3. LINK LED
The green LED will illuminate when output is connected to an active
receiver. The LED will flash if there is a problem with the connection.
Back Panel
1. MODE LED
The yellow LED will flash when the unit is powered or when an active
transmitter is connected.
2. CAT5e/6 IN
Connect to the transmitter unit with a single CAT5e/6/7 cable (up to 60m).
3. LINK LED
The green LED will illuminate when output is connected to an active
transmitter. The LED will flash if there is a problem with the connection.
4. POWER
The LED will illuminate blue when the unit is connected to a power supply.
5. DC 24V
Connect the 24V DC power adaptor included in the package to the unit and
plug it into an AC outlet.

Specifications
Vi eo Ban wi th 
Input Port 
Output Port 
Resolution Support 
CAT5e/6 In/Out Distance !"#!$
Power Supply %&' () (!*+,*$,)
- ./$!0,1
Dimensions ##'21##'&1##'1
Weight 3
Chassis Material !*4
Silkscreen Color (45$
Operating Temperature 6666
Storage Temperature 789:;<:=:>9:;<:?:7@:;A:=:B@9:;A
Relative Humi ity CDE'+"+/"+,++31
Power Consumption 2

Connection Diagram