Converters.TV 787 User manual

CAT6 to CAT6 Repeater
- ID# 787
Operation Manual

Introduction
This is the most advanced solution for CAT6 to CAT6 signal repeater. These
two CAT6 connectors are for Video and DDC ports of transmitter and
receiver which isolates the DDC capacitances of the two sides of the
buffer. This is compatible with HDMI v .3 specifications, a cutting-edge
technology which defines the supports to transfer Deep Color ( 2
bits/color) video and new lossless compressed (Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio) digital audio.
Features
●HDMI .3, HDCP . and DVI . compliant.
●Serial data rate at up to 2.25Gbps, capable of supporting the following
digital video formats in Deep Color Mode at up to 36 bits ( 2bits/color):
●DTV resolutions: 480i, 576i, 480p, 576p, 720p, 080i to 080p.
●Supports CAT-6 cables for data/DDC transmission.
●Supports equalize and recover incoming TMDS data before re-transmitting
them with optimal quality regardless of the incoming signal quality.
●Supports high definition resolution, the cable distance test with 080p/8bits
resolution the Input/Output source can run up to 45/45 meters. If
080p/ 2bits resolution the Input/Output source can run up to 5/ 5
meters.
●Supports CEC bypass.
●Supports xvYCC.
Operation
Controls and
Functions
Front Panel
1. DDC input: Connect the DDC input to the DDC output of the transmitter
using CAT-6 cable.
2. Video input: Connect the video input to the video output of the
transmitter unit using CAT-6 cable.

Rear Panel
1. Video output: Connect the video output to the video input of the
receiver
unit using CAT-6 cable.
2. DDC output: Connect the DDC output to the DDC input of the receiver
unit using CAT-6 cable.
Installation and
Connection
Specifications
Input Ports x HDMI, x DDC
Output Port x HDMI, x DDC
Dimensions (mm) 50(W) x 72(D) x 23(H)
Weig t(g) 06
C assis Material Aluminum
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C