
Introduction
The HDMI to HDMI Repeater-Extender 1 input - 1 output is the most
advanced solution to HDMI signal distribution. This product is compatible
to HDMI v1.3 specifications, a cutting-age technology hich defines the
support to transfer Deep Color (10-bit and 12-bit ) video and ne lossless
compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio)
digital audio, ith a high band idth up to 225MHz (6.75Gbps). Besides
splitting and distributing, the HDMI to HDMI Repeater-Extender 1 input - 1
output also does signal amplification and equalization, so as to provide
high performance I/O of audio and video. Each of the buffered output
can run up to 30 meters and can be cascaded.
Features
HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.
Deep color video up to 12bit, 1080p@60Hz.
One HDMI source to connect to one HDMI display simultaneously.
HDCP keysets allo s each output to ork independently hen
connecting to a HDMI display.
Split a HDMI source to one output ithout signal loss.
Supports DVI source and DVI display by using HDMI to/from DVI
adapter cable.
Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).
Supports a ide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p.
HDMI cable distance test ith 1080p resolution: Input/Output source
can run up to 30M/5.1CH.
Full HDCP Compliant.
Operating Functions
and Controls
Front Panel
1 HDMI Output: Connect output port to the HDMI display.