Converters.TV 762 User manual

Wireless PC to TV
- ID# 762
Operation Manual

Introduction
The WiFi Smart Player to TV can send video/audio signals from a smart phone,
PC or Noteboo through Wi-Fi to a TV and use it as the primary display. The
SmartPlayer is designed as a DLNA DMR (Digital Media Renderer) which
means users can easily send audio, video and pictures from a computer
wirelessly to TV. This device can also act as a Wi-Fi Access Point for users to
access a wired Internet connection with their laptops or smart phones.
Displaying audio, video and pictures through networ streaming the WiFi Smart
Player is a simple yet incredibly useful device for sharing content through
networ streaming.
Applications
●Wireless PC/NB to TV
●Wireless Smart phone to TV
●Wire PC/NB to TV
●Wi-Fi Access Point
System
Requirements
In order to run the application smoothly, please refer to the following
hardware recommendation.
Desktop/Workstation PC:
●CPU: Intel Core 2 Duo 2.0G or better
●Chipset: Intel 965 series chipset or better
●Memory: DDR2-800, 2GB or better
●Graphic Card: NVIDIA GeForce 8400GS / ATI Radeon X300 or better
●Networ : 802.11 g/n Wi-Fi and/or 100/1000 Mbps Ethernet
Notebook/Laptop PC:
●CPU: Intel Core 2 Duo 2.0G or better
●Chipset: Intel 965 series chipset or better
●Memory: DDR2-800, 2GB or better
●Graphic: Chipset integrated (Intel X3100 Graphic) or better or NVIDIA
GeForce Go 8200M / ATI Radeon Mobility X300 standalone graphic chip or
better
●Networ : 802.11 g/n Wi-Fi and/or 100/1000 Mbps Ethernet
Supported OS:
●Windows 7, x86 and x64
●Windows Vista (Service Pac 1 or later), x 86 and x 64
Windows XP (Service Pac 3 or later)
Features
●Support PC to TV and Smart Phone to TV
●Can be a Wi-Fi AP
●WiFi Smart Player is a device that designed as a DLNA DMR
●(Digital MediaRenderer) device.
●Display various picture, audio, and video contents through networ
streaming.
●USB port for Mouse / Keyboard.
●USB flash dis for firmware upgrade.

Operation Controls
and Functions
Front Panel
① DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to AC
wall outlet.
②HDMI out: Connect the output port to the HDMI TV/display.
③Ethernet IN: This slot is to connect with CAT5e/6 cable from your networ
system or PC/Laptop for a wire connection of input signal sending.
ear Panel
① USB Port 1 & 2: These slots are to connect with Wi-Fi module and USB
devices such as Keyboard and Mousel.
Left Panel
① USB Port 3: This slot is to connect with Wi-Fi module and USB devices such
as eyboard and mouse for control.

Top Panel
① Power LED: This blue LED will illuminate when the device is connected with
power supply.
USB Dongle
① USB Dongle: Plug this Wi-Fi dongle into the Smart Player's USB port for signal
transmission

Soft are
installation and
un-installation
The following sections describe the procedures for installing the PC2TV
device’s drivers. Insert the provid CD driver into the input source’s CD-ROM
driver then begin the installation.
Software Installation
 Insert the CD driver included in the pac age and double clic on the
PC2TV.exe executable file to start the setup process.
 Browse the folder where the files should be unpac ed and clic
“Continue” to start Installation.
 InstallShield Wizard will install PC2TV on your input source device and
clic “Next” to continue.
 Add program icons to the program folder. You may type a new folder
name or select one from the existing folders list and clic “Next” to continue.

 Press “Analysis” to evaluate your computer system.
 The Benchmar Information will show whether or not your computer
system is matching with the product requirement.
 After the setup is complete clic on Finish and restart your source device.

Uninstall the Computer Software
Follow the steps below to uninstall the PC2TV Software
Step 1: Open the Control Panel: Start a Control Panel a Uninstall a program.
Step 2: Select PC2TV execute file and clic to remove.
Step 3: Clic on Finish to complete the un-install process.

Configuring your application to use the eceiver
Configure your PC or Smart Phone with Ethernet connection, or becoming
the Internet access point. Keep in mind, however, that the number, thic ness
and location of walls, ceilings or other objects that the wireless signals must
pass through, may limit the range. Typical ranges vary depending on the
types of materials and bac ground RF(radio frequency) noise in your usage
area.
Computer Easy Connection
Step 1: Go to Start > Settings > Control Panel. Double-clic the System and
Networ and Internet Options Icon. From the Options Icon, clic the button to
connect to the Internet and select Wireless Option to use a wireless networ
and then choose “PC2TV_PRO_ AccessPoint” to connect to the Internet.
Step 2: Clic the PC2TV icon “ ” on the windows des top, to run the
utility.
Step 3: Clic “Play” to establish computer contents to display.
Step 4: Clic “Stop” to disconnect the connection.
Smart Phone Easy Connection
To begin with the Smart Phone connection, the user need to ma e sure if the
Smart Phone support DLNA (Digital Living Networ Alliance) function. If the
Smart Phone is not supporting DLNA, users can download the DLNA software
li e "SKIFTA" or "Twon y media" from Android mar et or APP store.
Configure your Internet settings form the Smart Phone devices:
• From the Home screen, sweep your finger downward to display the
Notification Panel.
• Touch Wi-Fi to turn Wi-Fi ON.
• When your phone completes a scan, touch a Wi-Fi networ to
connect “CWF-901SP”.

• Select the PC2TV(DMR) for display system
 For non-DLNA Smart Phone, users may download and execute softwares
li e “Twon y” and “S ifta”.
 For Samsung DLNA Smart Phone, please execute “AllShare” software.
 For HTC DLNA Smart Phone, Please execute “Connected Media”.
Note: The Smart Phone's DLNA installation may be vary with different
brand and therefore, the instruction above are for reference only. For other
DLNA Smart Phone not lists in this user manual, please refer to DLNA Smart
Phone user manual or contact your Smart Phone customer help line to start
with.
Access Point Application
Before you begin, connect an active Ethernet cable to the Ethernet port of
the device. Then you can connect multiple computers or Wi-Fi devices
through the CWF-901SF. If your Wi-Fi devices running speed are become
slowly, please disconnect some of the lin s and Wi-Fi devices to release more
bandwidth.
Configure your Internet settings from the Computer devices:
●Clic on the networ connection on the bottom right hand corner
and select CWF-901SP or
●Go to Start > Settings > Control Panel. Double-clic the System and
Networ and Internet Options Icon. From the Options Icon, clic the
button to connect to the Internet and select Wireless Option to use a
wireless networ and then choose “CWF-901SP” to connect to the
Internet.
Connection

Specifications
Host Interface 1 x 802.11n Wi-Fi and 100/1000Mbps Ethernet
Output port 1 x HDMI
Extender Port 3 x USB (Keyboard and Mouse only)
Video Supports (DLNA DMR) WMV, AVI, MPEG-1/2/4, 3GP &
MOV with 2CH with bit-rate under 15Mbps
Audio Supports ( DLNA DMR) LPCM, MPEG-1, WMA, WAV,
MPEG-4, AAC, OGG, 3GP & MP3 with 2CH
esolution Supports DLNA DM : Up to 1920 x 1080
PC to TV: Up to 1280 x 720 or
Up to 1920 x 1080 with Sandy Bridge
Bridge ESD Protection Human body model:
± 8 V (air-gap discharge)
± 4 V (contact discharge)
Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/UL
certified)
Dimensions (mm) 100(W) x 70(D) x 20(H)/SP, 56(W) x 20(D) x 9(H)
Weight(g) 100/SP, 8
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0°C ~ 40°C/32°F ~104°F
Storage Temperature -20°C ~ 60°C/-4°F ~140°F
elative Humidity 20~90%RH (non-condensing)
Power Consumption 5.5W