Operation Instruction
Press and hold the ON/OFF for 2 seconds to turn on, and then
press 2 seconds to turn off
If there is no operation after startup, the screen will display the
current air outlet temperature, air volume and mode
When the air conditioner is turned on, it will automatically enter
the cooling mode. The snowflake icon on the screen indicates
that it is cooling. If you only need air blow without refrigeration,
you can choose sleep mode and then snowflake icon will
disappear. Press the sleep mode key to switch between sleep
mode and cooling mode
Press the temperature up and down keys to adjust the air outlet
temperature. The temperature digital flashing display indicates
that the setting is in progress. If you press and hold the
temperature continuously, you can quickly and continuously add
or subtract the set temperature. After stopping the operation, the
flashing stops for 5 seconds, and automatically exits the setting
state and restores the display of the actual outlet temperature.
When the outlet temperature drops to the set value, the system
will automatically reduce the cooling capacity and power
consumption to energy saving. When the temperature rises,
turbo will be resumed
Press the air volume key to adjust and set the required air
volume. The air volume grid flashes to indicate that it is setting.
The three-gear wind speed can be set. After stopping the
operation, the flashing will stop for 5 seconds, and the setting
state will be automatically exited
