
IMPORTANT RECOMMENDATIONS
1. Never shake your self-winding watch to get it started. The
movement can be damaged in the process.
2. Before you start wearing your Cornavin Automatic Watch you
will need to wind it manually. Pull the crown into position 1 and
turn the crown clockwise about 20 times. Then set the time. See
page 7 for visual instructions.
3. Avoid Magnetic Fields and do not place your watch in their
vicinity. Magnetic fields can derive from sources such as mobile
phones, tablets, laptops as well as other electromagnetic
appliances.
4. Always make sure the crown of your watch is pushed down fully
to prevent moisture from entering your watch.
5. Everyday wear and ageing of seals can affect the water-
resistance of your watch and it can therefore not be guaranteed
over time. We recommend having the water-resistant seals of your
watch tested once a year by an authorized Cornavin service center.
IMPORTANT RECOMMENDATIONS
6. Protect your watch against sudden temperature changes or
extreme temperatures (above 60C/140F and below 0C/32F).
7. Avoid bringing your watch in contact with any chemical prod-
ucts which may damage the case, seals or strap. (Perfume, cosmet-
ics, solvents, detergents etc.)
8. Avoid shocks or impacts to your watch. In the case of a violent
impact please have your watch checked by an authorized Cornavin
service center.
9. Clean your watch regularly, and anytime it has been immersed
in salt water. Use lukewarm, soapy water then dry with a soft cloth.
10. Your Cornavin watch needs maintenance form time to time.
We recommend that you have your watch checked and possibly
serviced every 3 to 4 years. However, the need for maintenance
depends on personal usage, climate and how well you look after
your watch. To ensure the highest standards of servicing, please
contact an approved Cornavin service center or hand it to and
official Cornavin retailer.
5 6