Cosmoplast Cedargrain Storage Shed with Flat Lid 1200L User manual

User ManualUser Manual



WARNING
Make sure fingers don't get squeezed
between parts during assembly

• To avoid any sort of damage, read and implement every step in the instruction
manual carefully.
• Keep fingers away from connectors to avoid risk of injury during assembly.
• Be careful when handling components, some parts have sharp edges. It is
recommended that you always wear work gloves during assembly.
• It is strictly NOT recommended to stand on the roof of the Storage Shed as
the force can cause damage to the product and serious injuries to the user.
• Wash using water and mild detergent solution. Do not use a stiff brush or
abrasive cleaners as these may stain or damage the Storage Shed.
• Weatherproof – UV protected.
• Lockable with a padlock (Padlock not included in package).
• Integrated support for shelf, in case a shelf is added (Shelf not included in
package).
• Do not keep heavy items against the walls, as this may cause distortion.
• Avoid storing flammable, hazardous, and hot items that may deteriorate the
plastic.
• It is strictly not allowed for children to play inside the box as it may cause
suffocation.
• In case of fire, do not attempt to extinguish any burning polypropylene with
water.
CARE AND SAFETY
PRODUCT LIABILITY CLAUSE
Cosmoplast shall not be responsible for any injury caused to the user during
assembly, usage, and possession.
LIMITED 2 - YEAR WARRANTY
Cosmoplast has built its reputation through its commitment to bringing quality,
durability, and innovation to its products since 1970. We ensure that the product
confirms to highest quality and reliability standards before it reaches the
customer. However, in case any defect is noticed during assembly or usage,
please contact us through email, social media, or by phone. Our warranty is
valid for two years from the initial date of purchase, and a proof of purchase
should be presented. Damages caused by: Use of force, incorrect assembly,
use of heat, neglect, spilling any form of hazardous liquid, storing above
capacity, and natural disasters are excluded from the warranty.

Parts Pieces
Flat Cover Cap (FCC) 2
Flat Top Cover (FTC) 1
Front Door Left (FDL) 1
Front Door Right (FDR) 1
Side Cover Left (SCL) 1
Side Cover Right (SCR) 1
Back Cover (BC) 2
Base (B) 1
Front Door Hinge Left (FDHL) 1
Front Door Hinge Right (FDHR) 1
Bottom Slide (BS) 1
Bottom Hinge (BH) 1
Handle (HD) 1
Hinge and Hinge Bracket (HHB) 1

Unpacking
For further identification of the parts, please refer to the engravings of the part names
on the inner side of the parts.
Please contact Cosmoplast if you have any problem or discover any missing parts.
Top Cover Lock (TCL) 1
Hook (HK) 2
Bottom Hook (BHK) 2
Damper Cylinder (DC) 2
Chain (CH) 2
Metal Rod (MR) 1
Screws (S) 24mm 45
Parts Pieces

22
Note: Remove the Metal
Rod and set it aside; it
will be used in Step 4.
11
Parts Required
x 1
SCL
x 1
SCR
x 1
B
1
2
3
Parts Required
x 2
BC
x 4
S
Parts Required
x 2
BC
Click

Note: Fasten the screws in positions A & B first to secure the alignment of the
Side Covers.
A
B
6
Parts Required
x 16
S
4
5
Parts Required
x 1
MR

7
Parts Required
x 2
S
x 1
TCL
Parts Required
x 4
S
x 2
FCC
Parts Required
x 4
S
x 2
DC

Parts Required
x 2
S
x 2
HK
Parts Required
x 4
S
x 2

Parts Required
x 1
FDR x 3 S
Parts Required
x 1
FDL x 2 S
112233
Parts Required
x 1
FDR x 4 S
x 1
BS
x 1
BH
x 1
HHB

Parts Required
x 1
FDHR
x 1
FDHL
16
Click
11
22
Click

Parts Required
x 2
CH
x 2
BHK
Shelves and screws are not included in the packing. Mark the locations of the screws to align each shelf, and
screw tightly in position.
Note: This shed can fit up-to 2 240L waste bins (bins are sold separately).
It is recommended to use 4 screws per shelf
(2 on each side).
1365
2965
25
Optional DIY Custom Shelves Installation

To lock the
Front Doors
To lock the
Front Doors
and Lid
Directions of Use
Directions of Locking