COUNCIL ROCK TELiG User manual

Quick Start
Guide
USER MANUAL
Contact COUNCIL ROCK Support at:
[e-mail]
Our technical support number is available
Mon-Fri, 9am-5pm Eastern Time
1-888-970-2994

CONTENTS
• TELiG Unit
• Power Cord
• Quick Start Guide
SETUP
1. 4FF SIM Card Installaon
a) Remove the 4 screws on
the back of the device with
a T10 TORX bit
b) Install the SIM cards into
the SIM slot(s)
See
Video 
2. Connect Antennas
3. Connect Power Supply
to Power Cord
4. Connect Power Cord
(green block) to front panel
5. Turn on Power Supply
CONNECTING
TO WEB ADMIN
1. Connect ethernet cable from
your PC to ETHERNET 1
(front panel)
2. Congure the ethernet
interface on your laptop to be
10.0.0.100/24.
3. With a web browser, navigate
to hps://10.0.0.1. Conrm
the security excepon if it
is presented (this is a self-
signed cercate used by the
TELiG’s web server)
4. Admin credenals are set up
for each unit based on the
last 6 digits of the unit serial
number:
a) User: root
b) Password:
5. At the login screen, enter
your credenals.
6. For each SIM card installed,
an Access Point Name (APN)
must be congured.
a) Navigate to Network
> SIMs
b) Note the interface for
each SIM in the General
Info secon
c) In the APNs secon,
use the text boxes listed
under the corresponding
interface to enter each
SIMs APN.
d) Click SAVE & APPLY
7. The unit should display
a solid green light and
be ready to use
TECHNICAL SUPPORT
If you are having diculty with
setup, verify that:
• The unit is receiving power
• Power, RF and data
connecons are secure
• The unit’s conguraon
(primarily IP address)
is correct
Refer to the User Manual
for further details on
unit conguraon and
troubleshoong.
Contact COUNCIL ROCK
Support at:
[e-mail]
Our technical support
number is available
Mon-Fri, 9am-5pm
Eastern Time
1-888-970-2994
Council_Rock_SECRET_######