CREVIS GL-9087 Instruction manual

Page 1 FnIO G-Series
FnIO G – Series
GL-9087
Quick start manual
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 2 FnIO G-Series
DO UMENT HANGE SUMMARY
REV PAGE REMARKS DATE EDITOR
1New Document 2019. 12. 12. SJ Hwang
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 3 FnIO G-Series
CONTENTS
1. Node ID setting ….....................….......................................................... 4
1.1 Dip switch …..................................................................................... 4
2. TIA Portal V14 ….............................…................................................... 5
2.1 Import GSDML file …...................…............................................... 5
2.2 Hardware configuration setting ….................................................... 6
2.3 I/O test ….......................................................................................... 9
2.4 hange I/O parameter ….................................................................. 11
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 4 FnIO G-Series
1. Node ID setting
1.1 Dip switch
- You can set the Node ID with dip switch.
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 5 FnIO G-Series
2. TIA Portal V14
2.1 Import GSDML file
(1) Option → Manage general station description files (GSD)
(2) heck GSDML file → Install
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 6 FnIO G-Series
2.2 Hardware configuration setting
(1) Add new device
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 7 FnIO G-Series
(2) Network view → Add GL-9087 → onnect
(3) hange module name → Add I/O modules → heck IE V2.2 LLDP
- Module name : GL9087-XX(Node ID)
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 8 FnIO G-Series
(4) Download to device
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 9 FnIO G-Series
2.3 I/O test
(1) Watch and force tables → Force table
(2) reate new force table → heck ‘F’ → Force all
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 10 FnIO G-Series
(3) Watch and force table → Watch table
(4) reate new watch table → Start monitoring
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr

Page 11 FnIO G-Series
2.4 hange I/O parameter
(1) Device view → heck module → General → Module parameters
(2) Download to device
Copyright(C) CREVIS Co.,Ltd Support [phone] RL: www.crevis.co.kr